The following packages will be installed: streamripper Fetching README... 0%100%100%100%100%100%Done Fetching slack-desc... 0%100%100%100%100%100%Done Fetching streamripper.SlackBuild... 0%100%100%100%100%100%Done Fetching streamripper.info... 0%100%100%100%100%100%Done streamripper-1.64.6/ streamripper-1.64.6/Makefile.in streamripper-1.64.6/config.guess streamripper-1.64.6/console/ streamripper-1.64.6/console/streamripper.c streamripper-1.64.6/console/cstreamripper.c streamripper-1.64.6/install-sh streamripper-1.64.6/COPYING streamripper-1.64.6/config.sub streamripper-1.64.6/README streamripper-1.64.6/ltconfig streamripper-1.64.6/missing streamripper-1.64.6/libmad-0.15.1b/ streamripper-1.64.6/libmad-0.15.1b/rq_table.dat streamripper-1.64.6/libmad-0.15.1b/config.h.in streamripper-1.64.6/libmad-0.15.1b/version.h streamripper-1.64.6/libmad-0.15.1b/frame.c streamripper-1.64.6/libmad-0.15.1b/VERSION streamripper-1.64.6/libmad-0.15.1b/layer12.h streamripper-1.64.6/libmad-0.15.1b/Makefile.in streamripper-1.64.6/libmad-0.15.1b/CREDITS streamripper-1.64.6/libmad-0.15.1b/fixed.c streamripper-1.64.6/libmad-0.15.1b/synth.h streamripper-1.64.6/libmad-0.15.1b/config.guess streamripper-1.64.6/libmad-0.15.1b/decoder.c streamripper-1.64.6/libmad-0.15.1b/libmad.list.in streamripper-1.64.6/libmad-0.15.1b/mad.h.sed streamripper-1.64.6/libmad-0.15.1b/install-sh streamripper-1.64.6/libmad-0.15.1b/imdct_s.dat streamripper-1.64.6/libmad-0.15.1b/TODO streamripper-1.64.6/libmad-0.15.1b/sf_table.dat streamripper-1.64.6/libmad-0.15.1b/synth.c streamripper-1.64.6/libmad-0.15.1b/layer3.h streamripper-1.64.6/libmad-0.15.1b/COPYING streamripper-1.64.6/libmad-0.15.1b/qc_table.dat streamripper-1.64.6/libmad-0.15.1b/config.sub streamripper-1.64.6/libmad-0.15.1b/version.c streamripper-1.64.6/libmad-0.15.1b/README streamripper-1.64.6/libmad-0.15.1b/stream.h streamripper-1.64.6/libmad-0.15.1b/bit.c streamripper-1.64.6/libmad-0.15.1b/imdct_l_arm.S streamripper-1.64.6/libmad-0.15.1b/missing streamripper-1.64.6/libmad-0.15.1b/timer.h streamripper-1.64.6/libmad-0.15.1b/frame.h streamripper-1.64.6/libmad-0.15.1b/huffman.h streamripper-1.64.6/libmad-0.15.1b/huffman.c streamripper-1.64.6/libmad-0.15.1b/fixed.h streamripper-1.64.6/libmad-0.15.1b/Makefile.am streamripper-1.64.6/libmad-0.15.1b/ltmain.sh streamripper-1.64.6/libmad-0.15.1b/D.dat streamripper-1.64.6/libmad-0.15.1b/global.h streamripper-1.64.6/libmad-0.15.1b/mkinstalldirs streamripper-1.64.6/libmad-0.15.1b/CHANGES streamripper-1.64.6/libmad-0.15.1b/bit.h streamripper-1.64.6/libmad-0.15.1b/configure.ac streamripper-1.64.6/libmad-0.15.1b/INSTALL streamripper-1.64.6/libmad-0.15.1b/mad.h streamripper-1.64.6/libmad-0.15.1b/decoder.h streamripper-1.64.6/libmad-0.15.1b/COPYRIGHT streamripper-1.64.6/libmad-0.15.1b/configure streamripper-1.64.6/libmad-0.15.1b/layer3.c streamripper-1.64.6/libmad-0.15.1b/stream.c streamripper-1.64.6/libmad-0.15.1b/timer.c streamripper-1.64.6/libmad-0.15.1b/aclocal.m4 streamripper-1.64.6/libmad-0.15.1b/layer12.c streamripper-1.64.6/libmad-0.15.1b/minimad.c streamripper-1.64.6/libmad-0.15.1b/depcomp streamripper-1.64.6/m4/ streamripper-1.64.6/m4/iconv.m4 streamripper-1.64.6/m4/type_socklen_t.m4 streamripper-1.64.6/m4/lib-ld.m4 streamripper-1.64.6/m4/codeset.m4 streamripper-1.64.6/m4/ogg.m4 streamripper-1.64.6/m4/glib-2.0.m4 streamripper-1.64.6/m4/pkg.m4 streamripper-1.64.6/m4/lib-link.m4 streamripper-1.64.6/m4/vorbis.m4 streamripper-1.64.6/m4/lib-prefix.m4 streamripper-1.64.6/m4/cf_curses.m4 streamripper-1.64.6/m4/sr_locale_charset.m4 streamripper-1.64.6/config.rpath streamripper-1.64.6/parse_rules.txt streamripper-1.64.6/THANKS streamripper-1.64.6/Makefile.am streamripper-1.64.6/streamripper.1 streamripper-1.64.6/ltmain.sh streamripper-1.64.6/CHANGES streamripper-1.64.6/configure.ac streamripper-1.64.6/INSTALL streamripper-1.64.6/lib/ streamripper-1.64.6/lib/errors.c streamripper-1.64.6/lib/config.h.in streamripper-1.64.6/lib/list.h