The following packages will be installed: ax25-apps Fetching README... 0%100%100%100%100%100%Done Fetching ax25-apps.SlackBuild... 0%100%100%100%100%100%Done Fetching ax25-apps.info... 0%100%100%100%100%100%Done Fetching doinst.sh... 0%100%100%100%100%100%Done Fetching slack-desc... 0%100%100%100%100%100%Done ax25-apps-0.0.8-rc5/ ax25-apps-0.0.8-rc5/AUTHORS ax25-apps-0.0.8-rc5/COPYING ax25-apps-0.0.8-rc5/ChangeLog ax25-apps-0.0.8-rc5/INSTALL ax25-apps-0.0.8-rc5/Makefile.am ax25-apps-0.0.8-rc5/Makefile.in ax25-apps-0.0.8-rc5/NEWS ax25-apps-0.0.8-rc5/README ax25-apps-0.0.8-rc5/aclocal.m4 ax25-apps-0.0.8-rc5/ax25-apps.spec ax25-apps-0.0.8-rc5/ax25-apps.spec.in ax25-apps-0.0.8-rc5/ax25ipd/ ax25-apps-0.0.8-rc5/ax25ipd/COPYING.ax25ipd ax25-apps-0.0.8-rc5/ax25ipd/HISTORY.ax25ipd ax25-apps-0.0.8-rc5/ax25ipd/Makefile.am ax25-apps-0.0.8-rc5/ax25ipd/Makefile.in ax25-apps-0.0.8-rc5/ax25ipd/README.ax25ipd ax25-apps-0.0.8-rc5/ax25ipd/ax25ipd.c ax25-apps-0.0.8-rc5/ax25ipd/ax25ipd.conf ax25-apps-0.0.8-rc5/ax25ipd/ax25ipd.conf.man ax25-apps-0.0.8-rc5/ax25ipd/ax25ipd.h ax25-apps-0.0.8-rc5/ax25ipd/ax25ipd.man ax25-apps-0.0.8-rc5/ax25ipd/bpqether.c ax25-apps-0.0.8-rc5/ax25ipd/config.c ax25-apps-0.0.8-rc5/ax25ipd/crc.c ax25-apps-0.0.8-rc5/ax25ipd/io.c ax25-apps-0.0.8-rc5/ax25ipd/kiss.c ax25-apps-0.0.8-rc5/ax25ipd/process.c ax25-apps-0.0.8-rc5/ax25ipd/routing.c ax25-apps-0.0.8-rc5/ax25ipd/syslog.c ax25-apps-0.0.8-rc5/ax25mond/ ax25-apps-0.0.8-rc5/ax25mond/Makefile.am ax25-apps-0.0.8-rc5/ax25mond/Makefile.in ax25-apps-0.0.8-rc5/ax25mond/ax25mond.c ax25-apps-0.0.8-rc5/ax25mond/ax25mond.conf ax25-apps-0.0.8-rc5/ax25mond/ax25mond.conf.man ax25-apps-0.0.8-rc5/ax25mond/ax25mond.man ax25-apps-0.0.8-rc5/ax25rtd/ ax25-apps-0.0.8-rc5/ax25rtd/Makefile.am ax25-apps-0.0.8-rc5/ax25rtd/Makefile.in ax25-apps-0.0.8-rc5/ax25rtd/README.ax25rtd ax25-apps-0.0.8-rc5/ax25rtd/TODO.ax25rtd ax25-apps-0.0.8-rc5/ax25rtd/ax25rtctl.c ax25-apps-0.0.8-rc5/ax25rtd/ax25rtctl.man ax25-apps-0.0.8-rc5/ax25rtd/ax25rtd.c ax25-apps-0.0.8-rc5/ax25rtd/ax25rtd.conf ax25-apps-0.0.8-rc5/ax25rtd/ax25rtd.conf.man ax25-apps-0.0.8-rc5/ax25rtd/ax25rtd.h ax25-apps-0.0.8-rc5/ax25rtd/ax25rtd.man ax25-apps-0.0.8-rc5/ax25rtd/cache_ctl.c ax25-apps-0.0.8-rc5/ax25rtd/cache_dump.c ax25-apps-0.0.8-rc5/ax25rtd/config.c ax25-apps-0.0.8-rc5/ax25rtd/listener.c ax25-apps-0.0.8-rc5/call/ ax25-apps-0.0.8-rc5/call/Makefile.am ax25-apps-0.0.8-rc5/call/Makefile.in ax25-apps-0.0.8-rc5/call/call.c ax25-apps-0.0.8-rc5/call/call.h ax25-apps-0.0.8-rc5/call/call.man ax25-apps-0.0.8-rc5/call/crc.c ax25-apps-0.0.8-rc5/call/crc.h ax25-apps-0.0.8-rc5/call/dostime.c ax25-apps-0.0.8-rc5/call/menu.c ax25-apps-0.0.8-rc5/call/menu.h ax25-apps-0.0.8-rc5/call/yapp.c ax25-apps-0.0.8-rc5/compile ax25-apps-0.0.8-rc5/config.guess ax25-apps-0.0.8-rc5/config.h.in ax25-apps-0.0.8-rc5/config.sub ax25-apps-0.0.8-rc5/configure ax25-apps-0.0.8-rc5/configure.ac ax25-apps-0.0.8-rc5/depcomp ax25-apps-0.0.8-rc5/install-sh ax25-apps-0.0.8-rc5/listen/ ax25-apps-0.0.8-rc5/listen/Makefile.am ax25-apps-0.0.8-rc5/listen/Makefile.in ax25-apps-0.0.8-rc5/listen/arpdump.c ax25-apps-0.0.8-rc5/listen/ax25dump.c ax25-apps-0.0.8-rc5/listen/flexnetdump.c ax25-apps-0.0.8-rc5/listen/icmpdump.c ax25-apps-0.0.8-rc5/listen/ipdump.c ax25-apps-0.0.8-rc5/listen/kissdump.c ax25-apps-0.0.8-rc5/listen/listen.c ax25-apps-0.0.8-rc5/listen/listen.h ax25-apps-0.0.8-rc5/listen/listen.man ax25-apps-0.0.8-rc5/listen/nrdump.c ax25-apps-0.0.8-rc5/listen/opentracdump.c ax25-apps-0.0.8-rc5/listen/ripdump.c ax25-apps-0.0.8-rc5/listen/rosedump.c ax25-apps-0.0.8-rc5/listen/rspfdump.c ax25-apps-0.0.8-rc5/listen/tcpdump.c ax25-apps-0.0.8-rc5/listen/udpdump.c ax25-apps-0.0.8-rc5/listen/utils.c ax25-apps-0.0.8-rc5/ltmain.sh ax25-apps-0.0.8-rc5/m4/ ax25-apps-0.0.8-rc5/m4/libtool.m4 ax25-apps-0.0.8-rc5/m4/ltoptions.m4 ax25-apps-0.0.8-rc5/m4/ltsugar.m4 ax25-apps-0.0.8-rc5/m4/ltversion.m4 ax25-apps-0.0.8-rc5/m4/lt~obsolete.m4 ax25-apps-0.0.8-rc5/missing ax25-apps-0.0.8-rc5/pathnames.h checking for a BSD-compatible install... /usr/bin/ginstall -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking for gawk... (cached) gawk checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... gcc3 checking whether ln -s works... yes checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking whether gcc needs -traditional... no checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /usr/bin/sed checking for fgrep... /usr/bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... dlltool checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /usr/bin/dd checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1 checking for mt... mt checking if mt is a manifest tool... no checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for ax25_config_load_ports in -lax25... yes checking for initscr in -lncursesw... yes checking for struct ax25_fwd_struct... yes checking for struct nr_route_struct.ndigis... yes checking for struct rose_facilities_struct... yes