The following packages will be installed: fsarchiver Fetching README... 0%100%100%100%100%100%Done Fetching fsarchiver.SlackBuild... 0%100%100%100%100%100%Done Fetching fsarchiver.info... 0%100%100%100%100%100%Done Fetching slack-desc... 0%100%100%100%100%100%Done fsarchiver-0.8.6/ fsarchiver-0.8.6/THANKS fsarchiver-0.8.6/doc/ fsarchiver-0.8.6/doc/Makefile.am fsarchiver-0.8.6/doc/Makefile.in fsarchiver-0.8.6/doc/fsarchiver.8 fsarchiver-0.8.6/missing fsarchiver-0.8.6/depcomp fsarchiver-0.8.6/install-sh fsarchiver-0.8.6/Makefile.am fsarchiver-0.8.6/README fsarchiver-0.8.6/config.sub fsarchiver-0.8.6/AUTHORS fsarchiver-0.8.6/src/ fsarchiver-0.8.6/src/thread_comp.h fsarchiver-0.8.6/src/archreader.h fsarchiver-0.8.6/src/fsarchiver.h fsarchiver-0.8.6/src/strlist.h fsarchiver-0.8.6/src/crypto.c fsarchiver-0.8.6/src/comp_bzip2.c fsarchiver-0.8.6/src/error.c fsarchiver-0.8.6/src/syncthread.h fsarchiver-0.8.6/src/datafile.h fsarchiver-0.8.6/src/devinfo.h fsarchiver-0.8.6/src/Makefile.am fsarchiver-0.8.6/src/options.h fsarchiver-0.8.6/src/oper_probe.h fsarchiver-0.8.6/src/dico.h fsarchiver-0.8.6/src/fs_reiserfs.c fsarchiver-0.8.6/src/options.c fsarchiver-0.8.6/src/archwriter.c fsarchiver-0.8.6/src/oper_restore.c fsarchiver-0.8.6/src/archinfo.c fsarchiver-0.8.6/src/datafile.c fsarchiver-0.8.6/src/fs_xfs.c fsarchiver-0.8.6/src/regmulti.h fsarchiver-0.8.6/src/comp_lz4.h fsarchiver-0.8.6/src/fs_ntfs.h fsarchiver-0.8.6/src/comp_lzma.c fsarchiver-0.8.6/src/comp_gzip.c fsarchiver-0.8.6/src/writebuf.c fsarchiver-0.8.6/src/comp_lz4.c fsarchiver-0.8.6/src/fs_reiserfs.h fsarchiver-0.8.6/src/comp_zstd.c fsarchiver-0.8.6/src/fs_vfat.h fsarchiver-0.8.6/src/filesys.h fsarchiver-0.8.6/src/logfile.c fsarchiver-0.8.6/src/writebuf.h fsarchiver-0.8.6/src/fs_reiser4.h fsarchiver-0.8.6/src/fs_btrfs.h fsarchiver-0.8.6/src/common.h fsarchiver-0.8.6/src/crypto.h fsarchiver-0.8.6/src/devinfo.c fsarchiver-0.8.6/src/Makefile.in fsarchiver-0.8.6/src/comp_zstd.h fsarchiver-0.8.6/src/archwriter.h fsarchiver-0.8.6/src/fs_xfs.h fsarchiver-0.8.6/src/archreader.c fsarchiver-0.8.6/src/fs_vfat.c fsarchiver-0.8.6/src/queue.h fsarchiver-0.8.6/src/dico.c fsarchiver-0.8.6/src/fs_btrfs.c fsarchiver-0.8.6/src/dichl.c fsarchiver-0.8.6/src/oper_save.h fsarchiver-0.8.6/src/strdico.c fsarchiver-0.8.6/src/fs_ext2.h fsarchiver-0.8.6/src/comp_lzo.h fsarchiver-0.8.6/src/archinfo.h fsarchiver-0.8.6/src/error.h fsarchiver-0.8.6/src/regmulti.c fsarchiver-0.8.6/src/strdico.h fsarchiver-0.8.6/src/fsarchiver.c fsarchiver-0.8.6/src/filesys.c fsarchiver-0.8.6/src/fs_jfs.c fsarchiver-0.8.6/src/logfile.h fsarchiver-0.8.6/src/syncthread.c fsarchiver-0.8.6/src/fs_ntfs.c fsarchiver-0.8.6/src/oper_restore.h fsarchiver-0.8.6/src/fs_ext2.c fsarchiver-0.8.6/src/thread_archio.h fsarchiver-0.8.6/src/thread_archio.c fsarchiver-0.8.6/src/dichl.h fsarchiver-0.8.6/src/types.h fsarchiver-0.8.6/src/comp_lzma.h fsarchiver-0.8.6/src/queue.c fsarchiver-0.8.6/src/thread_comp.c fsarchiver-0.8.6/src/oper_probe.c fsarchiver-0.8.6/src/common.c fsarchiver-0.8.6/src/comp_bzip2.h fsarchiver-0.8.6/src/fs_reiser4.c fsarchiver-0.8.6/src/fs_jfs.h fsarchiver-0.8.6/src/strlist.c fsarchiver-0.8.6/src/comp_lzo.c fsarchiver-0.8.6/src/comp_gzip.h fsarchiver-0.8.6/src/oper_save.c fsarchiver-0.8.6/NEWS fsarchiver-0.8.6/ChangeLog fsarchiver-0.8.6/autogen.sh fsarchiver-0.8.6/INSTALL fsarchiver-0.8.6/aclocal.m4 fsarchiver-0.8.6/Makefile.in fsarchiver-0.8.6/COPYING fsarchiver-0.8.6/config.guess fsarchiver-0.8.6/distrib/ fsarchiver-0.8.6/distrib/rpm/ fsarchiver-0.8.6/distrib/rpm/fsarchiver.spec fsarchiver-0.8.6/compile fsarchiver-0.8.6/internals/ fsarchiver-0.8.6/internals/FILEFORMAT fsarchiver-0.8.6/internals/MULTITHREADING fsarchiver-0.8.6/configure fsarchiver-0.8.6/configure.ac fsarchiver-0.8.6/config.h.in checking build system type... i586-slackware-linux-gnu checking host system type... i586-slackware-linux-gnu checking target system type... i586-slackware-linux-gnu checking for a BSD-compatible install... /usr/bin/ginstall -c checking whether build environment is sane... yes checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make supports the include directive... yes (GNU style) checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking whether gcc understands -c and -o together... yes checking dependency style of gcc... gcc3 checking for library containing strerror... none required checking for gcc... (cached) gcc checking whether the compiler supports GNU C... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to enable C11 features... (cached) none needed checking whether gcc understands -c and -o together... (cached) yes checking dependency style of gcc... (cached) gcc3 checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... 64 checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for pthread_create in -lpthread... yes configure: checking for libz (library and header files)... checking for compress in -lz... yes checking for zlib.h... yes configure: checking for libbz2 (library and header files) ... ... checking for BZ2_bzBuffToBuffCompress in -lbz2... yes checking for bzlib.h... yes checking for LZMA... yes configure: checking for liblzo2 (library and header files)... checking for lzo1x_1_compress in -llzo2... yes checking for lzo/lzo1x.h... yes configure: checking for lz4 (library and header files)... checking for LZ4_compress in -llz4... yes checking for lz4.h... yes configure: checking for zstd (library and header files)... checking for ZSTD_compress in -lzstd... yes checking for zstd.h... yes configure: checking for libgcrypt (library and header files)... checking for gcry_cipher_encrypt in -lgcrypt... yes checking for gcrypt.h... yes checking for EXT2FS... yes checking for COM_ERR... yes checking for E2P... yes checking for BLKID... yes checking for UUID... yes checking for sys/xattr.h... yes checking for malloc.h... yes checking for unistd.h... (cached) yes checking for pthread.h... yes checking for sys/param.h... yes checking for sys/statfs.h... yes checking for sys/mount.h... yes checking for stdint.h... (cached) yes checking for endian.h... yes checking for stdbool.h... yes checking for stdlib.h... (cached) yes checking for stdio.h... (cached) yes checking for getopt.h... yes checking for fcntl.h... yes checking for time.h... yes checking for wordexp.h... yes checking for execinfo.h... yes checking for fnmatch.h... yes checking for strerror... yes checking for open64... yes checking for lstat64... yes checking for stat64... yes checking for fstatfs64... yes checking for fstatvfs64... yes checking for mempcpy... yes checking for lutimes... yes checking for egrep... (cached) /usr/bin/grep -E checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating doc/Makefile config.status: creating config.h config.status: executing depfiles commands make all-recursive make[1]: Entering directory '/usr/src/slapt-src-i486/system/fsarchiver/fsarchiver-0.8.6' Making all in src make[2]: Entering directory '/usr/src/slapt-src-i486/system/fsarchiver/fsarchiver-0.8.6/src' CC fsarchiver-fsarchiver.o fsarchiver.c: In function ‘process_cmdline’: fsarchiver.c:400:68: warning: ‘snprintf’ output may be truncated before the last format character [-Wformat-truncation=] 