The following packages will be installed: g15daemon Fetching 51g15hook.sh... 0%100%100%100%100%100%Done Fetching README... 0%100%100%100%100%100%Done Fetching README.SLACKWARE... 0%100%100%100%100%100%Done Fetching doinst.sh... 0%100%100%100%100%100%Done Fetching g15daemon-1.9.5.3-uinput.patch... 0%100%100%100%100%100%Done Fetching g15daemon.SlackBuild... 0%100%100%100%100%100%Done Fetching g15daemon.info... 0%100%100%100%100%100%Done Fetching rc.g15daemon... 0%100%100%100%100%100%Done Fetching rc.g15daemon.conf... 0%100%100%100%100%100%Done Fetching slack-desc... 0%100%100%100%100%100%Done g15daemon-1.9.5.3/ g15daemon-1.9.5.3/lang-bindings/ g15daemon-1.9.5.3/lang-bindings/README g15daemon-1.9.5.3/lang-bindings/perl-G15Daemon-0.2.tar.gz g15daemon-1.9.5.3/lang-bindings/G15Daemon.pm g15daemon-1.9.5.3/lang-bindings/pyg15daemon-0.0.tar.bz2 g15daemon-1.9.5.3/configure.in g15daemon-1.9.5.3/g15daemon/ g15daemon-1.9.5.3/g15daemon/linked_lists.c g15daemon-1.9.5.3/g15daemon/g15daemon.h g15daemon-1.9.5.3/g15daemon/Makefile.am g15daemon-1.9.5.3/g15daemon/utility_funcs.c g15daemon-1.9.5.3/g15daemon/main.c g15daemon-1.9.5.3/g15daemon/lcdclient_test.c g15daemon-1.9.5.3/g15daemon/Makefile.in g15daemon-1.9.5.3/g15daemon/g15_plugins.c g15daemon-1.9.5.3/g15daemon/g15logo.h g15daemon-1.9.5.3/INSTALL g15daemon-1.9.5.3/README g15daemon-1.9.5.3/README.usage g15daemon-1.9.5.3/images/ g15daemon-1.9.5.3/images/g15logo2.xcf g15daemon-1.9.5.3/images/g15logo2.wbmp g15daemon-1.9.5.3/Makefile.am g15daemon-1.9.5.3/COPYING g15daemon-1.9.5.3/aclocal.m4 g15daemon-1.9.5.3/README.Solaris g15daemon-1.9.5.3/FAQ g15daemon-1.9.5.3/README.Linux g15daemon-1.9.5.3/rpm/ g15daemon-1.9.5.3/rpm/g15daemon.spec g15daemon-1.9.5.3/Documentation/ g15daemon-1.9.5.3/Documentation/README.client_devel g15daemon-1.9.5.3/Documentation/g15daemon_client_devel.3 g15daemon-1.9.5.3/Documentation/g15daemon.1 g15daemon-1.9.5.3/Makefile.in g15daemon-1.9.5.3/patches/ g15daemon-1.9.5.3/patches/lcdproc-5.1.patch g15daemon-1.9.5.3/patches/graphlcd-1.3_g15daemon_drv.patch g15daemon-1.9.5.3/libg15daemon_client/ g15daemon-1.9.5.3/libg15daemon_client/g15daemon_client.h g15daemon-1.9.5.3/libg15daemon_client/Makefile.am g15daemon-1.9.5.3/libg15daemon_client/Makefile.in g15daemon-1.9.5.3/libg15daemon_client/g15daemon_net.c g15daemon-1.9.5.3/configure g15daemon-1.9.5.3/debian/ g15daemon-1.9.5.3/debian/rules g15daemon-1.9.5.3/debian/control g15daemon-1.9.5.3/debian/compat g15daemon-1.9.5.3/debian/libg15daemon-client-dev.install g15daemon-1.9.5.3/debian/copyright g15daemon-1.9.5.3/debian/changelog g15daemon-1.9.5.3/debian/README.Debian g15daemon-1.9.5.3/debian/libg15daemon-client.install g15daemon-1.9.5.3/debian/g15daemon.install g15daemon-1.9.5.3/debian/docs g15daemon-1.9.5.3/config.h.in g15daemon-1.9.5.3/ChangeLog g15daemon-1.9.5.3/plugins/ g15daemon-1.9.5.3/plugins/g15_plugin_uinput.c g15daemon-1.9.5.3/plugins/Makefile.am g15daemon-1.9.5.3/plugins/Makefile.in g15daemon-1.9.5.3/plugins/g15_plugin_net.c g15daemon-1.9.5.3/plugins/g15_plugin_clock.c g15daemon-1.9.5.3/README.FreeBSD g15daemon-1.9.5.3/TODO g15daemon-1.9.5.3/NEWS g15daemon-1.9.5.3/LICENSE g15daemon-1.9.5.3/config/ g15daemon-1.9.5.3/config/config.sub g15daemon-1.9.5.3/config/depcomp g15daemon-1.9.5.3/config/install-sh g15daemon-1.9.5.3/config/config.guess g15daemon-1.9.5.3/config/ltmain.sh g15daemon-1.9.5.3/config/missing g15daemon-1.9.5.3/contrib/ g15daemon-1.9.5.3/contrib/README g15daemon-1.9.5.3/contrib/xmodmap.sh g15daemon-1.9.5.3/contrib/testbindings.pl g15daemon-1.9.5.3/contrib/libusbshield.kext/ g15daemon-1.9.5.3/contrib/libusbshield.kext/Info.plist g15daemon-1.9.5.3/contrib/g15daemon-rc.init g15daemon-1.9.5.3/contrib/xkb-xorg-7.1-g15daemon.patch g15daemon-1.9.5.3/contrib/99-g15daemon.rules g15daemon-1.9.5.3/contrib/g15daemon-hotplug g15daemon-1.9.5.3/contrib/xmodmaprc g15daemon-1.9.5.3/AUTHORS