checking for dirent.h that defines DIR... yes checking for library containing opendir... none required checking for ANSI C header files... (cached) yes checking for sys/wait.h that is POSIX.1 compatible... yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking sys/file.h usability... yes checking sys/file.h presence... yes checking for sys/file.h... yes checking sys/ioctl.h usability... yes checking sys/ioctl.h presence... yes checking for sys/ioctl.h... yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking syslog.h usability... yes checking syslog.h presence... yes checking for syslog.h... yes checking termio.h usability... yes checking termio.h presence... yes checking for termio.h... yes checking for unistd.h... (cached) yes checking for an ANSI C-conforming const... yes checking for inline... inline checking for off_t... yes checking whether time.h and sys/time.h may both be included... yes checking whether struct tm is in sys/time.h or time.h... time.h checking for working memcmp... yes checking return type of signal handlers... void checking for utime.h... yes checking whether utime accepts a null argument... yes checking for vprintf... yes checking for _doprnt... no checking for gettimeofday... yes checking for mktime... yes checking for select... yes checking for socket... yes checking for strdup... yes checking for strerror... yes checking for strspn... yes checking for strstr... yes checking for strtol... yes checking for strtoul... yes checking for uname... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating call/Makefile config.status: creating ax25ipd/Makefile config.status: creating listen/Makefile config.status: creating Makefile config.status: creating ax25rtd/Makefile config.status: creating ax25mond/Makefile config.status: creating ax25-apps.spec config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands make all-recursive make[1]: Entering directory '/usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5' Making all in ax25ipd make[2]: Entering directory '/usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/ax25ipd' gcc -DHAVE_CONFIG_H -I. -I.. -DAX25_SYSCONFDIR=\""/etc/ax25"\" -DAX25_LOCALSTATEDIR=\""/var/ax25"\" -O2 -fPIC -Wall -MT config.o -MD -MP -MF .deps/config.Tpo -c -o config.o config.c mv -f .deps/config.Tpo .deps/config.Po gcc -DHAVE_CONFIG_H -I. -I.. -DAX25_SYSCONFDIR=\""/etc/ax25"\" -DAX25_LOCALSTATEDIR=\""/var/ax25"\" -O2 -fPIC -Wall -MT crc.o -MD -MP -MF .deps/crc.Tpo -c -o crc.o crc.c mv -f .deps/crc.Tpo .deps/crc.Po gcc -DHAVE_CONFIG_H -I. -I.. -DAX25_SYSCONFDIR=\""/etc/ax25"\" -DAX25_LOCALSTATEDIR=\""/var/ax25"\" -O2 -fPIC -Wall -MT io.o -MD -MP -MF .deps/io.Tpo -c -o io.o io.c mv -f .deps/io.Tpo .deps/io.Po gcc -DHAVE_CONFIG_H -I. -I.. -DAX25_SYSCONFDIR=\""/etc/ax25"\" -DAX25_LOCALSTATEDIR=\""/var/ax25"\" -O2 -fPIC -Wall -MT kiss.o -MD -MP -MF .deps/kiss.Tpo -c -o kiss.o kiss.c mv -f .deps/kiss.Tpo .deps/kiss.Po gcc -DHAVE_CONFIG_H -I. -I.. -DAX25_SYSCONFDIR=\""/etc/ax25"\" -DAX25_LOCALSTATEDIR=\""/var/ax25"\" -O2 -fPIC -Wall -MT ax25ipd.o -MD -MP -MF .deps/ax25ipd.Tpo -c -o ax25ipd.o ax25ipd.c mv -f .deps/ax25ipd.Tpo .deps/ax25ipd.Po gcc -DHAVE_CONFIG_H -I. -I.. -DAX25_SYSCONFDIR=\""/etc/ax25"\" -DAX25_LOCALSTATEDIR=\""/var/ax25"\" -O2 -fPIC -Wall -MT process.o -MD -MP -MF .deps/process.Tpo -c -o process.o process.c mv -f .deps/process.Tpo .deps/process.Po gcc -DHAVE_CONFIG_H -I. -I.. -DAX25_SYSCONFDIR=\""/etc/ax25"\" -DAX25_LOCALSTATEDIR=\""/var/ax25"\" -O2 -fPIC -Wall -MT routing.o -MD -MP -MF .deps/routing.Tpo -c -o routing.o routing.c routing.c: In function ‘route_add’: routing.c:83:13: warning: implicit declaration of function ‘malloc’ [-Wimplicit-function-declaration] 83 | malloc(sizeof(struct route_table_entry)); | ^~~~~~ routing.c:17:1: note: include ‘’ or provide a declaration of ‘malloc’ 16 | #include "ax25ipd.h" +++ |+#include 17 | routing.c:83:13: warning: incompatible implicit declaration of built-in function ‘malloc’ [-Wbuiltin-declaration-mismatch] 83 | malloc(sizeof(struct route_table_entry)); | ^~~~~~ routing.c:83:13: note: include ‘’ or provide a declaration of ‘malloc’ routing.c: In function ‘bcast_add’: routing.c:130:13: warning: incompatible implicit declaration of built-in function ‘malloc’ [-Wbuiltin-declaration-mismatch] 130 | malloc(sizeof(struct bcast_table_entry)); | ^~~~~~ routing.c:130:13: note: include ‘’ or provide a declaration of ‘malloc’ mv -f .deps/routing.Tpo .deps/routing.Po gcc -DHAVE_CONFIG_H -I. -I.. -DAX25_SYSCONFDIR=\""/etc/ax25"\" -DAX25_LOCALSTATEDIR=\""/var/ax25"\" -O2 -fPIC -Wall -MT syslog.o -MD -MP -MF .deps/syslog.Tpo -c -o syslog.o syslog.c mv -f .deps/syslog.Tpo .deps/syslog.Po gcc -DHAVE_CONFIG_H -I. -I.. -DAX25_SYSCONFDIR=\""/etc/ax25"\" -DAX25_LOCALSTATEDIR=\""/var/ax25"\" -O2 -fPIC -Wall -MT bpqether.o -MD -MP -MF .deps/bpqether.Tpo -c -o bpqether.o bpqether.c In function ‘tun_alloc’, inlined from ‘open_ethertap’ at bpqether.c:196:8: bpqether.c:142:17: warning: ‘strncpy’ output may be truncated copying 15 bytes from a string of length 4095 [-Wstringop-truncation] 142 | strncpy(ifr.ifr_name, dev, IFNAMSIZ); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ mv -f .deps/bpqether.Tpo .deps/bpqether.Po /bin/sh ../libtool --tag=CC --mode=link gcc -O2 -fPIC -Wall -o ax25ipd config.o crc.o io.o kiss.o ax25ipd.o process.o routing.o syslog.o bpqether.o -lax25 libtool: link: gcc -O2 -fPIC -Wall -o ax25ipd config.o crc.o io.o kiss.o ax25ipd.o process.o routing.o syslog.o bpqether.o -lax25 name_ax25ipd=$(echo ax25ipd | sed -e 's,x,x,') \ name_Ax25ipd=$(echo $name_ax25ipd | sed -r 's@^(.)