400 | snprintf((char*)g_options.encryptpass, FSA_MAX_PASSLEN, "%s", passtmp); | ^ fsarchiver.c:400:9: note: ‘snprintf’ output between 7 and 65 bytes into a destination of size 64 400 | snprintf((char*)g_options.encryptpass, FSA_MAX_PASSLEN, "%s", passtmp); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ CC fsarchiver-oper_save.o CC fsarchiver-oper_restore.o oper_restore.c: In function ‘extractar_filesystem_extract’: oper_restore.c:1250:51: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 128 [-Wformat-truncation=] 1250 | snprintf(filesystem, sizeof(filesystem), "%s", tempbuf); | ^~ ~~~~~~~ oper_restore.c:1250:9: note: ‘snprintf’ output between 1 and 1024 bytes into a destination of size 128 1250 | snprintf(filesystem, sizeof(filesystem), "%s", tempbuf); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ CC fsarchiver-oper_probe.o CC fsarchiver-thread_archio.o CC fsarchiver-archreader.o CC fsarchiver-archwriter.o CC fsarchiver-writebuf.o CC fsarchiver-archinfo.o CC fsarchiver-thread_comp.o CC fsarchiver-comp_gzip.o CC fsarchiver-comp_bzip2.o CC fsarchiver-comp_lzma.o CC fsarchiver-comp_lzo.o CC fsarchiver-comp_lz4.o CC fsarchiver-comp_zstd.o CC fsarchiver-crypto.o CC fsarchiver-fs_ntfs.o CC fsarchiver-fs_ext2.o fs_ext2.c: In function ‘extfs_getinfo’: fs_ext2.c:454:52: warning: argument to ‘sizeof’ in ‘strncpy’ call is the same expression as the source; did you mean to use the size of the destination? [-Wsizeof-pointer-memaccess] 454 | strncpy(label, super->s_volume_name, sizeof(super->s_volume_name)); | ^ fs_ext2.c: In function ‘extfs_mkfs’: fs_ext2.c:226:39: warning: ‘%s’ directive output may be truncated writing up to 2047 bytes into a region of size 64 [-Wformat-truncation=] 226 | snprintf(uuid, sizeof(uuid), "%s", buffer); | ^~ ~~~~~~ fs_ext2.c:226:9: note: ‘snprintf’ output between 1 and 2048 bytes into a destination of size 64 226 | snprintf(uuid, sizeof(uuid), "%s", buffer); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ CC fsarchiver-fs_reiserfs.o CC fsarchiver-fs_reiser4.o CC fsarchiver-fs_btrfs.o CC fsarchiver-fs_xfs.o fs_xfs.c: In function ‘xfs_mkfs’: fs_xfs.c:226:39: warning: ‘%s’ directive output may be truncated writing up to 2047 bytes into a region of size 64 [-Wformat-truncation=] 226 | snprintf(uuid, sizeof(uuid), "%s", buffer); | ^~ ~~~~~~ fs_xfs.c:226:9: note: ‘snprintf’ output between 1 and 2048 bytes into a destination of size 64 226 | snprintf(uuid, sizeof(uuid), "%s", buffer); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ CC fsarchiver-fs_jfs.o CC fsarchiver-fs_vfat.o CC fsarchiver-common.o CC fsarchiver-dico.o CC fsarchiver-strdico.o CC fsarchiver-dichl.o CC fsarchiver-queue.o CC fsarchiver-error.o CC fsarchiver-syncthread.o CC fsarchiver-datafile.o CC fsarchiver-strlist.o CC fsarchiver-regmulti.o CC fsarchiver-options.o CC fsarchiver-logfile.o CC fsarchiver-filesys.o CC fsarchiver-devinfo.o devinfo.c: In function ‘get_devinfo’: devinfo.c:83:71: warning: ‘%s’ directive output may be truncated writing up to 4095 bytes into a region of size 256 [-Wformat-truncation=] 83 | snprintf(outdev->longname, sizeof(outdev->longname), "%s", temp); | ^~ ~~~~ devinfo.c:83:17: note: ‘snprintf’ output between 1 and 4096 bytes into a destination of size 256 83 | snprintf(outdev->longname, sizeof(outdev->longname), "%s", temp); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ CCLD fsarchiver make[2]: Leaving directory '/usr/src/slapt-src-i486/system/fsarchiver/fsarchiver-0.8.6/src' Making all in doc make[2]: Entering directory '/usr/src/slapt-src-i486/system/fsarchiver/fsarchiver-0.8.6/doc' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/usr/src/slapt-src-i486/system/fsarchiver/fsarchiver-0.8.6/doc' make[2]: Entering directory '/usr/src/slapt-src-i486/system/fsarchiver/fsarchiver-0.8.6' make[2]: Leaving directory '/usr/src/slapt-src-i486/system/fsarchiver/fsarchiver-0.8.6' make[1]: Leaving directory '/usr/src/slapt-src-i486/system/fsarchiver/fsarchiver-0.8.6' Making install in src make[1]: Entering directory '/usr/src/slapt-src-i486/system/fsarchiver/fsarchiver-0.8.6/src' make[2]: Entering directory '/usr/src/slapt-src-i486/system/fsarchiver/fsarchiver-0.8.6/src' /usr/bin/mkdir -p '/usr/src/slapt-src-i486/system/fsarchiver/package-fsarchiver/usr/sbin' /usr/bin/ginstall -c fsarchiver '/usr/src/slapt-src-i486/system/fsarchiver/package-fsarchiver/usr/sbin' make[2]: Nothing to be done for 'install-data-am'. make[2]: Leaving directory '/usr/src/slapt-src-i486/system/fsarchiver/fsarchiver-0.8.6/src' make[1]: Leaving directory '/usr/src/slapt-src-i486/system/fsarchiver/fsarchiver-0.8.6/src' Making install in doc make[1]: Entering directory '/usr/src/slapt-src-i486/system/fsarchiver/fsarchiver-0.8.6/doc' make[2]: Entering directory '/usr/src/slapt-src-i486/system/fsarchiver/fsarchiver-0.8.6/doc' make[2]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/usr/src/slapt-src-i486/system/fsarchiver/package-fsarchiver/usr/man/man8' /usr/bin/ginstall -c -m 644 fsarchiver.8 '/usr/src/slapt-src-i486/system/fsarchiver/package-fsarchiver/usr/man/man8' make[2]: Leaving directory '/usr/src/slapt-src-i486/system/fsarchiver/fsarchiver-0.8.6/doc' make[1]: Leaving directory '/usr/src/slapt-src-i486/system/fsarchiver/fsarchiver-0.8.6/doc' make[1]: Entering directory '/usr/src/slapt-src-i486/system/fsarchiver/fsarchiver-0.8.6' make[2]: Entering directory '/usr/src/slapt-src-i486/system/fsarchiver/fsarchiver-0.8.6' make[2]: Nothing to be done for 'install-exec-am'. make[2]: Nothing to be done for 'install-data-am'. make[2]: Leaving directory '/usr/src/slapt-src-i486/system/fsarchiver/fsarchiver-0.8.6' make[1]: Leaving directory '/usr/src/slapt-src-i486/system/fsarchiver/fsarchiver-0.8.6' Slackware package maker, version 3.14159265. Searching for symbolic links: No symbolic links were found, so we won't make an installation script. You can make your own later in ./install/doinst.sh and rebuild the package if you like. This next step is optional - you can set the directories in your package to some sane permissions. If any of the directories in your package have special permissions, then DO NOT reset them here! Would you like to reset all directory permissions to 755 (drwxr-xr-x) and directory ownerships to root.root ([y]es, [n]o)? n Creating Slackware package: /usr/src/slapt-src-i486/system/fsarchiver/fsarchiver-0.8.6-i586-1salix15.0.txz ./ install/ install/slack-desc usr/ usr/doc/ usr/doc/fsarchiver-0.8.6/ usr/doc/fsarchiver-0.8.6/COPYING usr/doc/fsarchiver-0.8.6/ChangeLog usr/doc/fsarchiver-0.8.6/README usr/doc/fsarchiver-0.8.6/fsarchiver.SlackBuild usr/man/ usr/man/man8/ usr/man/man8/fsarchiver.8.gz usr/sbin/ usr/sbin/fsarchiver Slackware package /usr/src/slapt-src-i486/system/fsarchiver/fsarchiver-0.8.6-i586-1salix15.0.txz created. Installing package fsarchiver-0.8.6-i586-1salix15.0... | fsarchiver (Filesystem Archiver for Linux) | | FSArchiver is a system tool that allows you to save the | contents of a file-system to a compressed archive file. The | file system can also be restored on a different-sized partition | and also to a different filesystem. It can also create the | filesytems while restoring. | | More info on http://www.fsarchiver.org/ | | | |