patching file plugins/g15_plugin_uinput.c Hunk #1 succeeded at 125 with fuzz 2. Hunk #2 succeeded at 145 with fuzz 2. checking build system type... x86_64-slackware-linux-gnu checking host system type... x86_64-slackware-linux-gnu checking target system type... x86_64-slackware-linux-gnu checking for a BSD-compatible install... /usr/bin/ginstall -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking for a sed that does not truncate output... /usr/bin/sed checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for /usr/bin/ld option to reload object files... -r checking for BSD-compatible nm... /usr/bin/nm -B checking whether ln -s works... yes checking how to recognize dependent libraries... pass_all checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... gcc3 checking how to run the C++ preprocessor... g++ -E checking for g77... g77 checking whether we are using the GNU Fortran 77 compiler... yes checking whether g77 accepts -g... yes checking the maximum length of command line arguments... 1572864 checking command to parse /usr/bin/nm -B output from gcc object... ok checking for objdir... .libs checking for ar... ar checking for ranlib... ranlib checking for strip... strip checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC checking if gcc PIC flag -fPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking for shl_load... no checking for shl_load in -ldld... no checking for dlopen... no checking for dlopen in -ldl... yes checking whether a program can dlopen itself... yes checking whether a statically linked program can dlopen itself... no checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by g++... /usr/bin/ld -m elf_x86_64 checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC checking if g++ PIC flag -fPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking for g77 option to produce PIC... -fPIC checking if g77 PIC flag -fPIC works... yes checking if g77 static flag -static works... yes checking if g77 supports -c -o file.o... yes checking whether the g77 linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking for initLibG15 in -lg15... yes checking for g15r_loadWbmpSplash in -lg15render... yes checking for sin in -lm... yes checking for pthread_mutex_init in -lpthread... yes checking for daemon... yes checking for an ANSI C-conforming const... yes checking for pid_t... yes checking for size_t... yes checking whether gcc needs -traditional... no checking sys/select.h usability... yes checking sys/select.h presence... yes checking for sys/select.h... yes checking sys/socket.h usability... yes checking sys/socket.h presence... yes checking for sys/socket.h... yes checking types of arguments for select... int,fd_set *,struct timeval * checking for strftime... yes checking for memset... yes checking for select... yes checking for socket... yes checking for strerror... yes checking for backtrace... yes checking for backtrace_symbols... yes checking for ANSI C header files... (cached) yes checking for sys/wait.h that is POSIX.1 compatible... yes checking linux/input.h usability... yes checking linux/input.h presence... yes checking for linux/input.h... yes checking execinfo.h usability... yes checking execinfo.h presence... yes checking for execinfo.h... yes checking linux/uinput.h usability... yes checking linux/uinput.h presence... yes checking for linux/uinput.h... yes checking for arpa/inet.h... yes checking for fcntl.h... yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for sys/socket.h... (cached) yes checking for unistd.h... (cached) yes checking for libg15.h... yes checking for struct uinput_user_dev.id... yes configure: Necessary includes exist: Compiling Uinput Plugin configure: OS is Linux, using uinput if available configure: creating ./config.status config.status: creating Makefile config.status: creating