The following packages will be installed: perl-IO-Tty Fetching README... 0%100%100%100%100%100%Done Fetching perl-IO-Tty.SlackBuild... 0%100%100%100%100%100%Done Fetching perl-IO-Tty.info... 0%100%100%100%100%100%Done Fetching slack-desc... 0%100%100%100%100%100%Done IO-Tty-1.14/ IO-Tty-1.14/Tty.xs IO-Tty-1.14/t/ IO-Tty-1.14/t/test.t IO-Tty-1.14/t/pty_get_winsize.t IO-Tty-1.14/Tty.pm IO-Tty-1.14/ChangeLog IO-Tty-1.14/Makefile.PL IO-Tty-1.14/try IO-Tty-1.14/MANIFEST IO-Tty-1.14/README.md IO-Tty-1.14/MANIFEST.SKIP IO-Tty-1.14/Pty.pm IO-Tty-1.14/META.yml IO-Tty-1.14/META.json Now let's see what we can find out about your system (logfiles of failing tests are available in the conf/ dir)... Looking for _getpty()...... not found. Looking for getpt()........ FOUND. Looking for grantpt()...... FOUND. Looking for openpty()...... FOUND. Looking for posix_openpt(). FOUND. Looking for ptsname()...... FOUND. Looking for ptsname_r().... FOUND. Looking for sigaction().... FOUND. Looking for strlcpy()...... not found. Looking for ttyname()...... FOUND. Looking for unlockpt()..... FOUND. Looking for libutil.h...... not found. Looking for pty.h.......... FOUND. Looking for sys/pty.h...... not found. Looking for sys/ptyio.h.... not found. Looking for sys/stropts.h.. not found. Looking for termio.h....... FOUND. Looking for termios.h...... FOUND. Looking for util.h......... not found. Checking which symbols compile OK... (sorry for the tedious check, but some systems have not too clean header files, to say the least; '+' means OK, '-' means not defined and '*' has compile problems...) +B0 +B110 +B115200 +B1200 +B134 +B150 -B153600 +B1800 +B19200 +B200 +B230400 +B2400 +B300 -B307200 +B38400 +B460800 +B4800 +B50 +B57600 +B600 +B75 -B76800 +B9600 +BRKINT +BS0 +BS1 +BSDLY +CBAUD -CBAUDEXT +CBRK -CCTS_OFLOW -CDEL +CDSUSP +CEOF +CEOL -CEOL2 +CEOT +CERASE -CESC +CFLUSH +CIBAUD -CIBAUDEXT +CINTR +CKILL +CLNEXT +CLOCAL -CNSWTCH -CNUL +CQUIT +CR0 +CR1 +CR2 +CR3 +CRDLY +CREAD +CRPRNT +CRTSCTS -CRTSXOFF -CRTS_IFLOW +CS5 +CS6 +CS7 +CS8 +CSIZE +CSTART +CSTOP +CSTOPB +CSUSP -CSWTCH +CWERASE -DEFECHO -DIOC -DIOCGETP -DIOCSETP -DOSMODE +ECHO +ECHOCTL +ECHOE +ECHOK +ECHOKE +ECHONL +ECHOPRT +EXTA +EXTB +FF0 +FF1 +FFDLY -FIORDCHK +FLUSHO +HUPCL +ICANON +ICRNL +IEXTEN +IGNBRK +IGNCR +IGNPAR +IMAXBEL +INLCR +INPCK +ISIG +ISTRIP +IUCLC +IXANY +IXOFF +IXON -KBENABLED -LDCHG -LDCLOSE -LDDMAP -LDEMAP -LDGETT -LDGMAP -LDIOC -LDNMAP -LDOPEN -LDSETT -LDSMAP -LOBLK +NCCS +NL0 +NL1 +NLDLY +NOFLSH +OCRNL +OFDEL +OFILL +OLCUC +ONLCR +ONLRET +ONOCR +OPOST -PAGEOUT +PARENB -PAREXT +PARMRK +PARODD +PENDIN -RCV1EN -RTS_TOG +TAB0 +TAB1 +TAB2 +TAB3 +TABDLY -TCDSET +TCFLSH +TCGETA +TCGETS +TCIFLUSH +TCIOFF +TCIOFLUSH +TCION +TCOFLUSH +TCOOFF +TCOON +TCSADRAIN +TCSAFLUSH +TCSANOW +TCSBRK +TCSETA +TCSETAF +TCSETAW -TCSETCTTY +TCSETS +TCSETSF +TCSETSW +TCXONC -TERM_D40 -TERM_D42 -TERM_H45 -TERM_NONE -TERM_TEC -TERM_TEX -TERM_V10 -TERM_V61 +TIOCCBRK -TIOCCDTR +TIOCCONS +TIOCEXCL -TIOCFLUSH -TIOCGETC +TIOCGETD -TIOCGETP -TIOCGLTC +TIOCGPGRP +TIOCGSID +TIOCGSOFTCAR +TIOCGWINSZ -TIOCHPCL -TIOCKBOF -TIOCKBON -TIOCLBIC -TIOCLBIS -TIOCLGET -TIOCLSET +TIOCMBIC +TIOCMBIS +TIOCMGET +TIOCMSET +TIOCM_CAR +TIOCM_CD +TIOCM_CTS +TIOCM_DSR +TIOCM_DTR +TIOCM_LE +TIOCM_RI +TIOCM_RNG +TIOCM_RTS +TIOCM_SR +TIOCM_ST +TIOCNOTTY +TIOCNXCL +TIOCOUTQ -TIOCREMOTE +TIOCSBRK +TIOCSCTTY -TIOCSDTR -TIOCSETC +TIOCSETD -TIOCSETN -TIOCSETP -TIOCSIGNAL -TIOCSLTC +TIOCSPGRP -TIOCSSID +TIOCSSOFTCAR -TIOCSTART +TIOCSTI -TIOCSTOP +TIOCSWINSZ -TM_ANL -TM_CECHO -TM_CINVIS -TM_LCF -TM_NONE -TM_SET -TM_SNL +TOSTOP -VCEOF -VCEOL +VDISCARD -VDSUSP +VEOF +VEOL +VEOL2 +VERASE +VINTR +VKILL +VLNEXT +VMIN +VQUIT +VREPRINT +VSTART +VSTOP +VSUSP -VSWTCH +VT0 +VT1 +VTDLY +VTIME +VWERASE -WRAP +XCASE -XCLUDE -XMT1EN +XTABS >>> Configuration looks good! <<< Writing IO::Tty::Constant.pm... DEFINE = -DHAVE_DEV_PTMX -DHAVE_GETPT -DHAVE_GRANTPT -DHAVE_OPENPTY -DHAVE_POSIX_OPENPT -DHAVE_PTSNAME -DHAVE_PTSNAME_R -DHAVE_PTY_H -DHAVE_SIGACTION -DHAVE_TERMIOS_H -DHAVE_TERMIO_H -DHAVE_TTYNAME -DHAVE_UNLOCKPT Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for IO::Tty Writing MYMETA.yml and MYMETA.json cp Pty.pm blib/lib/IO/Pty.pm cp Tty/Constant.pm blib/lib/IO/Tty/Constant.pm cp Tty.pm blib/lib/IO/Tty.pm Running Mkbootstrap for Tty () chmod 644 "Tty.bs" "/usr/bin/perl5.34.0" -MExtUtils::Command::MM -e 'cp_nonempty' -- Tty.bs blib/arch/auto/IO/Tty/Tty.bs 644 "/usr/bin/perl5.34.0" "/usr/share/perl5/ExtUtils/xsubpp" -typemap '/usr/share/perl5/ExtUtils/typemap' Tty.xs > Tty.xsc mv Tty.xsc Tty.c cc -c -D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2 -O2 -march=i586 -mtune=i686 -DVERSION=\"1.14\" -DXS_VERSION=\"1.14\" -fPIC "-I/usr/lib/perl5/CORE" -DHAVE_DEV_PTMX -DHAVE_GETPT -DHAVE_GRANTPT -DHAVE_OPENPTY -DHAVE_POSIX_OPENPT -DHAVE_PTSNAME -DHAVE_PTSNAME_R -DHAVE_PTY_H -DHAVE_SIGACTION -DHAVE_TERMIOS_H -DHAVE_TERMIO_H -DHAVE_TTYNAME -DHAVE_UNLOCKPT Tty.c rm -f blib/arch/auto/IO/Tty/Tty.so cc -shared -O2 -march=i586 -mtune=i686 -L/usr/local/lib -fstack-protector-strong Tty.o -o blib/arch/auto/IO/Tty/Tty.so \ -lutil \ chmod 755 blib/arch/auto/IO/Tty/Tty.so Manifying 3 pod documents "/usr/bin/perl5.34.0" -MExtUtils::Command::MM -e 'cp_nonempty' -- Tty.bs blib/arch/auto/IO/Tty/Tty.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl5.34.0" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/pty_get_winsize.t .. ok # Configuration: -DHAVE_DEV_PTMX -DHAVE_GETPT -DHAVE_GRANTPT -DHAVE_OPENPTY -DHAVE_POSIX_OPENPT -DHAVE_PTSNAME -DHAVE_PTSNAME_R -DHAVE_PTY_H -DHAVE_SIGACTION -DHAVE_TERMIOS_H -DHAVE_TERMIO_H -DHAVE_TTYNAME -DHAVE_UNLOCKPT # Checking for appropriate ioctls: # TIOCNOTTY # TIOCSCTTY trying posix_openpt()... trying grantpt()... trying unlockpt()... trying ptsname_r()... trying to open /dev/pts/27... # === Checking if child gets pty as controlling terminal trying posix_openpt()... trying grantpt()... trying unlockpt()... trying ptsname_r()... trying to open /dev/pts/27... WARNING: when the client closes the slave pty, the master gets an error (undef return value and $! eq "Input/output error") instead of EOF (0 return value). Please be sure to handle this in your application (Expect already does). # Checking basic functionality and how your ptys handle large strings... # This test may hang on certain systems, even though it is protected # by alarm(). If