streamripper-1.64.6/lib/Makefile.in streamripper-1.64.6/lib/charset.c streamripper-1.64.6/lib/ripogg.c streamripper-1.64.6/lib/config.h streamripper-1.64.6/lib/rip_manager.c streamripper-1.64.6/lib/http.h streamripper-1.64.6/lib/debug.c streamripper-1.64.6/lib/threadlib.c streamripper-1.64.6/lib/http.c streamripper-1.64.6/lib/parse.c streamripper-1.64.6/lib/rip_manager.h streamripper-1.64.6/lib/debug.h streamripper-1.64.6/lib/prefs.c streamripper-1.64.6/lib/errors.h streamripper-1.64.6/lib/ictest.c streamripper-1.64.6/lib/compat.h streamripper-1.64.6/lib/relaylib.h streamripper-1.64.6/lib/mchar.h streamripper-1.64.6/lib/argv.c streamripper-1.64.6/lib/filelib.h streamripper-1.64.6/lib/filelib.c streamripper-1.64.6/lib/utf8.h streamripper-1.64.6/lib/findsep.h streamripper-1.64.6/lib/ripstream.c streamripper-1.64.6/lib/cbuf2.c streamripper-1.64.6/lib/external.h streamripper-1.64.6/lib/cbuf2.h streamripper-1.64.6/lib/utf8.c streamripper-1.64.6/lib/parse.h streamripper-1.64.6/lib/iconvert.c streamripper-1.64.6/lib/ripstream.h streamripper-1.64.6/lib/Makefile.am streamripper-1.64.6/lib/confw32.h streamripper-1.64.6/lib/srtypes.h streamripper-1.64.6/lib/prefs.h streamripper-1.64.6/lib/ripogg.h streamripper-1.64.6/lib/mchar.c streamripper-1.64.6/lib/socklib.h streamripper-1.64.6/lib/socklib.c streamripper-1.64.6/lib/charmaps.h streamripper-1.64.6/lib/ripaac.c streamripper-1.64.6/lib/external.c streamripper-1.64.6/lib/srconfig.h streamripper-1.64.6/lib/charset.h streamripper-1.64.6/lib/findsep2.c streamripper-1.64.6/lib/relaylib.c streamripper-1.64.6/lib/findsep.c streamripper-1.64.6/lib/uce_dirent.h streamripper-1.64.6/lib/threadlib.h streamripper-1.64.6/fake_external_metadata.pl streamripper-1.64.6/configure streamripper-1.64.6/aclocal.m4 streamripper-1.64.6/depcomp streamripper-1.64.6/fetch_external_metadata.pl checking for a BSD-compatible install... /usr/bin/ginstall -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking for a BSD-compatible install... /usr/bin/ginstall -c checking for ranlib... ranlib checking for inline... inline checking for main in -lm... yes checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for working alloca.h... yes checking for alloca... yes checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.7... yes checking for GLIB - version >= 2.16.0... yes (version 2.70.3) checking for mad_stream_buffer in -lmad... yes checking for pthread_create in -lpthread... yes checking for socklen_t... yes checking for dirent.h that defines DIR... yes checking for library containing opendir... none required checking for ANSI C header files... (cached) yes checking for unistd.h... (cached) yes checking wchar.h usability... yes checking wchar.h presence... yes checking for wchar.h... yes checking wctype.h usability... yes checking wctype.h presence... yes checking for wctype.h... yes checking for wchar_t... yes checking for iswcntrl... yes checking for vswprintf... yes checking whether mbrtowc and mbstate_t are properly declared... yes checking build system type... x86_64-slackware-linux-gnu checking host system type... x86_64-slackware-linux-gnu checking for ld used by GCC... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for shared library run path origin... done checking for iconv... yes checking for iconv declaration... extern size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft); checking for nl_langinfo and CODESET... yes checking for buildargv in -liberty... yes checking for NeAACDecDecode2 in -lfaad... yes checking for initscr in -lncurses ... yes configure: Request for ncurses checking for Ogg... yes checking for Vorbis... yes checking for sem_init... no checking for sem_init in -lsem... no checking for sem_init... (cached) no checking for sem_init in -lrt... no checking for stdint.h... (cached) yes checking for inttypes.h... (cached) yes checking for uint32_t... yes checking for u_int32_t... yes checking sys/sockio.h usability... no