g15daemon/Makefile config.status: creating libg15daemon_client/Makefile config.status: creating plugins/Makefile config.status: creating config.h config.status: executing depfiles commands make INSTALL_PROGRAM="/bin/sh /usr/src/slapt-src-x86_64/misc/g15daemon/g15daemon-1.9.5.3/config/install-sh -c -s" \ install_sh_PROGRAM="/bin/sh /usr/src/slapt-src-x86_64/misc/g15daemon/g15daemon-1.9.5.3/config/install-sh -c -s" INSTALL_STRIP_FLAG=-s \ `test -z 'strip' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='strip'"` install make[1]: Entering directory '/usr/src/slapt-src-x86_64/misc/g15daemon/g15daemon-1.9.5.3' Making install in libg15daemon_client make[2]: Entering directory '/usr/src/slapt-src-x86_64/misc/g15daemon/g15daemon-1.9.5.3/libg15daemon_client' /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -DDATADIR="\"/usr/share\"" -DPLUGINDIR=\"/usr/lib64/g15daemon/1.9.5.3/plugins\" -I/usr/include -O2 -fcommon -MT g15daemon_net.lo -MD -MP -MF .deps/g15daemon_net.Tpo -c -o g15daemon_net.lo g15daemon_net.c mkdir .libs gcc -DHAVE_CONFIG_H -I. -I.. -DDATADIR=\"/usr/share\" -DPLUGINDIR=\"/usr/lib64/g15daemon/1.9.5.3/plugins\" -I/usr/include -O2 -fcommon -MT g15daemon_net.lo -MD -MP -MF .deps/g15daemon_net.Tpo -c g15daemon_net.c -fPIC -DPIC -o .libs/g15daemon_net.o mv -f .deps/g15daemon_net.Tpo .deps/g15daemon_net.Plo /bin/sh ../libtool --tag=CC --mode=link gcc -O2 -fcommon -version-info 1:2:0 -o libg15daemon_client.la -rpath /usr/lib64 g15daemon_net.lo -lpthread -lm -lg15render -lg15 gcc -shared .libs/g15daemon_net.o -lpthread -lm -lg15render -lg15 -Wl,-soname -Wl,libg15daemon_client.so.1 -o .libs/libg15daemon_client.so.1.0.2 (cd .libs && rm -f libg15daemon_client.so.1 && ln -s libg15daemon_client.so.1.0.2 libg15daemon_client.so.1) (cd .libs && rm -f libg15daemon_client.so && ln -s libg15daemon_client.so.1.0.2 libg15daemon_client.so) creating libg15daemon_client.la (cd .libs && rm -f libg15daemon_client.la && ln -s ../libg15daemon_client.la libg15daemon_client.la) make[3]: Entering directory '/usr/src/slapt-src-x86_64/misc/g15daemon/g15daemon-1.9.5.3/libg15daemon_client' test -z "/usr/lib64" || /usr/bin/mkdir -p "/usr/src/slapt-src-x86_64/misc/g15daemon/package-g15daemon/usr/lib64" /bin/sh ../libtool --mode=install /usr/bin/ginstall -c -s 'libg15daemon_client.la' '/usr/src/slapt-src-x86_64/misc/g15daemon/package-g15daemon/usr/lib64/libg15daemon_client.la' /usr/bin/ginstall -c .libs/libg15daemon_client.so.1.0.2 /usr/src/slapt-src-x86_64/misc/g15daemon/package-g15daemon/usr/lib64/libg15daemon_client.so.1.0.2 strip --strip-unneeded /usr/src/slapt-src-x86_64/misc/g15daemon/package-g15daemon/usr/lib64/libg15daemon_client.so.1.0.2 (cd /usr/src/slapt-src-x86_64/misc/g15daemon/package-g15daemon/usr/lib64 && { ln -s -f libg15daemon_client.so.1.0.2 libg15daemon_client.so.1 || { rm -f libg15daemon_client.so.1 && ln -s libg15daemon_client.so.1.0.2 libg15daemon_client.so.1; }; }) (cd /usr/src/slapt-src-x86_64/misc/g15daemon/package-g15daemon/usr/lib64 && { ln -s -f libg15daemon_client.so.1.0.2 libg15daemon_client.so || { rm -f libg15daemon_client.so && ln -s libg15daemon_client.so.1.0.2 libg15daemon_client.so; }; }) /usr/bin/ginstall -c .libs/libg15daemon_client.lai /usr/src/slapt-src-x86_64/misc/g15daemon/package-g15daemon/usr/lib64/libg15daemon_client.la libtool: install: warning: remember to run `libtool --finish /usr/lib64' test -z "/usr/include" || /usr/bin/mkdir -p "/usr/src/slapt-src-x86_64/misc/g15daemon/package-g15daemon/usr/include" /usr/bin/ginstall -c -m 644 'g15daemon_client.h' '/usr/src/slapt-src-x86_64/misc/g15daemon/package-g15daemon/usr/include/g15daemon_client.h' make[3]: Leaving directory '/usr/src/slapt-src-x86_64/misc/g15daemon/g15daemon-1.9.5.3/libg15daemon_client' make[2]: Leaving directory '/usr/src/slapt-src-x86_64/misc/g15daemon/g15daemon-1.9.5.3/libg15daemon_client' Making