the counter stops, try Ctrl-C, the test should continue. trying posix_openpt()... trying grantpt()... trying unlockpt()... trying ptsname_r()... trying to open /dev/pts/27... # isatty($master): YES # isatty($slave): YES # Child PID = 32048 # Good, your raw ptys can handle at least 530 bytes at once. sysread(): Input/output error at t/test.t line 151. Slave got EOF at line 530, byte 0. t/test.t ............. ok All tests successful. Files=2, Tests=6, 2 wallclock secs ( 0.01 usr 0.00 sys + 0.22 cusr 0.07 csys = 0.30 CPU) Result: PASS "/usr/bin/perl5.34.0" -MExtUtils::Command::MM -e 'cp_nonempty' -- Tty.bs blib/arch/auto/IO/Tty/Tty.bs 644 Manifying 3 pod documents Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /usr/src/slapt-src/perl/perl-IO-Tty/package-perl-IO-Tty/usr/lib/perl5/vendor_perl/auto/IO/Tty/Tty.so Installing /usr/src/slapt-src/perl/perl-IO-Tty/package-perl-IO-Tty/usr/lib/perl5/vendor_perl/IO/Pty.pm Installing /usr/src/slapt-src/perl/perl-IO-Tty/package-perl-IO-Tty/usr/lib/perl5/vendor_perl/IO/Tty.pm Installing /usr/src/slapt-src/perl/perl-IO-Tty/package-perl-IO-Tty/usr/lib/perl5/vendor_perl/IO/Tty/Constant.pm Installing /usr/src/slapt-src/perl/perl-IO-Tty/package-perl-IO-Tty/usr/man/man3/IO::Pty.3 Installing /usr/src/slapt-src/perl/perl-IO-Tty/package-perl-IO-Tty/usr/man/man3/IO::Tty.3 Installing /usr/src/slapt-src/perl/perl-IO-Tty/package-perl-IO-Tty/usr/man/man3/IO::Tty::Constant.3 Appending installation info to /usr/src/slapt-src/perl/perl-IO-Tty/package-perl-IO-Tty/usr/lib/perl5/perllocal.pod Slackware package maker, version 3.14159265. Searching for symbolic links: No symbolic links were found, so we won't make an installation script. You can make your own later in ./install/doinst.sh and rebuild the package if you like. This next step is optional - you can set the directories in your package to some sane permissions. If any of the directories in your package have special permissions, then DO NOT reset them here! Would you like to reset all directory permissions to 755 (drwxr-xr-x) and directory ownerships to root.root ([y]es, [n]o)? n Creating Slackware package: /usr/src/slapt-src/perl/perl-IO-Tty/perl-IO-Tty-1.14-i586-1salix15.0.txz ./ install/ install/slack-desc usr/ usr/doc/ usr/doc/perl-IO-Tty-1.14/ usr/doc/perl-IO-Tty-1.14/ChangeLog usr/doc/perl-IO-Tty-1.14/README.md usr/doc/perl-IO-Tty-1.14/perl-IO-Tty.SlackBuild usr/lib/ usr/lib/perl5/ usr/lib/perl5/vendor_perl/ usr/lib/perl5/vendor_perl/IO/ usr/lib/perl5/vendor_perl/IO/Pty.pm usr/lib/perl5/vendor_perl/IO/Tty/ usr/lib/perl5/vendor_perl/IO/Tty.pm usr/lib/perl5/vendor_perl/IO/Tty/Constant.pm usr/lib/perl5/vendor_perl/auto/ usr/lib/perl5/vendor_perl/auto/IO/ usr/lib/perl5/vendor_perl/auto/IO/Tty/ usr/lib/perl5/vendor_perl/auto/IO/Tty/Tty.so usr/man/ usr/man/man3/ usr/man/man3/IO::Pty.3.gz usr/man/man3/IO::Tty.3.gz usr/man/man3/IO::Tty::Constant.3.gz Slackware package /usr/src/slapt-src/perl/perl-IO-Tty/perl-IO-Tty-1.14-i586-1salix15.0.txz created. Installing package perl-IO-Tty-1.14-i586-1salix15.0... | perl-IO-Tty (Pseudo TTY object class) | | Perl extension that provides an interface to allow the creation of a | pseudo tty. | | | | | | | | |