checking sys/sockio.h presence... no checking for sys/sockio.h... no checking for connect... yes checking for size_t... yes checking return type of signal handlers... void checking for vprintf... yes checking for _doprnt... no checking for mkdir... yes checking for socket... yes checking for strerror... yes checking for strstr... yes configure: creating ./config.status config.status: creating lib/Makefile config.status: creating Makefile config.status: creating lib/config.h config.status: executing depfiles commands * Streamripper configuration Using included MAD library? no Ogg/vorbis support? yes Making all in lib make[1]: Entering directory '/usr/src/slapt-src/audio/streamripper/streamripper-1.64.6/lib' make all-am make[2]: Entering directory '/usr/src/slapt-src/audio/streamripper/streamripper-1.64.6/lib' gcc -DHAVE_CONFIG_H -I. -I/usr/include -I/usr/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/src/slapt-src/audio/streamripper/streamripper-1.64.6/lib -D__UNIX__ -O2 -fPIC -Wall -MT cbuf2.o -MD -MP -MF .deps/cbuf2.Tpo -c -o cbuf2.o cbuf2.c In file included from srtypes.h:25, from errors.h:4, from cbuf2.c:43: cbuf2.c: In function ‘cbuf2_advance_metadata_list’: list.h:211:32: warning: right-hand operand of comma expression has no effect [-Wunused-value] 211 | for (pos = (head)->prev, prefetch(pos->prev); pos != (head); \ | ^ cbuf2.c:140:5: note: in expansion of macro ‘list_for_each_prev’ 140 | list_for_each_prev (p, &(cbuf2->metadata_list)) { | ^~~~~~~~~~~~~~~~~~ list.h:212:32: warning: right-hand operand of comma expression has no effect [-Wunused-value] 212 | pos = pos->prev, prefetch(pos->prev)) | ^ cbuf2.c:140:5: note: in expansion of macro ‘list_for_each_prev’ 140 | list_for_each_prev (p, &(cbuf2->metadata_list)) { | ^~~~~~~~~~~~~~~~~~ cbuf2.c: In function ‘cbuf2_insert_chunk’: list.h:203:32: warning: right-hand operand of comma expression has no effect [-Wunused-value] 203 | for (pos = (head)->next, prefetch(pos->next); pos != (head); \ | ^ cbuf2.c:378:9: note: in expansion of macro ‘list_for_each’ 378 | list_for_each (p, &this_page_list) { | ^~~~~~~~~~~~~ list.h:204:32: warning: right-hand operand of comma expression has no effect [-Wunused-value] 204 | pos = pos->next, prefetch(pos->next)) | ^ cbuf2.c:378:9: note: in expansion of macro ‘list_for_each’ 378 | list_for_each (p, &this_page_list) { | ^~~~~~~~~~~~~ cbuf2.c: In function ‘cbuf2_extract_relay_mp3’: list.h:203:32: warning: right-hand operand of comma expression has no effect [-Wunused-value] 203 | for (pos = (head)->next, prefetch(pos->next); pos != (head); \ | ^ cbuf2.c:521:9: note: in expansion of macro ‘list_for_each’ 521 | list_for_each (p, &(cbuf2->metadata_list)) { | ^~~~~~~~~~~~~ list.h:204:32: warning: right-hand operand of comma expression has no effect [-Wunused-value] 204 | pos = pos->next, prefetch(pos->next)) | ^ cbuf2.c:521:9: note: in expansion of macro ‘list_for_each’ 521 | list_for_each (p, &(cbuf2->metadata_list)) { | ^~~~~~~~~~~~~ cbuf2.c: In function ‘cbuf2_debug_lists’: list.h:203:32: warning: right-hand operand of comma expression has no effect [-Wunused-value] 203 | for (pos = (head)->next, prefetch(pos->next); pos != (head); \ | ^ cbuf2.c:555:9: note: in expansion of macro ‘list_for_each’ 555 | list_for_each (p, &(cbuf2->metadata_list)) { | ^~~~~~~~~~~~~ list.h:204:32: warning: right-hand operand of comma expression has no effect [-Wunused-value] 204 | pos = pos->next, prefetch(pos->next)) | ^ cbuf2.c:555:9: note: in expansion of macro ‘list_for_each’ 555 | list_for_each (p, &(cbuf2->metadata_list)) { | ^~~~~~~~~~~~~ list.h:203:32: warning: right-hand operand of comma expression has no effect [-Wunused-value] 203 | for (pos = (head)->next, prefetch(pos->next); pos != (head); \ | ^ cbuf2.c:572:9: note: in expansion of macro ‘list_for_each’ 572 | list_for_each (p, &(cbuf2->ogg_page_list)) { | ^~~~~~~~~~~~~ list.h:204:32: warning: right-hand operand of comma expression has