install in g15daemon make[2]: Entering directory '/usr/src/slapt-src-x86_64/misc/g15daemon/g15daemon-1.9.5.3/g15daemon' gcc -DHAVE_CONFIG_H -I. -I.. -I../libg15daemon_client/ -DDATADIR="\"/usr/share\"" -DPLUGINDIR=\"/usr/lib64/g15daemon/1.9.5.3/plugins\" -I/usr/include -DG15DAEMON_BUILD -Wall -O2 -fcommon -MT lcdclient_test.o -MD -MP -MF .deps/lcdclient_test.Tpo -c -o lcdclient_test.o lcdclient_test.c lcdclient_test.c: In function ‘main’: lcdclient_test.c:55:6: warning: this ‘else’ clause does not guard... [-Wmisleading-indentation] 55 | }else | ^~~~ lcdclient_test.c:58:9: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘else’ 58 | if(argc<2) | ^~ lcdclient_test.c:89:31: warning: format ‘%i’ expects argument of type ‘int’, but argument 2 has type ‘ssize_t’ {aka ‘long int’} [-Wformat=] 89 | printf("sent %i bytes\n",send(g15screen_fd, packet, 1, MSG_OOB )); | ~^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | | | | int ssize_t {aka long int} | %li lcdclient_test.c:70:17: warning: unused variable ‘foo’ [-Wunused-variable] 70 | int foo = 0; | ^~~ lcdclient_test.c:48:23: warning: variable ‘retval’ set but not used [-Wunused-but-set-variable] 48 | int g15screen_fd, retval; | ^~~~~~ mv -f .deps/lcdclient_test.Tpo .deps/lcdclient_test.Po /bin/sh ../libtool --tag=CC --mode=link gcc -DG15DAEMON_BUILD -Wall -O2 -fcommon -o g15daemontest lcdclient_test.o ../libg15daemon_client/libg15daemon_client.la -lpthread -lm -lg15render -lg15 mkdir .libs gcc -DG15DAEMON_BUILD -Wall -O2 -fcommon -o .libs/g15daemontest lcdclient_test.o ../libg15daemon_client/.libs/libg15daemon_client.so -lpthread -lm -lg15render -lg15 creating g15daemontest gcc -DHAVE_CONFIG_H -I. -I.. -I../libg15daemon_client/ -DDATADIR="\"/usr/share\"" -DPLUGINDIR=\"/usr/lib64/g15daemon/1.9.5.3/plugins\" -I/usr/include -DG15DAEMON_BUILD -Wall -O2 -fcommon -MT utility_funcs.o -MD -MP -MF .deps/utility_funcs.Tpo -c -o utility_funcs.o utility_funcs.c utility_funcs.c: In function ‘uf_create_pidfile’: utility_funcs.c:164:29: warning: operation on ‘l’ may be undefined [-Wsequence-point] 164 | if (write(fd, pidtxt, l = strlen(pidtxt)) != l) { | ~~^~~~~~~~~~~~~~~~ utility_funcs.c: In function ‘g15daemon_init_refresh’: utility_funcs.c:81:3: warning: ‘attr’ may be used uninitialized [-Wmaybe-uninitialized] 81 | pthread_cond_init(&lcd_refresh, &attr); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from utility_funcs.c:27: /usr/include/pthread.h:998:12: note: by argument 2 of type ‘const pthread_condattr_t * restrict’ to ‘pthread_cond_init’ declared here 998 | extern int pthread_cond_init (pthread_cond_t *__restrict __cond, | ^~~~~~~~~~~~~~~~~ utility_funcs.c:80:22: note: ‘attr’ declared here 80 | pthread_condattr_t attr; | ^~~~ mv -f .deps/utility_funcs.Tpo .deps/utility_funcs.Po gcc -DHAVE_CONFIG_H -I. -I.. -I../libg15daemon_client/ -DDATADIR="\"/usr/share\"" -DPLUGINDIR=\"/usr/lib64/g15daemon/1.9.5.3/plugins\" -I/usr/include -DG15DAEMON_BUILD -Wall -O2 -fcommon -MT main.o -MD -MP -MF .deps/main.Tpo -c -o main.o main.c main.c: In function ‘main’: main.c:414:9: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation] 414 | for(i=1;id_name,200); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ g15_plugins.c: In function ‘g15_open_all_plugins’: g15_plugins.c:349:24: warning: ‘sprintf’ may write a terminating nul past the end of the destination [-Wformat-overflow=] 349 | sprintf(tmp,"%i",i); | ^ g15_plugins.c:349:9: note: ‘sprintf’ output between 2 and 11 bytes into a destination of size 10 349 | sprintf(tmp,"%i",i); | ^~~~~~~~~~~~~~~~~~~ g15_plugins.c:323:17: warning: ‘strncat’ output may be truncated copying 200 bytes from a string of length 255 [-Wstringop-truncation] 323 | strncat(pluginname,ep->d_name,200); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ g15_plugins.c:326:34: warning: ‘sprintf’ may write a