The following packages will be installed:
 perl-Clone 
Fetching README...  0%100%100%100%100%100%Done
Fetching perl-Clone.SlackBuild...  0%100%100%100%100%100%Done
Fetching perl-Clone.info...  0%100%100%100%100%100%Done
Fetching slack-desc...  0%100%100%100%100%100%Done
Clone-0.45/
Clone-0.45/Changes
Clone-0.45/MANIFEST
Clone-0.45/t/
Clone-0.45/README.md
Clone-0.45/Clone.xs
Clone-0.45/META.yml
Clone-0.45/Makefile.PL
Clone-0.45/Clone.pm
Clone-0.45/META.json
Clone-0.45/t/04tie.t
Clone-0.45/t/07magic.t
Clone-0.45/t/dclone.t
Clone-0.45/t/dump.pl
Clone-0.45/t/05dtype.t
Clone-0.45/t/01array.t
Clone-0.45/t/06refcnt.t
Clone-0.45/t/03scalar.t
Clone-0.45/t/08fieldhash.t
Clone-0.45/t/02hash.t
Clone-0.45/t/tied.pl
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Clone
Writing MYMETA.yml and MYMETA.json
cp Clone.pm blib/lib/Clone.pm
AutoSplitting blib/lib/Clone.pm (blib/lib/auto/Clone)
Running Mkbootstrap for Clone ()
chmod 644 "Clone.bs"
"/usr/bin/perl5.34.0" -MExtUtils::Command::MM -e 'cp_nonempty' -- Clone.bs blib/arch/auto/Clone/Clone.bs 644
"/usr/bin/perl5.34.0" "/usr/share/perl5/ExtUtils/xsubpp"  -typemap '/usr/share/perl5/ExtUtils/typemap'  Clone.xs > Clone.xsc
mv Clone.xsc Clone.c
cc -c   -D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2 -O3   -DVERSION=\"0.45\" -DXS_VERSION=\"0.45\" -fPIC "-I/usr/lib/perl5/CORE"   Clone.c
rm -f blib/arch/auto/Clone/Clone.so
cc  -shared -O2 -march=i586 -mtune=i686 -L/usr/local/lib -fstack-protector-strong  Clone.o  -o blib/arch/auto/Clone/Clone.so  \
      \
  
chmod 755 blib/arch/auto/Clone/Clone.so
Manifying 1 pod document
"/usr/bin/perl5.34.0" -MExtUtils::Command::MM -e 'cp_nonempty' -- Clone.bs blib/arch/auto/Clone/Clone.bs 644
PERL_DL_NONLAZY=1 "/usr/bin/perl5.34.0" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/01array.t ...... ok
t/02hash.t ....... ok
(?^:abcdefg) vs (?^:abcdefg) at t/03scalar.t line 133.
t/03scalar.t ..... ok
t/04tie.t ........ ok
t/05dtype.t ...... ok
t/06refcnt.t ..... ok
SV = PVMG(0x992c66c) at 0x986d460
  REFCNT = 1
  FLAGS = (SMG,POK,pPOK,UTF8)
  IV = 0
  NV = 0
  PV = 0x9920fc0 "a\r\n"\0 [UTF8 "a\r\n"]
  CUR = 3
  LEN = 10
  MAGIC = 0x988aee0
    MG_VIRTUAL = &PL_vtbl_utf8
    MG_TYPE = PERL_MAGIC_utf8(w)
    MG_LEN = -1
    MG_PTR = 0x98ba340
       0: 2 -> 2
       1: 0 -> 0
SV = PVMG(0x992c6c0) at 0x99138d0
  REFCNT = 1
  FLAGS = (SMG,POK,pPOK,UTF8)
  IV = 0
  NV = 0
  PV = 0x9925660 "a\r\n"\0 [UTF8 "a\r\n"]
  CUR = 3
  LEN = 10
  MAGIC = 0x9916530
    MG_VIRTUAL = &PL_vtbl_utf8
    MG_TYPE = PERL_MAGIC_utf8(w)
    MG_LEN = -1
    MG_PTR = 0x99165b0
       0: 2 -> 2
       1: 0 -> 0
t/07magic.t ...... ok
t/08fieldhash.t .. ok
t/dclone.t ....... ok
All tests successful.
Files=9, Tests=86,  0 wallclock secs ( 0.02 usr  0.00 sys +  0.14 cusr  0.01 csys =  0.17 CPU)
Result: PASS
"/usr/bin/perl5.34.0" -MExtUtils::Command::MM -e 'cp_nonempty' -- Clone.bs blib/arch/auto/Clone/Clone.bs 644
Manifying 1 pod document
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
Installing /usr/src/slapt-src/perl/perl-Clone/package-perl-Clone/usr/lib/perl5/vendor_perl/auto/Clone/Clone.so
Installing /usr/src/slapt-src/perl/perl-Clone/package-perl-Clone/usr/lib/perl5/vendor_perl/Clone.pm
Installing /usr/src/slapt-src/perl/perl-Clone/package-perl-Clone/usr/lib/perl5/vendor_perl/auto/Clone/autosplit.ix
Installing /usr/src/slapt-src/perl/perl-Clone/package-perl-Clone/usr/man/man3/Clone.3
Appending installation info to /usr/src/slapt-src/perl/perl-Clone/package-perl-Clone/usr/lib/perl5/perllocal.pod

Slackware package maker, version 3.14159265.

Searching for symbolic links:

No symbolic links were found, so we won't make an installation script.
You can make your own later in ./install/doinst.sh and rebuild the
package if you like.

This next step is optional - you can set the directories in your package
to some sane permissions. If any of the directories in your package have
special permissions, then DO NOT reset them here!

Would you like to reset all directory permissions to 755 (drwxr-xr-x) and
directory ownerships to root.root ([y]es, [n]o)? n

Creating Slackware package:  /usr/src/slapt-src/perl/perl-Clone/perl-Clone-0.45-i586-1salix15.0.txz

./
install/
install/slack-desc
usr/
usr/doc/
usr/doc/perl-Clone-0.45/
usr/doc/perl-Clone-0.45/Changes
usr/doc/perl-Clone-0.45/README.md
usr/doc/perl-Clone-0.45/perl-Clone.SlackBuild
usr/lib/
usr/lib/perl5/
usr/lib/perl5/vendor_perl/
usr/lib/perl5/vendor_perl/Clone.pm
usr/lib/perl5/vendor_perl/auto/
usr/lib/perl5/vendor_perl/auto/Clone/
usr/lib/perl5/vendor_perl/auto/Clone/Clone.so
usr/lib/perl5/vendor_perl/auto/Clone/autosplit.ix
usr/man/
usr/man/man3/
usr/man/man3/Clone.3.gz

Slackware package /usr/src/slapt-src/perl/perl-Clone/perl-Clone-0.45-i586-1salix15.0.txz created.

Installing package perl-Clone-0.45-i586-1salix15.0...
| perl-Clone (Recursively copy Perl datatypes)
| 
| This module provides a clone() method which makes recursive copies
| of nested hash, array, scalar and reference types, including tied
| variables and objects.
| 
| Homepage: https://metacpan.org/pod/Clone
| 
| 
| 
| 
| 
|