no effect [-Wunused-value] 204 | pos = pos->next, prefetch(pos->next)) | ^ cbuf2.c:572:9: note: in expansion of macro ‘list_for_each’ 572 | list_for_each (p, &(cbuf2->ogg_page_list)) { | ^~~~~~~~~~~~~ cbuf2.c: In function ‘cbuf2_init_relay_entry’: list.h:203:32: warning: right-hand operand of comma expression has no effect [-Wunused-value] 203 | for (pos = (head)->next, prefetch(pos->next); pos != (head); \ | ^ cbuf2.c:782:9: note: in expansion of macro ‘list_for_each’ 782 | list_for_each (p, &(cbuf2->ogg_page_list)) { | ^~~~~~~~~~~~~ list.h:204:32: warning: right-hand operand of comma expression has no effect [-Wunused-value] 204 | pos = pos->next, prefetch(pos->next)) | ^ cbuf2.c:782:9: note: in expansion of macro ‘list_for_each’ 782 | list_for_each (p, &(cbuf2->ogg_page_list)) { | ^~~~~~~~~~~~~ mv -f .deps/cbuf2.Tpo .deps/cbuf2.Po gcc -DHAVE_CONFIG_H -I. -I/usr/include -I/usr/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/src/slapt-src/audio/streamripper/streamripper-1.64.6/lib -D__UNIX__ -O2 -fPIC -Wall -MT charset.o -MD -MP -MF .deps/charset.Tpo -c -o charset.o charset.c mv -f .deps/charset.Tpo .deps/charset.Po gcc -DHAVE_CONFIG_H -I. -I/usr/include -I/usr/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/src/slapt-src/audio/streamripper/streamripper-1.64.6/lib -D__UNIX__ -O2 -fPIC -Wall -MT debug.o -MD -MP -MF .deps/debug.Tpo -c -o debug.o debug.c mv -f .deps/debug.Tpo .deps/debug.Po gcc -DHAVE_CONFIG_H -I. -I/usr/include -I/usr/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/src/slapt-src/audio/streamripper/streamripper-1.64.6/lib -D__UNIX__ -O2 -fPIC -Wall -MT errors.o -MD -MP -MF .deps/errors.Tpo -c -o errors.o errors.c mv -f .deps/errors.Tpo .deps/errors.Po gcc -DHAVE_CONFIG_H -I. -I/usr/include -I/usr/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/src/slapt-src/audio/streamripper/streamripper-1.64.6/lib -D__UNIX__ -O2 -fPIC -Wall -MT external.o -MD -MP -MF .deps/external.Tpo -c -o external.o external.c mv -f .deps/external.Tpo .deps/external.Po gcc -DHAVE_CONFIG_H -I. -I/usr/include -I/usr/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/src/slapt-src/audio/streamripper/streamripper-1.64.6/lib -D__UNIX__ -O2 -fPIC -Wall -MT filelib.o -MD -MP -MF .deps/filelib.Tpo -c -o filelib.o filelib.c filelib.c: In function ‘parse_and_subst_pat’: filelib.c:805:9: warning: variable ‘done’ set but not used [-Wunused-but-set-variable] 805 | int done; | ^~~~ filelib.c: In function ‘get_next_sequence_number’: filelib.c:1338:9: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable] 1338 | int rc; | ^~ mv -f .deps/filelib.Tpo .deps/filelib.Po gcc -DHAVE_CONFIG_H -I. -I/usr/include -I/usr/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/src/slapt-src/audio/streamripper/streamripper-1.64.6/lib -D__UNIX__ -O2 -fPIC -Wall -MT findsep.o -MD -MP -MF .deps/findsep.Tpo -c -o findsep.o findsep.c findsep.c: In function ‘findsep_silence’: findsep.c:133:9: warning: variable ‘result’ set but not used [-Wunused-but-set-variable] 133 | int result; | ^~~~~~ In file included from srtypes.h:25, from findsep.h:21, from findsep.c:30: findsep.c: In function ‘apply_padding’: list.h:240:58: warning: right-hand operand of comma expression has no effect [-Wunused-value] 240 | for (pos = list_entry((head)->next, type, member), \ | ^ findsep.c:251:5: note: in expansion of macro ‘list_for_each_entry’ 251 | list_for_each_entry (pos, FRAME_LIST, &(ds->frame_list), m_list) { | ^~~~~~~~~~~~~~~~~~~ list.h:243:62: warning: right-hand operand of comma expression has no effect [-Wunused-value] 243 | pos = list_entry(pos->member.next, type, member), \ | ^ findsep.c:251:5: note: in expansion of macro ‘list_for_each_entry’ 251 | list_for_each_entry (pos, FRAME_LIST, &(ds->frame_list), m_list) { | ^~~~~~~~~~~~~~~~~~~ findsep.c: In function ‘find_bitrate’: findsep.c:488:9: warning: variable ‘result’ set but not used [-Wunused-but-set-variable] 488 | int result; | ^~~~~~ mv -f .deps/findsep.Tpo .deps/findsep.Po gcc -DHAVE_CONFIG_H -I. -I/usr/include -I/usr/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/src/slapt-src/audio/streamripper/streamripper-1.64.6/lib -D__UNIX__ -O2 -fPIC -Wall -MT findsep2.o -MD -MP -MF .deps/findsep2.Tpo -c -o findsep2.o findsep2.c findsep2.c: In function ‘findsep_silence_2’: findsep2.c:130:9: warning: variable ‘result’ set but not used [-Wunused-but-set-variable] 130 | int result; | ^~~~~~ In file included from srtypes.h:25, from findsep.h:21, from findsep2.c:30: findsep2.c: In function ‘apply_padding’: list.h:240:58: warning: right-hand operand of comma expression has no effect [-Wunused-value] 240 | for (pos = list_entry((head)->next, type, member), \ | ^ findsep2.c:250:5: note: in expansion of macro ‘list_for_each_entry’ 250 | list_for_each_entry (pos, FRAME_LIST, &(ds->frame_list), m_list) { | ^~~~~~~~~~~~~~~~~~~ list.h:243:62: warning: right-hand operand of comma expression has no effect [-Wunused-value] 243 | pos = list_entry(pos->member.next, type, member), \ | ^ findsep2.c:250:5: note: in expansion of macro ‘list_for_each_entry’ 250 | list_for_each_entry (pos, FRAME_LIST, &(ds->frame_list), m_list) { | ^~~~~~~~~~~~~~~~~~~ mv -f .deps/findsep2.Tpo .deps/findsep2.Po gcc -DHAVE_CONFIG_H -I. -I/usr/include -I/usr/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/src/slapt-src/audio/streamripper/streamripper-1.64.6/lib -D__UNIX__ -O2 -fPIC -Wall -MT http.o -MD -MP -MF .deps/http.Tpo -c -o http.o http.c mv -f .deps/http.Tpo .deps/http.Po gcc -DHAVE_CONFIG_H -I. -I/usr/include -I/usr/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/src/slapt-src/audio/streamripper/streamripper-1.64.6/lib -D__UNIX__ -O2 -fPIC -Wall -MT iconvert.o -MD -MP -MF .deps/iconvert.Tpo -c -o iconvert.o iconvert.c mv -f .deps/iconvert.Tpo .deps/iconvert.Po gcc -DHAVE_CONFIG_H -I. -I/usr/include -I/usr/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/src/slapt-src/audio/streamripper/streamripper-1.64.6/lib -D__UNIX__ -O2 -fPIC -Wall -MT mchar.o -MD -MP -MF .deps/mchar.Tpo -c -o mchar.o mchar.c mchar.c: In function ‘set_codesets_default’: mchar.c:575:9: warning: ‘strncpy’ specified bound 128 equals destination size [-Wstringop-truncation] 575 | strncpy (cs_opt->codeset_locale, fromcode, MAX_CODESET_STRING); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ mchar.c:576:9: warning: ‘strncpy’ specified bound 128 equals destination size [-Wstringop-truncation] 576 | strncpy (cs_opt->codeset_filesys, fromcode, MAX_CODESET_STRING); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ mchar.c:577:9: warning: ‘strncpy’ specified bound 128 equals destination size [-Wstringop-truncation] 577 | strncpy (cs_opt->codeset_metadata, fromcode, MAX_CODESET_STRING); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ mchar.c:578:9: warning: ‘strncpy’ specified bound 128 equals destination size [-Wstringop-truncation] 578 | strncpy (cs_opt->codeset_relay, fromcode, MAX_CODESET_STRING); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ mv -f .deps/mchar.Tpo .deps/mchar.Po gcc -DHAVE_CONFIG_H -I. -I/usr/include -I/usr/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/src/slapt-src/audio/streamripper/streamripper-1.64.6/lib -D__UNIX__ -O2 -fPIC -Wall -MT parse.o -MD -MP -MF .deps/parse.Tpo -c -o parse.o parse.c parse.c: In function ‘parse_metadata’: parse.c:451:9: warning: variable ‘eflags’ set but not used [-Wunused-but-set-variable] 451 | int eflags; | ^~~~~~ mv -f .deps/parse.Tpo .deps/parse.Po gcc -DHAVE_CONFIG_H -I. -I/usr/include -I/usr/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/src/slapt-src/audio/streamripper/streamripper-1.64.6/lib -D__UNIX__ -O2 -fPIC -Wall -MT prefs.o -MD -MP -MF .deps/prefs.Tpo -c -o prefs.o prefs.c prefs.c: In function ‘prefs_load’: prefs.c:184:22: warning: ‘padding’ may be used uninitialized in this function [-Wmaybe-uninitialized] 184 | if (!rc1 || padding == 300) { | ~~~~~^~~~~~~~~~~~~~~~~ mv -f .deps/prefs.Tpo .deps/prefs.Po gcc -DHAVE_CONFIG_H -I. -I/usr/include -I/usr/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/src/slapt-src/audio/streamripper/streamripper-1.64.6/lib -D__UNIX__ -O2 -fPIC -Wall -MT relaylib.o -MD -MP -MF .deps/relaylib.Tpo -c -o relaylib.o relaylib.c relaylib.c: In function ‘thread_send’: relaylib.c:670:16: warning: variable ‘err’ set but not used [-Wunused-but-set-variable] 670 | error_code err = SR_SUCCESS; | ^~~ mv -f .deps/relaylib.Tpo .deps/relaylib.Po gcc -DHAVE_CONFIG_H -I. -I/usr/include -I/usr/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/src/slapt-src/audio/streamripper/streamripper-1.64.6/lib -D__UNIX__ -O2 -fPIC -Wall -MT rip_manager.o -MD -MP -MF .deps/rip_manager.Tpo -c -o rip_manager.o rip_manager.c mv -f .deps/rip_manager.Tpo .deps/rip_manager.Po gcc -DHAVE_CONFIG_H -I. -I/usr/include -I/usr/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/src/slapt-src/audio/streamripper/streamripper-1.64.6/lib -D__UNIX__ -O2 -fPIC -Wall -MT ripaac.o -MD -MP -MF .deps/ripaac.Tpo -c -o ripaac.o ripaac.c mv -f .deps/ripaac.Tpo .deps/ripaac.Po gcc -DHAVE_CONFIG_H -I. -I/usr/include -I/usr/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/src/slapt-src/audio/streamripper/streamripper-1.64.6/lib -D__UNIX__ -O2 -fPIC -Wall -MT ripogg.o -MD -MP -MF .deps/ripogg.Tpo -c -o ripogg.o ripogg.c mv -f .deps/ripogg.Tpo .deps/ripogg.Po gcc -DHAVE_CONFIG_H -I. -I/usr/include -I/usr/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/src/slapt-src/audio/streamripper/streamripper-1.64.6/lib -D__UNIX__ -O2 -fPIC -Wall -MT ripstream.o -MD -MP -MF .deps/ripstream.Tpo -c -o ripstream.o ripstream.c ripstream.c: In function ‘ripstream_rip_ogg’: ripstream.c:228:12: warning: variable ‘extract_size’ set but not used [-Wunused-but-set-variable] 228 | u_long extract_size; | ^~~~~~~~~~~~ ripstream.c: In function ‘end_track_mp3’: ripstream.c:676:9: warning: ‘strncpy’ output truncated before terminating nul copying 3 bytes from a string of the same length [-Wstringop-truncation] 676 | strncpy (id3v1.tag, "TAG", strlen("TAG")); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ripstream.c: In function ‘write_id3v2_frame.isra’: ripstream.c:723:5: warning: ‘strncpy’ specified bound 4 equals destination size [-Wstringop-truncation] 723 | strncpy(id3v2frame.id, tag_name, 4); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ mv -f .deps/ripstream.Tpo .deps/ripstream.Po gcc -DHAVE_CONFIG_H -I. -I/usr/include -I/usr/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/src/slapt-src/audio/streamripper/streamripper-1.64.6/lib -D__UNIX__ -O2 -fPIC -Wall -MT socklib.o -MD -MP -MF .deps/socklib.Tpo -c -o socklib.o socklib.c mv -f .deps/socklib.Tpo .deps/socklib.Po gcc -DHAVE_CONFIG_H -I. -I/usr/include -I/usr/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/src/slapt-src/audio/streamripper/streamripper-1.64.6/lib -D__UNIX__ -O2 -fPIC -Wall -MT threadlib.o -MD -MP -MF .deps/threadlib.Tpo -c -o threadlib.o threadlib.c mv -f .deps/threadlib.Tpo .deps/threadlib.Po gcc -DHAVE_CONFIG_H -I. -I/usr/include -I/usr/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/src/slapt-src/audio/streamripper/streamripper-1.64.6/lib -D__UNIX__ -O2 -fPIC -Wall -MT utf8.o -MD -MP -MF .deps/utf8.Tpo -c -o utf8.o utf8.c utf8.c: In function ‘utf8_decode’: utf8.c:310:11: warning: unused variable ‘charset’ [-Wunused-variable] 310 | char *charset; | ^~~~~~~ mv -f .deps/utf8.Tpo .deps/utf8.Po rm -f libstreamripper.a ar cru libstreamripper.a cbuf2.o charset.o debug.o errors.o external.o filelib.o findsep.o findsep2.o http.o iconvert.o mchar.o parse.o prefs.o relaylib.o rip_manager.o ripaac.o ripogg.o ripstream.o socklib.o threadlib.o utf8.o ranlib libstreamripper.a make[2]: Leaving directory '/usr/src/slapt-src/audio/streamripper/streamripper-1.64.6/lib' make[1]: Leaving directory '/usr/src/slapt-src/audio/streamripper/streamripper-1.64.6/lib' make[1]: Entering directory '/usr/src/slapt-src/audio/streamripper/streamripper-1.64.6' gcc -DHAVE_CONFIG_H -I. -I./lib -I/usr/include -I/usr/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/src/slapt-src/audio/streamripper/streamripper-1.64.6/lib -D__UNIX__ -O2 -fPIC -Wall -MT streamripper.o -MD -MP -MF .deps/streamripper.Tpo -c -o streamripper.o `test -f 'console/streamripper.c' || echo './'`console/streamripper.c In function ‘parse_arguments’, inlined from ‘main’ at console/streamripper.c:93:5: console/streamripper.c:343:5: warning: ‘strncpy’ specified bound 8192 equals destination size [-Wstringop-truncation] 343 | strncpy (prefs->url, argv[1], MAX_URL_LEN); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ console/streamripper.c:493:13: warning: ‘strncpy’ specified bound 254 equals destination size [-Wstringop-truncation] 493 | strncpy(prefs->rules_file, argv[i], SR_MAX_PATH); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ console/streamripper.c:486:13: warning: ‘strncpy’ specified bound 1024 equals destination size [-Wstringop-truncation] 486 | strncpy(prefs->useragent, argv[i], MAX_USERAGENT_STR); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ console/streamripper.c:467:17: warning: ‘strncpy’ specified bound 254 equals destination size [-Wstringop-truncation] 467 | strncpy(prefs->relay_ip, argv[i], SR_MAX_PATH); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ console/streamripper.c:442:13: warning: ‘strncpy’ specified bound 8192 equals destination size [-Wstringop-truncation] 442 | strncpy(prefs->proxyurl, argv[i], MAX_URL_LEN); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ console/streamripper.c:381:13: warning: ‘strncpy’ specified bound 254 equals destination size [-Wstringop-truncation] 381 | strncpy(prefs->output_directory, argv[i], SR_MAX_PATH); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ console/streamripper.c:371:13: warning: ‘strncpy’ specified bound 254 equals destination size [-Wstringop-truncation] 371 | strncpy (prefs->showfile_pattern, argv[i], SR_MAX_PATH); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ console/streamripper.c:421:13: warning: ‘strncpy’ specified bound 254 equals destination size [-Wstringop-truncation] 421 | strncpy(prefs->pls_file, argv[i], SR_MAX_PATH); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ console/streamripper.c:408:13: warning: ‘strncpy’ specified bound 254 equals destination size [-Wstringop-truncation] 408 | strncpy(prefs->if_name, argv[i], SR_MAX_PATH); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ console/streamripper.c:390:13: warning: ‘strncpy’ specified bound 254 equals destination size [-Wstringop-truncation] 390 | strncpy(prefs->ext_cmd, argv[i], SR_MAX_PATH); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ console/streamripper.c:385:13: warning: ‘strncpy’ specified bound 254 equals destination size [-Wstringop-truncation] 385 | strncpy(prefs->output_pattern, argv[i], SR_MAX_PATH); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In function ‘parse_extended_options’, inlined from ‘parse_arguments’ at console/streamripper.c:500:6, inlined from ‘main’ at console/streamripper.c:93:5: console/streamripper.c:627:9: warning: ‘strncpy’ specified bound 128 equals destination size [-Wstringop-truncation] 627 | strncpy (prefs->cs_opt.codeset_relay, &rule[x], MAX_CODESET_STRING); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ console/streamripper.c:620:9: warning: ‘strncpy’ specified bound 128 equals destination size [-Wstringop-truncation] 620 | strncpy (prefs->cs_opt.codeset_metadata, &rule[x], MAX_CODESET_STRING); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ console/streamripper.c:613:9: warning: ‘strncpy’ specified bound 128 equals destination size [-Wstringop-truncation] 613 | strncpy (prefs->cs_opt.codeset_id3, &rule[x], MAX_CODESET_STRING); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ console/streamripper.c:606:9: warning: ‘strncpy’ specified bound 128 