terminating nul past the end of the destination [-Wformat-overflow=] 326 | sprintf(tmp,"%i",loadcount); | ^ g15_plugins.c:326:19: note: ‘sprintf’ output between 2 and 11 bytes into a destination of size 10 326 | sprintf(tmp,"%i",loadcount); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ mv -f .deps/g15_plugins.Tpo .deps/g15_plugins.Po /bin/sh ../libtool --tag=CC --mode=link gcc -DG15DAEMON_BUILD -Wall -O2 -fcommon -rdynamic -o g15daemon utility_funcs.o main.o linked_lists.o g15_plugins.o -ldl -lpthread -lm -lg15render -lg15 gcc -DG15DAEMON_BUILD -Wall -O2 -fcommon -rdynamic -o g15daemon utility_funcs.o main.o linked_lists.o g15_plugins.o -ldl -lpthread -lm -lg15render -lg15 make[3]: Entering directory '/usr/src/slapt-src-x86_64/misc/g15daemon/g15daemon-1.9.5.3/g15daemon' test -z "/usr/sbin" || /usr/bin/mkdir -p "/usr/src/slapt-src-x86_64/misc/g15daemon/package-g15daemon/usr/sbin" STRIPPROG='strip' /bin/sh ../libtool --mode=install /bin/sh /usr/src/slapt-src-x86_64/misc/g15daemon/g15daemon-1.9.5.3/config/install-sh -c -s 'g15daemon' '/usr/src/slapt-src-x86_64/misc/g15daemon/package-g15daemon/usr/sbin/g15daemon' /bin/sh /usr/src/slapt-src-x86_64/misc/g15daemon/g15daemon-1.9.5.3/config/install-sh -c -s g15daemon /usr/src/slapt-src-x86_64/misc/g15daemon/package-g15daemon/usr/sbin/g15daemon test -z "/usr/include" || /usr/bin/mkdir -p "/usr/src/slapt-src-x86_64/misc/g15daemon/package-g15daemon/usr/include" /usr/bin/ginstall -c -m 644 'g15daemon.h' '/usr/src/slapt-src-x86_64/misc/g15daemon/package-g15daemon/usr/include/g15daemon.h' make[3]: Leaving directory '/usr/src/slapt-src-x86_64/misc/g15daemon/g15daemon-1.9.5.3/g15daemon' make[2]: Leaving directory '/usr/src/slapt-src-x86_64/misc/g15daemon/g15daemon-1.9.5.3/g15daemon' Making install in plugins make[2]: Entering directory '/usr/src/slapt-src-x86_64/misc/g15daemon/g15daemon-1.9.5.3/plugins' /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../libg15daemon_client/ -I../g15daemon -DDATADIR="\"/usr/share\"" -DPLUGINDIR=\"/usr/lib64/g15daemon/1.9.5.3/plugins\" -I/usr/include -Wall -O2 -fcommon -MT g15_plugin_uinput.lo -MD -MP -MF .deps/g15_plugin_uinput.Tpo -c -o g15_plugin_uinput.lo g15_plugin_uinput.c mkdir .libs gcc -DHAVE_CONFIG_H -I. -I.. -I../libg15daemon_client/ -I../g15daemon -DDATADIR=\"/usr/share\" -DPLUGINDIR=\"/usr/lib64/g15daemon/1.9.5.3/plugins\" -I/usr/include -Wall -O2 -fcommon -MT g15_plugin_uinput.lo -MD -MP -MF .deps/g15_plugin_uinput.Tpo -c g15_plugin_uinput.c -fPIC -DPIC -o .libs/g15_plugin_uinput.o mv -f .deps/g15_plugin_uinput.Tpo .deps/g15_plugin_uinput.Plo /bin/sh ../libtool --tag=CC --mode=link gcc -Wall -O2 -fcommon -avoid-version -module -o g15plugin_uinput.la -rpath /usr/lib64/g15daemon/1.9.5.3/plugins g15_plugin_uinput.lo -lpthread -lm -lg15render -lg15 gcc -shared .libs/g15_plugin_uinput.o -lpthread -lm -lg15render -lg15 -Wl,-soname -Wl,g15plugin_uinput.so -o .libs/g15plugin_uinput.so creating g15plugin_uinput.la (cd .libs && rm -f g15plugin_uinput.la && ln -s ../g15plugin_uinput.la g15plugin_uinput.la) /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../libg15daemon_client/ -I../g15daemon -DDATADIR="\"/usr/share\"" -DPLUGINDIR=\"/usr/lib64/g15daemon/1.9.5.3/plugins\" -I/usr/include -Wall -O2 -fcommon -MT g15_plugin_net.lo -MD -MP -MF .deps/g15_plugin_net.Tpo -c -o g15_plugin_net.lo g15_plugin_net.c gcc -DHAVE_CONFIG_H -I. -I.. -I../libg15daemon_client/ -I../g15daemon -DDATADIR=\"/usr/share\" -DPLUGINDIR=\"/usr/lib64/g15daemon/1.9.5.3/plugins\" -I/usr/include -Wall -O2 -fcommon -MT g15_plugin_net.lo -MD -MP -MF .deps/g15_plugin_net.Tpo -c g15_plugin_net.c -fPIC -DPIC -o .libs/g15_plugin_net.o g15_plugin_net.c: In function 'g15_recv': g15_plugin_net.c:215:17: warning: 'memset' used with length equal to number of elements without multiplication by element size [-Wmemset-elt-size] 215 | memset(msgbuf,0,20); | ^~~~~~ mv -f .deps/g15_plugin_net.Tpo .deps/g15_plugin_net.Plo /bin/sh ../libtool --tag=CC --mode=link gcc -Wall -O2 -fcommon -avoid-version -module -o g15plugin_tcpserver.la -rpath /usr/lib64/g15daemon/1.9.5.3/plugins g15_plugin_net.lo -lpthread -lm -lg15render -lg15 gcc -shared .libs/g15_plugin_net.o -lpthread -lm -lg15render -lg15 -Wl,-soname -Wl,g15plugin_tcpserver.so -o .libs/g15plugin_tcpserver.so creating g15plugin_tcpserver.la (cd .libs && rm -f g15plugin_tcpserver.la && ln -s ../g15plugin_tcpserver.la g15plugin_tcpserver.la) /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../libg15daemon_client/ -I../g15daemon -DDATADIR="\"/usr/share\"" -DPLUGINDIR=\"/usr/lib64/g15daemon/1.9.5.3/plugins\" -I/usr/include -Wall -O2 -fcommon -MT g15_plugin_clock.lo -MD -MP -MF .deps/g15_plugin_clock.Tpo -c -o g15_plugin_clock.lo g15_plugin_clock.c gcc -DHAVE_CONFIG_H -I. -I.. -I../libg15daemon_client/ -I../g15daemon -DDATADIR=\"/usr/share\" -DPLUGINDIR=\"/usr/lib64/g15daemon/1.9.5.3/plugins\" -I/usr/include -Wall -O2 -fcommon -MT g15_plugin_clock.lo -MD -MP -MF .deps/g15_plugin_clock.Tpo -c g15_plugin_clock.c -fPIC -DPIC -o .libs/g15_plugin_clock.o g15_plugin_clock.c: In function 'lcdclock': g15_plugin_clock.c:264:9: warning: variable 'ret' set but not used [-Wunused-but-set-variable] 264 | int ret = 0; | ^~~ g15_plugin_clock.c:243:21: warning: '%s' directive writing up to 31 bytes into a region of size between 20 and 30 [-Wformat-overflow=] 243 | sprintf(date, "%d.%s", t->tm_mday, mon); | ^~ ~~~ g15_plugin_clock.c:243:3: note: 'sprintf' output between 3 and 44 bytes into a destination of size 32 243 | sprintf(date, "%d.%s", t->tm_mday, mon); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ mv -f .deps/g15_plugin_clock.Tpo .deps/g15_plugin_clock.Plo /bin/sh ../libtool --tag=CC --mode=link gcc -Wall -O2 -fcommon -avoid-version -module -o g15plugin_clock.la -rpath /usr/lib64/g15daemon/1.9.5.3/plugins g15_plugin_clock.lo -lpthread -lm -lg15render -lg15 gcc -shared .libs/g15_plugin_clock.o -lpthread -lm -lg15render -lg15 -Wl,-soname -Wl,g15plugin_clock.so -o .libs/g15plugin_clock.so creating g15plugin_clock.la (cd .libs && rm -f g15plugin_clock.la && ln -s ../g15plugin_clock.la g15plugin_clock.la) make[3]: Entering directory '/usr/src/slapt-src-x86_64/misc/g15daemon/g15daemon-1.9.5.3/plugins' test -z "/usr/lib64/g15daemon/1.9.5.3/plugins" || /usr/bin/mkdir -p "/usr/src/slapt-src-x86_64/misc/g15daemon/package-g15daemon/usr/lib64/g15daemon/1.9.5.3/plugins" /bin/sh ../libtool --mode=install /usr/bin/ginstall -c -s 'g15plugin_uinput.la' '/usr/src/slapt-src-x86_64/misc/g15daemon/package-g15daemon/usr/lib64/g15daemon/1.9.5.3/plugins/g15plugin_uinput.la' /usr/bin/ginstall -c .libs/g15plugin_uinput.so /usr/src/slapt-src-x86_64/misc/g15daemon/package-g15daemon/usr/lib64/g15daemon/1.9.5.3/plugins/g15plugin_uinput.so strip --strip-unneeded /usr/src/slapt-src-x86_64/misc/g15daemon/package-g15daemon/usr/lib64/g15daemon/1.9.5.3/plugins/g15plugin_uinput.so /usr/bin/ginstall -c .libs/g15plugin_uinput.lai /usr/src/slapt-src-x86_64/misc/g15daemon/package-g15daemon/usr/lib64/g15daemon/1.9.5.3/plugins/g15plugin_uinput.la libtool: install: warning: remember to run `libtool --finish /usr/lib64/g15daemon/1.9.5.3/plugins' /bin/sh ../libtool --mode=install /usr/bin/ginstall -c -s 'g15plugin_tcpserver.la' '/usr/src/slapt-src-x86_64/misc/g15daemon/package-g15daemon/usr/lib64/g15daemon/1.9.5.3/plugins/g15plugin_tcpserver.la' /usr/bin/ginstall -c .libs/g15plugin_tcpserver.so /usr/src/slapt-src-x86_64/misc/g15daemon/package-g15daemon/usr/lib64/g15daemon/1.9.5.3/plugins/g15plugin_tcpserver.so strip --strip-unneeded /usr/src/slapt-src-x86_64/misc/g15daemon/package-g15daemon/usr/lib64/g15daemon/1.9.5.3/plugins/g15plugin_tcpserver.so /usr/bin/ginstall -c .libs/g15plugin_tcpserver.lai /usr/src/slapt-src-x86_64/misc/g15daemon/package-g15daemon/usr/lib64/g15daemon/1.9.5.3/plugins/g15plugin_tcpserver.la libtool: install: warning: remember to run `libtool --finish /usr/lib64/g15daemon/1.9.5.3/plugins' /bin/sh ../libtool --mode=install /usr/bin/ginstall -c -s 'g15plugin_clock.la' '/usr/src/slapt-src-x86_64/misc/g15daemon/package-g15daemon/usr/lib64/g15daemon/1.9.5.3/plugins/g15plugin_clock.la' /usr/bin/ginstall -c .libs/g15plugin_clock.so /usr/src/slapt-src-x86_64/misc/g15daemon/package-g15daemon/usr/lib64/g15daemon/1.9.5.3/plugins/g15plugin_clock.so strip --strip-unneeded /usr/src/slapt-src-x86_64/misc/g15daemon/package-g15daemon/usr/lib64/g15daemon/1.9.5.3/plugins/g15plugin_clock.so /usr/bin/ginstall -c .libs/g15plugin_clock.lai /usr/src/slapt-src-x86_64/misc/g15daemon/package-g15daemon/usr/lib64/g15daemon/1.9.5.3/plugins/g15plugin_clock.la libtool: install: warning: remember to run `libtool --finish /usr/lib64/g15daemon/1.9.5.3/plugins' make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/usr/src/slapt-src-x86_64/misc/g15daemon/g15daemon-1.9.5.3/plugins' make[2]: Leaving directory '/usr/src/slapt-src-x86_64/misc/g15daemon/g15daemon-1.9.5.3/plugins' make[2]: Entering directory '/usr/src/slapt-src-x86_64/misc/g15daemon/g15daemon-1.9.5.3' make[3]: Entering directory '/usr/src/slapt-src-x86_64/misc/g15daemon/g15daemon-1.9.5.3' make[3]: Nothing to be done for 'install-exec-am'. test -z "/usr/doc/g15daemon-1.9.5.3" || /usr/bin/mkdir -p "/usr/src/slapt-src-x86_64/misc/g15daemon/package-g15daemon/usr/doc/g15daemon-1.9.5.3" /usr/bin/ginstall -c -m 644 'FAQ' '/usr/src/slapt-src-x86_64/misc/g15daemon/package-g15daemon/usr/doc/g15daemon-1.9.5.3/FAQ' /usr/bin/ginstall -c -m 644 'README.usage' '/usr/src/slapt-src-x86_64/misc/g15daemon/package-g15daemon/usr/doc/g15daemon-1.9.5.3/README.usage' /usr/bin/ginstall -c -m 644 'README' '/usr/src/slapt-src-x86_64/misc/g15daemon/package-g15daemon/usr/doc/g15daemon-1.9.5.3/README' /usr/bin/ginstall -c -m 644 'ChangeLog' '/usr/src/slapt-src-x86_64/misc/g15daemon/package-g15daemon/usr/doc/g15daemon-1.9.5.3/ChangeLog' /usr/bin/ginstall -c -m 644 'TODO' '/usr/src/slapt-src-x86_64/misc/g15daemon/package-g15daemon/usr/doc/g15daemon-1.9.5.3/TODO' /usr/bin/ginstall -c -m 644 'AUTHORS' '/usr/src/slapt-src-x86_64/misc/g15daemon/package-g15daemon/usr/doc/g15daemon-1.9.5.3/AUTHORS' /usr/bin/ginstall -c -m 644 'NEWS' '/usr/src/slapt-src-x86_64/misc/g15daemon/package-g15daemon/usr/doc/g15daemon-1.9.5.3/NEWS' /usr/bin/ginstall -c -m 644 'LICENSE' '/usr/src/slapt-src-x86_64/misc/g15daemon/package-g15daemon/usr/doc/g15daemon-1.9.5.3/LICENSE' /usr/bin/ginstall -c -m 644 'README.Linux' '/usr/src/slapt-src-x86_64/misc/g15daemon/package-g15daemon/usr/doc/g15daemon-1.9.5.3/README.Linux' /usr/bin/ginstall -c -m 644 'README.FreeBSD' '/usr/src/slapt-src-x86_64/misc/g15daemon/package-g15daemon/usr/doc/g15daemon-1.9.5.3/README.FreeBSD' /usr/bin/ginstall -c -m 644 'README.Solaris' '/usr/src/slapt-src-x86_64/misc/g15daemon/package-g15daemon/usr/doc/g15daemon-1.9.5.3/README.Solaris' test -z "/usr/share/g15daemon/splash" || /usr/bin/mkdir -p "/usr/src/slapt-src-x86_64/misc/g15daemon/package-g15daemon/usr/share/g15daemon/splash" /usr/bin/ginstall -c -m 644 'images/g15logo2.wbmp' '/usr/src/slapt-src-x86_64/misc/g15daemon/package-g15daemon/usr/share/g15daemon/splash/g15logo2.wbmp' test -z "/usr/man/man1" || /usr/bin/mkdir -p "/usr/src/slapt-src-x86_64/misc/g15daemon/package-g15daemon/usr/man/man1" /usr/bin/ginstall -c -m 644 '././Documentation/g15daemon.1' '/usr/src/slapt-src-x86_64/misc/g15daemon/package-g15daemon/usr/man/man1/g15daemon.1' test -z "/usr/man/man3" || /usr/bin/mkdir -p "/usr/src/slapt-src-x86_64/misc/g15daemon/package-g15daemon/usr/man/man3" /usr/bin/ginstall -c -m 644 '././Documentation/g15daemon_client_devel.3' '/usr/src/slapt-src-x86_64/misc/g15daemon/package-g15daemon/usr/man/man3/g15daemon_client_devel.3' make