@\U\1\E@') && \ name_AX25IPD=$(echo $name_ax25ipd | sed -r 's@^(.*)@\U\1\E@') && \ sed -e "s/@@@ax25ipd@@@/$name_ax25ipd/g" \ -e "s/@@@Ax25ipd@@@/$name_Ax25ipd/g" \ -e "s/@@@AX25IPD@@@/$name_AX25IPD/g" \ ./ax25ipd.man > ax25ipd.8.tmp && \ mv ax25ipd.8.tmp ax25ipd.8; name_ax25ipd=$(echo ax25ipd | sed -e 's,x,x,') \ name_Ax25ipd=$(echo $name_ax25ipd | sed -r 's@^(.)@\U\1\E@') && \ name_AX25IPD=$(echo $name_ax25ipd | sed -r 's@^(.*)@\U\1\E@') && \ sed -e "s/@@@ax25ipd@@@/$name_ax25ipd/g" \ -e "s/@@@Ax25ipd@@@/$name_Ax25ipd/g" \ -e "s/@@@AX25IPD@@@/$name_AX25IPD/g" \ ./ax25ipd.conf.man > ax25ipd.conf.5.tmp && \ mv ax25ipd.conf.5.tmp ax25ipd.conf.5; make[2]: Leaving directory '/usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/ax25ipd' Making all in ax25rtd make[2]: Entering directory '/usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/ax25rtd' gcc -DHAVE_CONFIG_H -I. -I.. -DAX25_SYSCONFDIR=\""/etc/ax25"\" -DAX25_LOCALSTATEDIR=\""/var/ax25"\" -O2 -fPIC -Wall -MT ax25rtd.o -MD -MP -MF .deps/ax25rtd.Tpo -c -o ax25rtd.o ax25rtd.c mv -f .deps/ax25rtd.Tpo .deps/ax25rtd.Po gcc -DHAVE_CONFIG_H -I. -I.. -DAX25_SYSCONFDIR=\""/etc/ax25"\" -DAX25_LOCALSTATEDIR=\""/var/ax25"\" -O2 -fPIC -Wall -MT cache_ctl.o -MD -MP -MF .deps/cache_ctl.Tpo -c -o cache_ctl.o cache_ctl.c mv -f .deps/cache_ctl.Tpo .deps/cache_ctl.Po gcc -DHAVE_CONFIG_H -I. -I.. -DAX25_SYSCONFDIR=\""/etc/ax25"\" -DAX25_LOCALSTATEDIR=\""/var/ax25"\" -O2 -fPIC -Wall -MT cache_dump.o -MD -MP -MF .deps/cache_dump.Tpo -c -o cache_dump.o cache_dump.c mv -f .deps/cache_dump.Tpo .deps/cache_dump.Po gcc -DHAVE_CONFIG_H -I. -I.. -DAX25_SYSCONFDIR=\""/etc/ax25"\" -DAX25_LOCALSTATEDIR=\""/var/ax25"\" -O2 -fPIC -Wall -MT config.o -MD -MP -MF .deps/config.Tpo -c -o config.o config.c mv -f .deps/config.Tpo .deps/config.Po gcc -DHAVE_CONFIG_H -I. -I.. -DAX25_SYSCONFDIR=\""/etc/ax25"\" -DAX25_LOCALSTATEDIR=\""/var/ax25"\" -O2 -fPIC -Wall -MT listener.o -MD -MP -MF .deps/listener.Tpo -c -o listener.o listener.c mv -f .deps/listener.Tpo .deps/listener.Po /bin/sh ../libtool --tag=CC --mode=link gcc -O2 -fPIC -Wall -o ax25rtd ax25rtd.o cache_ctl.o cache_dump.o config.o listener.o -lax25 libtool: link: gcc -O2 -fPIC -Wall -o ax25rtd ax25rtd.o cache_ctl.o cache_dump.o config.o listener.o -lax25 gcc -DHAVE_CONFIG_H -I. -I.. -DAX25_SYSCONFDIR=\""/etc/ax25"\" -DAX25_LOCALSTATEDIR=\""/var/ax25"\" -O2 -fPIC -Wall -MT ax25rtctl.o -MD -MP -MF .deps/ax25rtctl.Tpo -c -o ax25rtctl.o ax25rtctl.c mv -f .deps/ax25rtctl.Tpo .deps/ax25rtctl.Po /bin/sh ../libtool --tag=CC --mode=link gcc -O2 -fPIC -Wall -o ax25rtctl ax25rtctl.o -lax25 libtool: link: gcc -O2 -fPIC -Wall -o ax25rtctl ax25rtctl.o -lax25 name_ax25rtd=$(echo ax25rtd | sed -e 's,x,x,') \ name_Ax25rtd=$(echo $name_ax25rtd | sed -r 's@^(.)@\U\1\E@') && \ name_AX25RTD=$(echo $name_ax25rtd | sed -r 's@^(.*)@\U\1\E@') && \ name_ax25rtctl=$(echo ax25rtctl | sed -e 's,x,x,') && \ name_Ax25rtctl=$(echo $name_ax25rtctl | sed -r 's@^(.)@\U\1\E@') && \ name_AX25RTCTL=$(echo $name_ax25rtctl | sed -r 's@^(.*)@\U\1\E@') && \ sed -e "s/@@@ax25rtd@@@/$name_ax25rtd/g" \ -e "s/@@@Ax25rtd@@@/$name_Ax25rtd/g" \ -e "s/@@@AX25RTD@@@/$name_AX25RTD/g" \ -e "s/@@@ax25rtctl@@@/$name_ax25rtctl/g" \ -e "s/@@@Ax25rtctl@@@/$name_Ax25rtctl/g" \ -e "s/@@@AX25RTCTL@@@/$name_AX25RTCTL/g" \ ./ax25rtd.man > ax25rtd.8.tmp && \ mv ax25rtd.8.tmp ax25rtd.8; name_ax25rtd=$(echo ax25rtd | sed -e 's,x,x,') \ name_Ax25rtd=$(echo $name_ax25rtd | sed -r 's@^(.)@\U\1\E@') && \ name_AX25RTD=$(echo $name_ax25rtd | sed -r 's@^(.*)@\U\1\E@') && \ name_ax25rtctl=$(echo ax25rtctl | sed -e 's,x,x,') && \ name_Ax25rtctl=$(echo $name_ax25rtctl | sed -r 's@^(.)@\U\1\E@') && \ name_AX25RTCTL=$(echo $name_ax25rtctl | sed -r 's@^(.*)@\U\1\E@') && \ sed -e "s/@@@ax25rtd@@@/$name_ax25rtd/g" \ -e "s/@@@Ax25rtd@@@/$name_Ax25rtd/g" \ -e "s/@@@AX25RTD@@@/$name_AX25RTD/g" \ -e "s/@@@ax25rtctl@@@/$name_ax25rtctl/g" \ -e "s/@@@Ax25rtctl@@@/$name_Ax25rtctl/g" \ -e "s/@@@AX25RTCTL@@@/$name_AX25RTCTL/g" \ ./ax25rtctl.man > ax25rtctl.8.tmp && \ mv ax25rtctl.8.tmp ax25rtctl.8; name_ax25rtd=$(echo ax25rtd | sed -e 's,x,x,') \ name_Ax25rtd=$(echo $name_ax25rtd | sed -r 's@^(.)@\U\1\E@') && \ name_AX25RTD=$(echo $name_ax25rtd | sed -r 's@^(.*)@\U\1\E@') && \ name_ax25rtctl=$(echo ax25rtctl | sed -e 's,x,x,') && \ name_Ax25rtctl=$(echo $name_ax25rtctl | sed -r 's@^(.)