equals destination size [-Wstringop-truncation] 606 | strncpy (prefs->cs_opt.codeset_filesys, &rule[x], MAX_CODESET_STRING); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ mv -f .deps/streamripper.Tpo .deps/streamripper.Po gcc -O2 -fPIC -Wall -o streamripper streamripper.o lib/libstreamripper.a -lfaad -lmad -lpthread -liberty -L/usr/lib -logg -L/usr/lib -lvorbis -lm -lglib-2.0 -lm make[1]: Leaving directory '/usr/src/slapt-src/audio/streamripper/streamripper-1.64.6' make INSTALL_PROGRAM="/bin/sh /usr/src/slapt-src/audio/streamripper/streamripper-1.64.6/install-sh -c -s" \ install_sh_PROGRAM="/bin/sh /usr/src/slapt-src/audio/streamripper/streamripper-1.64.6/install-sh -c -s" INSTALL_STRIP_FLAG=-s \ `test -z '' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG=''"` install make[1]: Entering directory '/usr/src/slapt-src/audio/streamripper/streamripper-1.64.6' Making install in lib make[2]: Entering directory '/usr/src/slapt-src/audio/streamripper/streamripper-1.64.6/lib' make[3]: Entering directory '/usr/src/slapt-src/audio/streamripper/streamripper-1.64.6/lib' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/usr/src/slapt-src/audio/streamripper/streamripper-1.64.6/lib' make[2]: Leaving directory '/usr/src/slapt-src/audio/streamripper/streamripper-1.64.6/lib' make[2]: Entering directory '/usr/src/slapt-src/audio/streamripper/streamripper-1.64.6' make[3]: Entering directory '/usr/src/slapt-src/audio/streamripper/streamripper-1.64.6' test -z "/usr/bin" || /usr/bin/mkdir -p "/usr/src/slapt-src/audio/streamripper/package-streamripper/usr/bin" /bin/sh /usr/src/slapt-src/audio/streamripper/streamripper-1.64.6/install-sh -c -s 'streamripper' '/usr/src/slapt-src/audio/streamripper/package-streamripper/usr/bin/streamripper' test -z "/usr/man/man1" || /usr/bin/mkdir -p "/usr/src/slapt-src/audio/streamripper/package-streamripper/usr/man/man1" /usr/bin/ginstall -c -m 644 './streamripper.1' '/usr/src/slapt-src/audio/streamripper/package-streamripper/usr/man/man1/streamripper.1' make[3]: Leaving directory '/usr/src/slapt-src/audio/streamripper/streamripper-1.64.6' make[2]: Leaving directory '/usr/src/slapt-src/audio/streamripper/streamripper-1.64.6' make[1]: Leaving directory '/usr/src/slapt-src/audio/streamripper/streamripper-1.64.6' Slackware package maker, version 3.14159265. Searching for symbolic links: No symbolic links were found, so we won't make an installation script. You can make your own later in ./install/doinst.sh and rebuild the package if you like. This next step is optional - you can set the directories in your package to some sane permissions. If any of the directories in your package have special permissions, then DO NOT reset them here! Would you like to reset all directory permissions to 755 (drwxr-xr-x) and directory ownerships to root.root ([y]es, [n]o)? n Creating Slackware package: /usr/src/slapt-src/audio/streamripper/streamripper-1.64.6-x86_64-1salix15.0.txz ./ install/ install/slack-desc usr/ usr/bin/ usr/bin/streamripper usr/doc/ usr/doc/streamripper-1.64.6/ usr/doc/streamripper-1.64.6/CHANGES usr/doc/streamripper-1.64.6/COPYING usr/doc/streamripper-1.64.6/INSTALL usr/doc/streamripper-1.64.6/README usr/doc/streamripper-1.64.6/THANKS usr/doc/streamripper-1.64.6/streamripper.SlackBuild usr/man/ usr/man/man1/ usr/man/man1/streamripper.1.gz Slackware package /usr/src/slapt-src/audio/streamripper/streamripper-1.64.6-x86_64-1salix15.0.txz created. Installing package streamripper-1.64.6-x86_64-1salix15.0... | streamripper (Rip SHOUTcast Radio Streams to MP3 Files) | | Streamripper records SHOUTcast and Icecast compatible streams. It uses | meta data within a SHOUTcast stream to determine the beginning and end | of each song, and stores the songs on your hard disk as individual mp3 | files. In addition, Streamripper includes a relay server for listening | to the station while you are recording. | | Homepage: http://streamripper.sourceforge.net/ | | | |