install-data-hook make[4]: Entering directory '/usr/src/slapt-src-x86_64/misc/g15daemon/g15daemon-1.9.5.3' make[4]: Nothing to be done for 'install-data-hook'. make[4]: Leaving directory '/usr/src/slapt-src-x86_64/misc/g15daemon/g15daemon-1.9.5.3' make[3]: Leaving directory '/usr/src/slapt-src-x86_64/misc/g15daemon/g15daemon-1.9.5.3' make[2]: Leaving directory '/usr/src/slapt-src-x86_64/misc/g15daemon/g15daemon-1.9.5.3' make[1]: Leaving directory '/usr/src/slapt-src-x86_64/misc/g15daemon/g15daemon-1.9.5.3' Slackware package maker, version 3.14159265. Searching for symbolic links: usr/lib64/libg15daemon_client.so libg15daemon_client.so.1.0.2 usr/lib64/libg15daemon_client.so.1 libg15daemon_client.so.1.0.2 Making symbolic link creation script: ( cd usr/lib64 ; rm -rf libg15daemon_client.so ) ( cd usr/lib64 ; ln -sf libg15daemon_client.so.1.0.2 libg15daemon_client.so ) ( cd usr/lib64 ; rm -rf libg15daemon_client.so.1 ) ( cd usr/lib64 ; ln -sf libg15daemon_client.so.1.0.2 libg15daemon_client.so.1 ) Unless your existing installation script already contains the code to create these links, you should append these lines to your existing install script. Now's your chance. :^) Would you like to add this stuff to the existing install script and remove the symbolic links ([y]es, [n]o)? y Removing symbolic links: removed './usr/lib64/libg15daemon_client.so.1' removed './usr/lib64/libg15daemon_client.so' Updating your ./install/doinst.sh... This next step is optional - you can set the directories in your package to some sane permissions. If any of the directories in your package have special permissions, then DO NOT reset them here! Would you like to reset all directory permissions to 755 (drwxr-xr-x) and directory ownerships to root.root ([y]es, [n]o)? n Creating Slackware package: /usr/src/slapt-src-x86_64/misc/g15daemon/g15daemon-1.9.5.3-x86_64-3salix15.0.txz ./ etc/ etc/rc.d/ etc/rc.d/rc.g15daemon.conf.new etc/rc.d/rc.g15daemon.new install/ install/doinst.sh install/slack-desc usr/ usr/doc/ usr/doc/g15daemon-1.9.5.3/ usr/doc/g15daemon-1.9.5.3/AUTHORS usr/doc/g15daemon-1.9.5.3/ChangeLog usr/doc/g15daemon-1.9.5.3/FAQ usr/doc/g15daemon-1.9.5.3/LICENSE usr/doc/g15daemon-1.9.5.3/NEWS usr/doc/g15daemon-1.9.5.3/README usr/doc/g15daemon-1.9.5.3/README.FreeBSD usr/doc/g15daemon-1.9.5.3/README.Linux usr/doc/g15daemon-1.9.5.3/README.SLACKWARE usr/doc/g15daemon-1.9.5.3/README.Solaris usr/doc/g15daemon-1.9.5.3/README.usage usr/doc/g15daemon-1.9.5.3/TODO usr/doc/g15daemon-1.9.5.3/g15daemon.SlackBuild usr/include/ usr/include/g15daemon.h usr/include/g15daemon_client.h usr/lib64/ usr/lib64/g15daemon/ usr/lib64/g15daemon/1.9.5.3/ usr/lib64/g15daemon/1.9.5.3/plugins/ usr/lib64/g15daemon/1.9.5.3/plugins/g15plugin_clock.la usr/lib64/g15daemon/1.9.5.3/plugins/g15plugin_clock.so usr/lib64/g15daemon/1.9.5.3/plugins/g15plugin_tcpserver.la usr/lib64/g15daemon/1.9.5.3/plugins/g15plugin_tcpserver.so usr/lib64/g15daemon/1.9.5.3/plugins/g15plugin_uinput.la usr/lib64/g15daemon/1.9.5.3/plugins/g15plugin_uinput.so usr/lib64/libg15daemon_client.so.1.0.2 usr/lib64/pm-utils/ usr/lib64/pm-utils/sleep.d/ usr/lib64/pm-utils/sleep.d/51g15hook usr/man/ usr/man/man1/ usr/man/man1/g15daemon.1.gz usr/man/man3/ usr/man/man3/g15daemon_client_devel.3.gz usr/sbin/ usr/sbin/g15daemon usr/share/ usr/share/g15daemon/ usr/share/g15daemon/splash/ usr/share/g15daemon/splash/g15logo2.wbmp Slackware package /usr/src/slapt-src-x86_64/misc/g15daemon/g15daemon-1.9.5.3-x86_64-3salix15.0.txz created. Installing package g15daemon-1.9.5.3-x86_64-3salix15.0... | g15daemon (G15 keyboard driver) | | The G15daemon is a userspace driver/multiplexer for the keyboard and | its LCD, using libg15 for low-level keyboard control. | | Homepage: http://sourceforge.net/projects/g15daemon/ | | | | | | |