The following packages will be installed: nload Fetching README... 0%100%100%100%100%100%Done Fetching nload.SlackBuild... 0%100%100%100%100%100%Done Fetching nload.info... 0%100%100%100%100%100%Done Fetching slack-desc... 0%100%100%100%100%100%Done nload-0.7.4/ nload-0.7.4/INSTALL nload-0.7.4/install-sh nload-0.7.4/README nload-0.7.4/NEWS nload-0.7.4/COPYING nload-0.7.4/missing nload-0.7.4/configure.in nload-0.7.4/nload.spec.in nload-0.7.4/src/ nload-0.7.4/src/device.h nload-0.7.4/src/traffic_window.h nload-0.7.4/src/devreader-bsd.cpp nload-0.7.4/src/devreader-linux.h nload-0.7.4/src/form_field.cpp nload-0.7.4/src/stringutils.cpp nload-0.7.4/src/main.h nload-0.7.4/src/graph.cpp nload-0.7.4/src/window.h nload-0.7.4/src/window.cpp nload-0.7.4/src/settingstore.h nload-0.7.4/src/device.cpp nload-0.7.4/src/devreader-solaris.cpp nload-0.7.4/src/devreader-hpux.cpp nload-0.7.4/src/templates/ nload-0.7.4/src/templates/cpp_template nload-0.7.4/src/templates/header_template nload-0.7.4/src/screen.h nload-0.7.4/src/devreaderfactory.cpp nload-0.7.4/src/statistics.h nload-0.7.4/src/devreader-linux-sys.cpp nload-0.7.4/src/devreader-linux.cpp nload-0.7.4/src/stringutils.h nload-0.7.4/src/main.cpp nload-0.7.4/src/graph.h nload-0.7.4/src/settingstore.cpp nload-0.7.4/src/screen.cpp nload-0.7.4/src/devreader.h nload-0.7.4/src/traffic_window.cpp nload-0.7.4/src/dataframe.h nload-0.7.4/src/setting.h nload-0.7.4/src/setting.cpp nload-0.7.4/src/devreader-linux-proc.h nload-0.7.4/src/devreader.cpp nload-0.7.4/src/form_field.h nload-0.7.4/src/devreader-bsd.h nload-0.7.4/src/Makefile.am nload-0.7.4/src/settingfilter.h nload-0.7.4/src/statistics.cpp nload-0.7.4/src/opt_window.h nload-0.7.4/src/devreader-linux-sys.h nload-0.7.4/src/devreader-linux-proc.cpp nload-0.7.4/src/devreaderfactory.h nload-0.7.4/src/devreader-solaris.h nload-0.7.4/src/Makefile.in nload-0.7.4/src/settingfilter.cpp nload-0.7.4/src/opt_window.cpp nload-0.7.4/src/devreader-hpux.h nload-0.7.4/aclocal.m4 nload-0.7.4/config.h.in nload-0.7.4/ChangeLog nload-0.7.4/config.sub nload-0.7.4/docs/ nload-0.7.4/docs/nload.1.in nload-0.7.4/docs/Makefile.am nload-0.7.4/docs/Makefile.in nload-0.7.4/run_autotools nload-0.7.4/Makefile.am nload-0.7.4/configure nload-0.7.4/config.guess nload-0.7.4/depcomp nload-0.7.4/Makefile.in nload-0.7.4/AUTHORS checking build system type... x86_64-slackware-linux-gnu checking host system type... x86_64-slackware-linux-gnu checking for a BSD-compatible install... /usr/bin/ginstall -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking for g++... g++ checking whether the C++ compiler works... yes checking for C++ compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking for style of include used by make... GNU checking dependency style of g++... gcc3 checking for gcc... gcc checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... gcc3 checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking whether gcc needs -traditional... no checking for memset... yes checking for initscr in -lncurses... yes checking for new_form in -lform... yes checking for ANSI C header files... yes checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking stdlib.h usability... yes checking stdlib.h presence... yes checking for stdlib.h... yes checking string.h usability... yes checking string.h presence... yes checking for string.h... yes checking unistd.h usability... yes checking unistd.h