@\U\1\E@') && \ name_AX25RTCTL=$(echo $name_ax25rtctl | sed -r 's@^(.*)@\U\1\E@') && \ sed -e "s/@@@ax25rtd@@@/$name_ax25rtd/g" \ -e "s/@@@Ax25rtd@@@/$name_Ax25rtd/g" \ -e "s/@@@AX25RTD@@@/$name_AX25RTD/g" \ -e "s/@@@ax25rtctl@@@/$name_ax25rtctl/g" \ -e "s/@@@Ax25rtctl@@@/$name_Ax25rtctl/g" \ -e "s/@@@AX25RTCTL@@@/$name_AX25RTCTL/g" \ ./ax25rtd.conf.man > ax25rtd.conf.5.tmp && \ mv ax25rtd.conf.5.tmp ax25rtd.conf.5; make[2]: Leaving directory '/usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/ax25rtd' Making all in call make[2]: Entering directory '/usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/call' gcc -DHAVE_CONFIG_H -I. -I.. -O2 -fPIC -Wall -MT call.o -MD -MP -MF .deps/call.Tpo -c -o call.o call.c In function ‘sevenplname’, inlined from ‘cmd_call’ at call.c:2284:20: call.c:1934:9: warning: ‘strncpy’ output may be truncated copying 12 bytes from a string of length 1012 [-Wstringop-truncation] 1934 | strncpy(orgn, &parms[11], 12); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ call.c:1942:17: warning: ‘strncpy’ output may be truncated copying between 0 and 9 bytes from a string of length 12 [-Wstringop-truncation] 1942 | strncpy(prtn, orgn, cnt - 2); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ call.c: In function ‘cmd_call’: call.c:2606:81: warning: ‘%s’ directive writing up to 1021 bytes into a region of size 65 [-Wformat-overflow=] 2605 | sprintf(s, | ~~~~~~~~~~ 2606 | "Unable to open %s", | ~~~~~~~~~~~~~~~~^~~~ 2607 | buf + 2); | ~~~~~~~~ call.c:2605:49: note: ‘sprintf’ output between 16 and 1037 bytes into a destination of size 80 2605 | sprintf(s, | ^~~~~~~~~~ 2606 | "Unable to open %s", | ~~~~~~~~~~~~~~~~~~~~ 2607 | buf + 2); | ~~~~~~~~ call.c:2499:81: warning: ‘%s’ directive writing up to 1021 bytes into a region of size 65 [-Wformat-overflow=] 2499 | "Uploading from %s", | ^~ call.c:2498:49: note: ‘sprintf’ output between 16 and 1037 bytes into a destination of size 80 2498 | sprintf(s, | ^~~~~~~~~~ 2499 | "Uploading from %s", | ~~~~~~~~~~~~~~~~~~~~ 2500 | t); | ~~ call.c:2489:91: warning: ‘%s’ directive writing up to 1021 bytes into a region of size between 38 and 57 [-Wformat-overflow=] 2489 | "Uploading %ld bytes from %s", | ^~ call.c:2488:49: note: ‘sprintf’ output between 24 and 1064 bytes into a destination of size 80 2488 | sprintf(s, | ^~~~~~~~~~ 2489 | "Uploading %ld bytes from %s", | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2490 | uplsize, t); | ~~~~~~~~~~~ call.c:2558:91: warning: ‘%s’ directive writing up to 1021 bytes into a region of size between 32 and 68 [-Wformat-overflow=] 2558 | "#BIN#%ld#|%u#$%s#%s\r", | ^~ call.c:2557:57: note: ‘sprintf’ output between 14 and 1071 bytes into a destination of size 80 2557 | sprintf(s, | ^~~~~~~~~~ 2558 | "#BIN#%ld#|%u#$%s#%s\r", | ~~~~~~~~~~~~~~~~~~~~~~~~ 2559 | uplsize, | ~~~~~~~~ 2560 | crc, | ~~~~ 2561 | unix_to_sfbin_date_string(file_time), | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2562 | t); | ~~ call.c:2270:49: warning: ‘parmsbytes’ may be used uninitialized in this function [-Wmaybe-uninitialized] 2270 | start_ab_download(mode, | ^~~~~~~~~~~~~~~~~~~~~~~ 2271 | &swin, | ~~~~~~ 2272 | &wintab, | ~~~~~~~~ 2273 | parms, | ~~~~~~ 2274 | parmsbytes, | ~~~~~~~~~~~ 2275 | restbuf, | ~~~~~~~~ 2276 | restbytes, | ~~~~~~~~~~ 2277 | &gp, | ~~~~ 2278 | call); | ~~~~~ mv -f .deps/call.Tpo .deps/call.Po gcc -DHAVE_CONFIG_H -I. -I.. -O2 -fPIC -Wall -MT menu.o -MD -MP -MF .deps/menu.Tpo -c -o menu.o menu.c mv -f .deps/menu.Tpo .deps/menu.Po gcc -DHAVE_CONFIG_H -I. -I.. -O2 -fPIC -Wall -MT crc.o -MD -MP -MF .deps/crc.Tpo -c -o crc.o crc.c mv -f .deps/crc.Tpo .deps/crc.Po gcc -DHAVE_CONFIG_H -I. -I.. -O2 -fPIC -Wall -MT yapp.o -MD -MP -MF .deps/yapp.Tpo -c -o yapp.o yapp.c mv -f .deps/yapp.Tpo .deps/yapp.Po gcc -DHAVE_CONFIG_H -I. -I.. -O2 -fPIC -Wall -MT dostime.o -MD -MP -MF .deps/dostime.Tpo -c -o dostime.o dostime.c mv -f .deps/dostime.Tpo .deps/dostime.Po /bin/sh ../libtool --tag=CC --mode=link gcc -O2 -fPIC -Wall -o call call.o menu.o crc.o yapp.o dostime.o -lncursesw -lax25 libtool: link: gcc -O2 -fPIC -Wall -o call call.o menu.o crc.o yapp.o dostime.o -lncursesw -lax25 name_call=$(echo call | sed -e 's,x,x,') \ name_Call=$(echo $name_call | sed -r 's@^(.)@\U\1\E@') && \ name_CALL=$(echo $name_call | sed -r 's@^(.*)@\U\1\E@') && \ name_listen=$(echo listen | sed -e 's,x,x,') \ name_Listen=$(echo $name_listen | sed -r 's@^(.)@\U\1\E@') && \ name_LISTEN=$(echo $name_listen | sed -r 's@^(.*)@\U\1\E@') &&\ sed -e "s/@@@call@@@/$name_call/g" \ -e "s/@@@Call@@@/$name_Call/g" \ -e "s/@@@CALL@@@/$name_CALL/g" \ -e "s/@@@listen@@@/$name_listen/g" \ -e "s/@@@Listen@@@/$name_Listen/g" \ -e "s/@@@LISTEN@@@/$name_LISTEN/g" \ ./call.man > call.1.tmp && \ mv call.1.tmp call.1; make[2]: Leaving directory '/usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/call' Making all in listen make[2]: Entering directory '/usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/listen' gcc -DHAVE_CONFIG_H -I. -I.. -O2 -fPIC -Wall -MT listen.o -MD -MP -MF .deps/listen.Tpo -c -o listen.o listen.c listen.c: In function ‘display_timestamp’: listen.c:73:52: warning: ‘%06u’ directive output may be truncated writing 6 bytes into a region of size between 2 and 7 [-Wformat-truncation=] 73 | snprintf(buf, sizeof(buf), "%02d:%02d:%02d.