presence... yes checking for unistd.h... yes checking curses.h usability... yes checking curses.h presence... yes checking for curses.h... yes checking form.h usability... yes checking form.h presence... yes checking for form.h... yes checking math.h usability... yes checking math.h presence... yes checking for math.h... yes checking sys/param.h usability... yes checking sys/param.h presence... yes checking for sys/param.h... yes checking sys/socket.h usability... yes checking sys/socket.h presence... yes checking for sys/socket.h... yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking sys/ioctl.h usability... yes checking sys/ioctl.h presence... yes checking for sys/ioctl.h... yes checking arpa/inet.h usability... yes checking arpa/inet.h presence... yes checking for arpa/inet.h... yes checking netinet/in.h usability... yes checking netinet/in.h presence... yes checking for netinet/in.h... yes checking for an ANSI C-conforming const... yes checking for size_t... yes checking whether time.h and sys/time.h may both be included... yes checking return type of signal handlers... void checking for gettimeofday... yes checking for inet_ntoa... yes checking for socket... yes configure: creating ./config.status config.status: creating Makefile config.status: creating nload.spec config.status: creating docs/Makefile config.status: creating docs/nload.1 config.status: creating src/Makefile config.status: creating config.h config.status: executing depfiles commands make all-recursive make[1]: Entering directory '/usr/src/slapt-src-x86_64/network/nload/nload-0.7.4' Making all in docs make[2]: Entering directory '/usr/src/slapt-src-x86_64/network/nload/nload-0.7.4/docs' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/usr/src/slapt-src-x86_64/network/nload/nload-0.7.4/docs' Making all in src make[2]: Entering directory '/usr/src/slapt-src-x86_64/network/nload/nload-0.7.4/src' g++ -DHAVE_CONFIG_H -I. -I.. -DSYSCONFDIR='"/etc"' -O2 -fPIC -Wall -MT device.o -MD -MP -MF .deps/device.Tpo -c -o device.o device.cpp mv -f .deps/device.Tpo .deps/device.Po g++ -DHAVE_CONFIG_H -I. -I.. -DSYSCONFDIR='"/etc"' -O2 -fPIC -Wall -MT devreader.o -MD -MP -MF .deps/devreader.Tpo -c -o devreader.o devreader.cpp mv -f .deps/devreader.Tpo .deps/devreader.Po g++ -DHAVE_CONFIG_H -I. -I.. -DSYSCONFDIR='"/etc"' -O2 -fPIC -Wall -MT devreaderfactory.o -MD -MP -MF .deps/devreaderfactory.Tpo -c -o devreaderfactory.o devreaderfactory.cpp mv -f .deps/devreaderfactory.Tpo .deps/devreaderfactory.Po g++ -DHAVE_CONFIG_H -I. -I.. -DSYSCONFDIR='"/etc"' -O2 -fPIC -Wall -MT form_field.o -MD -MP -MF .deps/form_field.Tpo -c -o form_field.o form_field.cpp mv -f .deps/form_field.Tpo .deps/form_field.Po g++ -DHAVE_CONFIG_H -I. -I.. -DSYSCONFDIR='"/etc"' -O2 -fPIC -Wall -MT graph.o -MD -MP -MF .deps/graph.Tpo -c -o graph.o graph.cpp mv -f .deps/graph.Tpo .deps/graph.Po g++ -DHAVE_CONFIG_H -I. -I.. -DSYSCONFDIR='"/etc"' -O2 -fPIC -Wall -MT main.o -MD -MP -MF .deps/main.Tpo -c -o main.o main.cpp mv -f .deps/main.Tpo .deps/main.Po g++ -DHAVE_CONFIG_H -I. -I.. -DSYSCONFDIR='"/etc"' -O2 -fPIC -Wall -MT opt_window.o -MD -MP -MF .deps/opt_window.Tpo -c -o opt_window.o opt_window.cpp mv -f .deps/opt_window.Tpo .deps/opt_window.Po g++ -DHAVE_CONFIG_H -I. -I.. -DSYSCONFDIR='"/etc"' -O2 -fPIC -Wall -MT screen.o -MD -MP -MF .deps/screen.Tpo -c -o screen.o screen.cpp screen.cpp: In static member function ‘static int Screen::width()’: screen.cpp:28:9: warning: variable ‘height’ set but not used [-Wunused-but-set-variable] 28 | int height; | ^~~~~~ screen.cpp: In static member function ‘static int Screen::x()’: screen.cpp:44:9: warning: variable ‘y’ set but not used [-Wunused-but-set-variable] 44 | int y; | ^ mv -f .deps/screen.Tpo .deps/screen.Po g++ -DHAVE_CONFIG_H -I. -I.. -DSYSCONFDIR='"/etc"' -O2 -fPIC -Wall -MT setting.o -MD -MP -MF .deps/setting.Tpo -c -o setting.o setting.cpp mv -f .deps/setting.Tpo .deps/setting.Po g++ -DHAVE_CONFIG_H -I. -I.. -DSYSCONFDIR='"/etc"' -O2 -fPIC -Wall -MT settingfilter.o -MD -MP -MF .deps/settingfilter.Tpo -c -o settingfilter.o settingfilter.cpp mv -f .deps/settingfilter.Tpo .deps/settingfilter.Po g++ -DHAVE_CONFIG_H -I. -I.. -DSYSCONFDIR='"/etc"' -O2 -fPIC -Wall -MT settingstore.o -MD -MP -MF .deps/settingstore.Tpo -c -o settingstore.o settingstore.cpp mv -f .deps/settingstore.Tpo .deps/settingstore.Po g++ -DHAVE_CONFIG_H -I. -I.. -DSYSCONFDIR='"/etc"' -O2 -fPIC -Wall -MT statistics.o -MD -MP -MF .deps/statistics.Tpo -c -o statistics.o statistics.cpp mv -f .deps/statistics.Tpo .deps/statistics.Po g++ -DHAVE_CONFIG_H -I. -I.. -DSYSCONFDIR='"/etc"' -O2 -fPIC -Wall -MT stringutils.o -MD -MP -MF .deps/stringutils.Tpo -c -o stringutils.o stringutils.cpp mv -f .deps/stringutils.Tpo .deps/stringutils.Po g++ -DHAVE_CONFIG_H -I. -I.. -DSYSCONFDIR='"/etc"' -O2 -fPIC -Wall -MT traffic_window.o -MD -MP -MF .deps/traffic_window.Tpo -c -o traffic_window.o traffic_window.cpp mv -f .deps/traffic_window.Tpo .deps/traffic_window.Po g++ -DHAVE_CONFIG_H -I. -I.. -DSYSCONFDIR='"/etc"' -O2 -fPIC -Wall -MT window.o -MD -MP -MF .deps/window.Tpo -c -o window.o window.cpp window.cpp: In member function ‘virtual int Window::getWidth()’: window.cpp:130:16: warning: variable ‘height’ set but not used [-Wunused-but-set-variable] 130 | int width, height; | ^~~~~~ window.cpp: In member function ‘virtual int Window::getLeft()’: window.cpp:154:12: warning: variable ‘y’ set but not used [-Wunused-but-set-variable] 154 | int x, y; | ^ window.cpp: In member function ‘virtual int Window::getX()’: window.cpp:178:12: warning: variable ‘y’ set but not used [-Wunused-but-set-variable] 178 | int x, y; | ^ mv -f .deps/window.Tpo .deps/window.Po g++ -DHAVE_CONFIG_H -I. -I.. -DSYSCONFDIR='"/etc"' -O2 -fPIC -Wall -MT devreader-linux.o -MD -MP -MF .deps/devreader-linux.Tpo -c -o devreader-linux.o devreader-linux.cpp mv -f .deps/devreader-linux.Tpo .deps/devreader-linux.Po g++ -DHAVE_CONFIG_H -I. -I.. -DSYSCONFDIR='"/etc"' -O2 -fPIC -Wall -MT devreader-linux-proc.o -MD -MP -MF .deps/devreader-linux-proc.Tpo -c -o devreader-linux-proc.o devreader-linux-proc.cpp mv -f .deps/devreader-linux-proc.Tpo .deps/devreader-linux-proc.Po g++ -DHAVE_CONFIG_H -I. -I.. -DSYSCONFDIR='"/etc"' -O2 -fPIC -Wall -MT devreader-linux-sys.o -MD -MP -MF .deps/devreader-linux-sys.Tpo -c -o devreader-linux-sys.o devreader-linux-sys.cpp mv -f .deps/devreader-linux-sys.Tpo .deps/devreader-linux-sys.Po g++ -O2 -fPIC -Wall -s -o nload device.o devreader.o devreaderfactory.o form_field.o graph.o main.o opt_window.o screen.o setting.o settingfilter.o settingstore.o statistics.o stringutils.o traffic_window.o window.o devreader-linux.o devreader-linux-proc.o devreader-linux-sys.o -lform -lncurses make[2]: Leaving directory '/usr/src/slapt-src-x86_64/network/nload/nload-0.7.4/src' make[2]: Entering directory '/usr/src/slapt-src-x86_64/network/nload/nload-0.7.4' make[2]: Leaving directory '/usr/src/slapt-src-x86_64/network/nload/nload-0.7.4' make[1]: Leaving directory '/usr/src/slapt-src-x86_64/network/nload/nload-0.7.4' Making install in docs make[1]: Entering directory '/usr/src/slapt-src-x86_64/network/nload/nload-0.7.4/docs' /bin/sh /usr/src/slapt-src-x86_64/network/nload/nload-0.7.4/install-sh -d /usr/src/slapt-src-x86_64/network/nload/package-nload/usr/man/man1 /usr/bin/ginstall -c -m 644 ../docs/nload.1 /usr/src/slapt-src-x86_64/network/nload/package-nload/usr/man/man1 gzip -f /usr/src/slapt-src-x86_64/network/nload/package-nload/usr/man/man1/nload.1 make[1]: Leaving directory '/usr/src/slapt-src-x86_64/network/nload/nload-0.7.4/docs' Making install in src make[1]: Entering directory '/usr/src/slapt-src-x86_64/network/nload/nload-0.7.4/src' make[2]: Entering directory '/usr/src/slapt-src-x86_64/network/nload/nload-0.7.4/src' test -z "/usr/bin" || /usr/bin/mkdir -p "/usr/src/slapt-src-x86_64/network/nload/package-nload/usr/bin" /usr/bin/ginstall -c nload '/usr/src/slapt-src-x86_64/network/nload/package-nload/usr/bin' make[2]: Nothing to be done for 'install-data-am'. make[2]: Leaving directory '/usr/src/slapt-src-x86_64/network/nload/nload-0.7.4/src' make[1]: Leaving directory '/usr/src/slapt-src-x86_64/network/nload/nload-0.7.4/src' make[1]: Entering directory '/usr/src/slapt-src-x86_64/network/nload/nload-0.7.4' make[2]: Entering directory '/usr/src/slapt-src-x86_64/network/nload/nload-0.7.4' make[2]: Nothing to be done for 'install-exec-am'. make[2]: Nothing to be done for 'install-data-am'. make[2]: Leaving directory '/usr/src/slapt-src-x86_64/network/nload/nload-0.7.4' make[1]: Leaving directory '/usr/src/slapt-src-x86_64/network/nload/nload-0.7.4' gzip: /usr/src/slapt-src-x86_64/network/nload/package-nload/usr/man/man1/nload.1.gz already has .gz suffix -- unchanged Slackware package maker, version 3.14159265. Searching for symbolic links: No symbolic links were found, so we won't make an installation script. You can make your own later in ./install/doinst.sh and rebuild the package if you like. This next step is optional - you can set the directories in your package to some sane permissions. If any of the directories in your package have special permissions, then DO NOT reset them here! Would you like to reset all directory permissions to 755 (drwxr-xr-x) and directory ownerships to root.root ([y]es, [n]o)? n Creating Slackware package: /usr/src/slapt-src-x86_64/network/nload/nload-0.7.4-x86_64-1salix15.0.txz ./ install/ install/slack-desc usr/ usr/bin/ usr/bin/nload usr/doc/ usr/doc/nload-0.7.4/ usr/doc/nload-0.7.4/AUTHORS usr/doc/nload-0.7.4/COPYING usr/doc/nload-0.7.4/ChangeLog usr/doc/nload-0.7.4/NEWS usr/doc/nload-0.7.4/README usr/doc/nload-0.7.4/nload.SlackBuild usr/man/ usr/man/man1/ usr/man/man1/nload.1.gz Slackware package /usr/src/slapt-src-x86_64/network/nload/nload-0.7.4-x86_64-1salix15.0.txz created. Installing package nload-0.7.4-x86_64-1salix15.0... | nload (network traffic monitor) | | nload is a console application which monitors network traffic | and bandwidth usage in real time. It visualizes the in and | outgoing traffic using two graphs and provides additional | info like total amount of transfered data an min/max network | usage. | | Homepage: https://sourceforge.net/projects/nload/ | | | |