%06u", | ^~~~ listen.c:73:36: note: directive argument in the range [0, 999999] 73 | snprintf(buf, sizeof(buf), "%02d:%02d:%02d.%06u", | ^~~~~~~~~~~~~~~~~~~~~ listen.c:73:9: note: ‘snprintf’ output between 16 and 21 bytes into a destination of size 16 73 | snprintf(buf, sizeof(buf), "%02d:%02d:%02d.%06u", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 74 | hours, minutes, seconds, usec); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ listen.c:73:52: warning: ‘%06u’ directive output may be truncated writing 6 bytes into a region of size between 2 and 7 [-Wformat-truncation=] 73 | snprintf(buf, sizeof(buf), "%02d:%02d:%02d.%06u", | ^~~~ listen.c:73:36: note: directive argument in the range [0, 999999] 73 | snprintf(buf, sizeof(buf), "%02d:%02d:%02d.%06u", | ^~~~~~~~~~~~~~~~~~~~~ listen.c:73:9: note: ‘snprintf’ output between 16 and 21 bytes into a destination of size 16 73 | snprintf(buf, sizeof(buf), "%02d:%02d:%02d.%06u", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 74 | hours, minutes, seconds, usec); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ listen.c:73:52: warning: ‘%06u’ directive output may be truncated writing 6 bytes into a region of size between 2 and 7 [-Wformat-truncation=] 73 | snprintf(buf, sizeof(buf), "%02d:%02d:%02d.%06u", | ^~~~ listen.c:73:36: note: directive argument in the range [0, 999999] 73 | snprintf(buf, sizeof(buf), "%02d:%02d:%02d.%06u", | ^~~~~~~~~~~~~~~~~~~~~ listen.c:73:9: note: ‘snprintf’ output between 16 and 21 bytes into a destination of size 16 73 | snprintf(buf, sizeof(buf), "%02d:%02d:%02d.%06u", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 74 | hours, minutes, seconds, usec); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ mv -f .deps/listen.Tpo .deps/listen.Po gcc -DHAVE_CONFIG_H -I. -I.. -O2 -fPIC -Wall -MT kissdump.o -MD -MP -MF .deps/kissdump.Tpo -c -o kissdump.o kissdump.c mv -f .deps/kissdump.Tpo .deps/kissdump.Po gcc -DHAVE_CONFIG_H -I. -I.. -O2 -fPIC -Wall -MT ax25dump.o -MD -MP -MF .deps/ax25dump.Tpo -c -o ax25dump.o ax25dump.c mv -f .deps/ax25dump.Tpo .deps/ax25dump.Po gcc -DHAVE_CONFIG_H -I. -I.. -O2 -fPIC -Wall -MT nrdump.o -MD -MP -MF .deps/nrdump.Tpo -c -o nrdump.o nrdump.c mv -f .deps/nrdump.Tpo .deps/nrdump.Po gcc -DHAVE_CONFIG_H -I. -I.. -O2 -fPIC -Wall -MT arpdump.o -MD -MP -MF .deps/arpdump.Tpo -c -o arpdump.o arpdump.c mv -f .deps/arpdump.Tpo .deps/arpdump.Po gcc -DHAVE_CONFIG_H -I. -I.. -O2 -fPIC -Wall -MT ipdump.o -MD -MP -MF .deps/ipdump.Tpo -c -o ipdump.o ipdump.c mv -f .deps/ipdump.Tpo .deps/ipdump.Po gcc -DHAVE_CONFIG_H -I. -I.. -O2 -fPIC -Wall -MT icmpdump.o -MD -MP -MF .deps/icmpdump.Tpo -c -o icmpdump.o icmpdump.c mv -f .deps/icmpdump.Tpo .deps/icmpdump.Po gcc -DHAVE_CONFIG_H -I. -I.. -O2 -fPIC -Wall -MT udpdump.o -MD -MP -MF .deps/udpdump.Tpo -c -o udpdump.o udpdump.c mv -f .deps/udpdump.Tpo .deps/udpdump.Po gcc -DHAVE_CONFIG_H -I. -I.. -O2 -fPIC -Wall -MT tcpdump.o -MD -MP -MF .deps/tcpdump.Tpo -c -o tcpdump.o tcpdump.c mv -f .deps/tcpdump.Tpo .deps/tcpdump.Po gcc -DHAVE_CONFIG_H -I. -I.. -O2 -fPIC -Wall -MT rspfdump.o -MD -MP -MF .deps/rspfdump.Tpo -c -o rspfdump.o rspfdump.c mv -f .deps/rspfdump.Tpo .deps/rspfdump.Po gcc -DHAVE_CONFIG_H -I. -I.. -O2 -fPIC -Wall -MT ripdump.o -MD -MP -MF .deps/ripdump.Tpo -c -o ripdump.o ripdump.c mv -f .deps/ripdump.Tpo .deps/ripdump.Po gcc -DHAVE_CONFIG_H -I. -I.. -O2 -fPIC -Wall -MT rosedump.o -MD -MP -MF .deps/rosedump.Tpo -c -o rosedump.o rosedump.c mv -f .deps/rosedump.Tpo .deps/rosedump.Po gcc -DHAVE_CONFIG_H -I. -I.. -O2 -fPIC -Wall -MT flexnetdump.o -MD -MP -MF .deps/flexnetdump.Tpo -c -o flexnetdump.o flexnetdump.c mv -f .deps/flexnetdump.Tpo .deps/flexnetdump.Po gcc -DHAVE_CONFIG_H -I. -I.. -O2 -fPIC -Wall -MT opentracdump.o -MD -MP -MF .deps/opentracdump.Tpo -c -o opentracdump.o opentracdump.c mv -f .deps/opentracdump.Tpo .deps/opentracdump.Po gcc -DHAVE_CONFIG_H -I. -I.. -O2 -fPIC -Wall -MT utils.o -MD -MP -MF .deps/utils.Tpo -c -o utils.o utils.c utils.c: In function ‘servname’: utils.c:124:17: warning: ‘strncpy’ specified bound 16 equals destination size [-Wstringop-truncation] 124 | strncpy(str, serv->s_name, 16); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ mv -f .deps/utils.Tpo .deps/utils.Po /bin/sh ../libtool --tag=CC --mode=link gcc -O2 -fPIC -Wall -o listen listen.o kissdump.o ax25dump.o nrdump.o arpdump.o ipdump.o icmpdump.o udpdump.o tcpdump.o rspfdump.o ripdump.o rosedump.o flexnetdump.o opentracdump.o utils.o -lax25 -lncursesw libtool: link: gcc -O2 -fPIC -Wall -o listen listen.o kissdump.o ax25dump.o nrdump.o arpdump.o ipdump.o icmpdump.o udpdump.o tcpdump.o rspfdump.o ripdump.o rosedump.o flexnetdump.o opentracdump.o utils.o -lax25 -lncursesw name_call=$(echo call | sed -e 's,x,x,') \ name_Call=$(echo $name_call | sed -r 's@^(.)@\U\1\E@') && \ name_CALL=$(echo $name_call | sed -r 's@^(.*)@\U\1\E@') && \ name_listen=$(echo listen | sed -e 's,x,x,') \ name_Listen=$(echo $name_listen | sed -r 's@^(.)@\U\1\E@') && \ name_LISTEN=$(echo $name_listen | sed -r 's@^(.*)@\U\1\E@') &&\ sed -e "s/@@@call@@@/$name_call/g" \ -e "s/@@@Call@@@/$name_Call/g" \ -e "s/@@@CALL@@@/$name_CALL/g" \ -e "s/@@@listen@@@/$name_listen/g" \ -e "s/@@@Listen@@@/$name_Listen/g" \ -e "s/@@@LISTEN@@@/$name_LISTEN/g" \ ./listen.man > listen.1.tmp && \ mv listen.1.tmp listen.1; make[2]: Leaving directory '/usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/listen' Making all in ax25mond make[2]: Entering directory '/usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/ax25mond' gcc -DHAVE_CONFIG_H -I. -I.. -DAX25_SYSCONFDIR=\""/etc/ax25"\" -DAX25_LOCALSTATEDIR=\""/var/ax25"\" -O2 -fPIC -Wall -MT ax25mond.o -MD -MP -MF .deps/ax25mond.Tpo -c -o ax25mond.o ax25mond.c mv -f .deps/ax25mond.Tpo .deps/ax25mond.Po /bin/sh ../libtool --tag=CC --mode=link gcc -O2 -fPIC -Wall -o ax25mond ax25mond.o -lax25 libtool: link: gcc -O2 -fPIC -Wall -o ax25mond ax25mond.o -lax25 name_ax25mond=$(echo ax25mond | sed -e 's,x,x,') \ name_Ax25mond=$(echo $name_ax25mond | sed -r 's@^(.)@\U\1\E@') && \ name_AX25MOND=$(echo $name_ax25mond | sed -r 's@^(.*)@\U\1\E@') && \ sed -e "s/@@@ax25mond@@@/$name_ax25mond/g" \ -e "s/@@@Ax25mond@@@/$name_Ax25mond/g" \ -e "s/@@@AX25MOND@@@/$name_AX25MOND/g" \ ./ax25mond.man > ax25mond.8.tmp && \ mv ax25mond.8.tmp ax25mond.8; name_ax25mond=$(echo ax25mond | sed -e 's,x,x,') \ name_Ax25mond=$(echo $name_ax25mond | sed -r 's@^(.)@\U\1\E@') && \ name_AX25MOND=$(echo $name_ax25mond | sed -r 's@^(.*)@\U\1\E@') && \ sed -e "s/@@@ax25mond@@@/$name_ax25mond/g" \ -e "s/@@@Ax25mond@@@/$name_Ax25mond/g" \ -e "s/@@@AX25MOND@@@/$name_AX25MOND/g" \ ./ax25mond.conf.man > ax25mond.conf.5.tmp && \ mv ax25mond.conf.5.tmp ax25mond.conf.5; make[2]: Leaving directory '/usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/ax25mond' make[2]: Entering directory '/usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5' make[2]: Leaving directory '/usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5' make[1]: Leaving directory '/usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5' if test -z 'strip'; then \ make INSTALL_PROGRAM="/bin/sh /usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/install-sh -c -s" \ install_sh_PROGRAM="/bin/sh /usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/install-sh -c -s" INSTALL_STRIP_FLAG=-s \ install; \ else \ make INSTALL_PROGRAM="/bin/sh /usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/install-sh -c -s" \ install_sh_PROGRAM="/bin/sh /usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/install-sh -c -s" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='strip'" install; \ fi make[1]: Entering directory '/usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5' Making install in ax25ipd make[2]: Entering directory '/usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/ax25ipd' make[3]: Entering directory '/usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/ax25ipd' /usr/bin/mkdir -p '/usr/src/slapt-src-x86_64/ham/ax25-apps/package-ax25-apps/usr/sbin' STRIPPROG='strip' /bin/sh ../libtool --mode=install /bin/sh /usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/install-sh -c -s ax25ipd '/usr/src/slapt-src-x86_64/ham/ax25-apps/package-ax25-apps/usr/sbin' libtool: install: /bin/sh /usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/install-sh -c -s ax25ipd /usr/src/slapt-src-x86_64/ham/ax25-apps/package-ax25-apps/usr/sbin/ax25ipd /usr/bin/mkdir -p '/usr/src/slapt-src-x86_64/ham/ax25-apps/package-ax25-apps/usr/doc/ax25-apps-0.0.8_rc5' /usr/bin/ginstall -c -m 644 README.ax25ipd HISTORY.ax25ipd COPYING.ax25ipd '/usr/src/slapt-src-x86_64/ham/ax25-apps/package-ax25-apps/usr/doc/ax25-apps-0.0.8_rc5' /usr/bin/mkdir -p '/usr/src/slapt-src-x86_64/ham/ax25-apps/package-ax25-apps/usr/man/man5' /usr/bin/ginstall -c -m 644 ax25ipd.conf.5 '/usr/src/slapt-src-x86_64/ham/ax25-apps/package-ax25-apps/usr/man/man5' /usr/bin/mkdir -p '/usr/src/slapt-src-x86_64/ham/ax25-apps/package-ax25-apps/usr/man/man8' /usr/bin/ginstall -c -m 644 ax25ipd.8 '/usr/src/slapt-src-x86_64/ham/ax25-apps/package-ax25-apps/usr/man/man8' make[3]: Leaving directory '/usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/ax25ipd' make[2]: Leaving directory '/usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/ax25ipd' Making install in ax25rtd make[2]: Entering directory '/usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/ax25rtd' make[3]: Entering directory '/usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/ax25rtd' /usr/bin/mkdir -p '/usr/src/slapt-src-x86_64/ham/ax25-apps/package-ax25-apps/usr/sbin' STRIPPROG='strip' /bin/sh ../libtool --mode=install /bin/sh /usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/install-sh -c -s ax25rtd ax25rtctl '/usr/src/slapt-src-x86_64/ham/ax25-apps/package-ax25-apps/usr/sbin' libtool: install: /bin/sh /usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/install-sh -c -s ax25rtd /usr/src/slapt-src-x86_64/ham/ax25-apps/package-ax25-apps/usr/sbin/ax25rtd libtool: install: /bin/sh /usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/install-sh -c -s ax25rtctl /usr/src/slapt-src-x86_64/ham/ax25-apps/package-ax25-apps/usr/sbin/ax25rtctl /usr/bin/mkdir -p '/usr/src/slapt-src-x86_64/ham/ax25-apps/package-ax25-apps/usr/doc/ax25-apps-0.0.8_rc5' /usr/bin/ginstall -c -m 644 TODO.ax25rtd README.ax25rtd '/usr/src/slapt-src-x86_64/ham/ax25-apps/package-ax25-apps/usr/doc/ax25-apps-0.0.8_rc5' /usr/bin/mkdir -p '/usr/src/slapt-src-x86_64/ham/ax25-apps/package-ax25-apps/usr/man/man5' /usr/bin/ginstall -c -m 644 ax25rtd.conf.5 '/usr/src/slapt-src-x86_64/ham/ax25-apps/package-ax25-apps/usr/man/man5' /usr/bin/mkdir -p '/usr/src/slapt-src-x86_64/ham/ax25-apps/package-ax25-apps/usr/man/man8' /usr/bin/ginstall -c -m 644 ax25rtd.8 ax25rtctl.8 '/usr/src/slapt-src-x86_64/ham/ax25-apps/package-ax25-apps/usr/man/man8' make[3]: Leaving directory '/usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/ax25rtd' make[2]: Leaving directory '/usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/ax25rtd' Making install in call make[2]: Entering directory '/usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/call' make[3]: Entering directory '/usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/call' /usr/bin/mkdir -p '/usr/src/slapt-src-x86_64/ham/ax25-apps/package-ax25-apps/usr/bin' STRIPPROG='strip' /bin/sh ../libtool --mode=install /bin/sh /usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/install-sh -c -s call '/usr/src/slapt-src-x86_64/ham/ax25-apps/package-ax25-apps/usr/bin' libtool: install: /bin/sh /usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/install-sh -c -s call /usr/src/slapt-src-x86_64/ham/ax25-apps/package-ax25-apps/usr/bin/call /usr/bin/mkdir -p '/usr/src/slapt-src-x86_64/ham/ax25-apps/package-ax25-apps/usr/man/man1' /usr/bin/ginstall -c -m 644 call.1 '/usr/src/slapt-src-x86_64/ham/ax25-apps/package-ax25-apps/usr/man/man1' make[3]: Leaving directory '/usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/call' make[2]: Leaving directory '/usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/call' Making install in listen make[2]: Entering directory '/usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/listen' make[3]: Entering directory '/usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/listen' /usr/bin/mkdir -p '/usr/src/slapt-src-x86_64/ham/ax25-apps/package-ax25-apps/usr/bin' STRIPPROG='strip' /bin/sh ../libtool --mode=install /bin/sh /usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/install-sh -c -s listen '/usr/src/slapt-src-x86_64/ham/ax25-apps/package-ax25-apps/usr/bin' libtool: install: /bin/sh /usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/install-sh -c -s listen /usr/src/slapt-src-x86_64/ham/ax25-apps/package-ax25-apps/usr/bin/listen /usr/bin/mkdir -p '/usr/src/slapt-src-x86_64/ham/ax25-apps/package-ax25-apps/usr/man/man1' /usr/bin/ginstall -c -m 644 listen.1 '/usr/src/slapt-src-x86_64/ham/ax25-apps/package-ax25-apps/usr/man/man1' make[3]: Leaving directory '/usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/listen' make[2]: Leaving directory '/usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/listen' Making install in ax25mond make[2]: Entering directory '/usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/ax25mond' make[3]: Entering directory '/usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/ax25mond' /usr/bin/mkdir -p '/usr/src/slapt-src-x86_64/ham/ax25-apps/package-ax25-apps/usr/sbin' STRIPPROG='strip' /bin/sh ../libtool --mode=install /bin/sh /usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/install-sh -c -s ax25mond '/usr/src/slapt-src-x86_64/ham/ax25-apps/package-ax25-apps/usr/sbin' libtool: install: /bin/sh /usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/install-sh -c -s ax25mond /usr/src/slapt-src-x86_64/ham/ax25-apps/package-ax25-apps/usr/sbin/ax25mond /usr/bin/mkdir -p '/usr/src/slapt-src-x86_64/ham/ax25-apps/package-ax25-apps/usr/man/man5' /usr/bin/ginstall -c -m 644 ax25mond.conf.5 '/usr/src/slapt-src-x86_64/ham/ax25-apps/package-ax25-apps/usr/man/man5' /usr/bin/mkdir -p '/usr/src/slapt-src-x86_64/ham/ax25-apps/package-ax25-apps/usr/man/man8' /usr/bin/ginstall -c -m 644 ax25mond.8 '/usr/src/slapt-src-x86_64/ham/ax25-apps/package-ax25-apps/usr/man/man8' make[3]: Leaving directory '/usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/ax25mond' make[2]: Leaving directory '/usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/ax25mond' make[2]: Entering directory '/usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5' make[3]: Entering directory '/usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5' make[2]: Leaving directory '/usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5' make[1]: Leaving directory '/usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5' make[1]: Entering directory '/usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/ax25ipd' /bin/sh /usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/install-sh -d /usr/src/slapt-src-x86_64/ham/ax25-apps/package-ax25-apps/etc/ax25 /usr/bin/ginstall -c -m 644 ax25ipd.conf /usr/src/slapt-src-x86_64/ham/ax25-apps/package-ax25-apps/etc/ax25/ax25ipd.conf make[1]: Leaving directory '/usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/ax25ipd' make[1]: Entering directory '/usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/ax25rtd' /bin/sh /usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/install-sh -d /usr/src/slapt-src-x86_64/ham/ax25-apps/package-ax25-apps/etc/ax25 /usr/bin/ginstall -c -m 644 ax25rtd.conf /usr/src/slapt-src-x86_64/ham/ax25-apps/package-ax25-apps/etc/ax25/ax25rtd.conf /bin/sh /usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/install-sh -d /usr/src/slapt-src-x86_64/ham/ax25-apps/package-ax25-apps/var/ax25/ax25rtd /usr/bin/ginstall -c -m 644 ax25_route /usr/src/slapt-src-x86_64/ham/ax25-apps/package-ax25-apps/var/ax25/ax25rtd/ax25_route /usr/bin/ginstall: cannot stat 'ax25_route': No such file or directory /usr/bin/ginstall -c -m 644 ip_route /usr/src/slapt-src-x86_64/ham/ax25-apps/package-ax25-apps/var/ax25/ax25rtd/ip_route /usr/bin/ginstall: cannot stat 'ip_route': No such file or directory make[1]: *** [Makefile:886: installconf] Error 1 make[1]: Leaving directory '/usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/ax25rtd' make[1]: Entering directory '/usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/call' /bin/sh /usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/install-sh -d /usr/src/slapt-src-x86_64/ham/ax25-apps/package-ax25-apps make[1]: Leaving directory '/usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/call' make[1]: Entering directory '/usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/listen' make[1]: Nothing to be done for 'installconf'. make[1]: Leaving directory '/usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/listen' make[1]: Entering directory '/usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/ax25mond' /bin/sh /usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/install-sh -d /usr/src/slapt-src-x86_64/ham/ax25-apps/package-ax25-apps/etc/ax25 /usr/bin/ginstall -c -m 644 ax25mond.conf /usr/src/slapt-src-x86_64/ham/ax25-apps/package-ax25-apps/etc/ax25/ax25mond.conf make[1]: Leaving directory '/usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8-rc5/ax25mond' Slackware package maker, version 3.14159265. Searching for symbolic links: No symbolic links were found, so we won't make an installation script. You can make your own later in ./install/doinst.sh and rebuild the package if you like. This next step is optional - you can set the directories in your package to some sane permissions. If any of the directories in your package have special permissions, then DO NOT reset them here! Would you like to reset all directory permissions to 755 (drwxr-xr-x) and directory ownerships to root.root ([y]es, [n]o)? n Creating Slackware package: /usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8_rc5-x86_64-2salix15.0.txz ./ etc/ etc/ax25/ etc/ax25/ax25ipd.conf.new etc/ax25/ax25mond.conf.new etc/ax25/ax25rtd.conf.new install/ install/doinst.sh install/slack-desc usr/ usr/bin/ usr/bin/call usr/bin/listen usr/doc/ usr/doc/ax25-apps-0.0.8_rc5/ usr/doc/ax25-apps-0.0.8_rc5/AUTHORS usr/doc/ax25-apps-0.0.8_rc5/COPYING usr/doc/ax25-apps-0.0.8_rc5/COPYING.ax25ipd usr/doc/ax25-apps-0.0.8_rc5/ChangeLog usr/doc/ax25-apps-0.0.8_rc5/HISTORY.ax25ipd usr/doc/ax25-apps-0.0.8_rc5/NEWS usr/doc/ax25-apps-0.0.8_rc5/README usr/doc/ax25-apps-0.0.8_rc5/README.ax25ipd usr/doc/ax25-apps-0.0.8_rc5/README.ax25rtd usr/doc/ax25-apps-0.0.8_rc5/TODO.ax25rtd usr/doc/ax25-apps-0.0.8_rc5/ax25-apps.SlackBuild usr/man/ usr/man/man1/ usr/man/man1/call.1.gz usr/man/man1/listen.1.gz usr/man/man5/ usr/man/man5/ax25ipd.conf.5.gz usr/man/man5/ax25mond.conf.5.gz usr/man/man5/ax25rtd.conf.5.gz usr/man/man8/ usr/man/man8/ax25ipd.8.gz usr/man/man8/ax25mond.8.gz usr/man/man8/ax25rtctl.8.gz usr/man/man8/ax25rtd.8.gz usr/sbin/ usr/sbin/ax25ipd usr/sbin/ax25mond usr/sbin/ax25rtctl usr/sbin/ax25rtd var/ var/ax25/ var/ax25/ax25rtd/ Slackware package /usr/src/slapt-src-x86_64/ham/ax25-apps/ax25-apps-0.0.8_rc5-x86_64-2salix15.0.txz created. Installing package ax25-apps-0.0.8_rc5-x86_64-2salix15.0... | ax25-apps (AX.25 Packet radio support software) | | Layer 2/3 networking implementation for the linux kernel. | See the AX25 Linux HOWTO for details. | This package provides specific user applications for hamradio that | use AX.25 Net/ROM or ROSE network protocols | | Homepage: http://www.linux-ax25.org/wiki/Main_Page | | | | |