configure.ac:21: installing './compile' configure.ac:13: installing './config.guess' configure.ac:13: installing './config.sub' configure.ac:10: installing './install-sh' configure.ac:10: installing './missing' common/cdc/Makefile.am: installing './depcomp' daemon/Makefile.am:50: warning: source file '../common/seafile-crypt.c' is in a subdirectory, daemon/Makefile.am:50: but option 'subdir-objects' is disabled automake: warning: possible forward-incompatibility. automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. daemon/Makefile.am:50: warning: source file '../common/diff-simple.c' is in a subdirectory, daemon/Makefile.am:50: but option 'subdir-objects' is disabled daemon/Makefile.am:50: warning: source file '../common/branch-mgr.c' is in a subdirectory, daemon/Makefile.am:50: but option 'subdir-objects' is disabled daemon/Makefile.am:50: warning: source file '../common/fs-mgr.c' is in a subdirectory, daemon/Makefile.am:50: but option 'subdir-objects' is disabled daemon/Makefile.am:50: warning: source file '../common/commit-mgr.c' is in a subdirectory, daemon/Makefile.am:50: but option 'subdir-objects' is disabled daemon/Makefile.am:50: warning: source file '../common/log.c' is in a subdirectory, daemon/Makefile.am:50: but option 'subdir-objects' is disabled daemon/Makefile.am:50: warning: source file '../common/rpc-service.c' is in a subdirectory, daemon/Makefile.am:50: but option 'subdir-objects' is disabled daemon/Makefile.am:50: warning: source file '../common/vc-common.c' is in a subdirectory, daemon/Makefile.am:50: but option 'subdir-objects' is disabled daemon/Makefile.am:50: warning: source file '../common/obj-store.c' is in a subdirectory, daemon/Makefile.am:50: but option 'subdir-objects' is disabled daemon/Makefile.am:50: warning: source file '../common/obj-backend-fs.c' is in a subdirectory, daemon/Makefile.am:50: but option 'subdir-objects' is disabled daemon/Makefile.am:50: warning: source file '../common/block-mgr.c' is in a subdirectory, daemon/Makefile.am:50: but option 'subdir-objects' is disabled daemon/Makefile.am:50: warning: source file '../common/block-backend.c' is in a subdirectory, daemon/Makefile.am:50: but option 'subdir-objects' is disabled daemon/Makefile.am:50: warning: source file '../common/block-backend-fs.c' is in a subdirectory, daemon/Makefile.am:50: but option 'subdir-objects' is disabled daemon/Makefile.am:50: warning: source file '../common/mq-mgr.c' is in a subdirectory, daemon/Makefile.am:50: but option 'subdir-objects' is disabled daemon/Makefile.am:50: warning: source file '../common/curl-init.c' is in a subdirectory, daemon/Makefile.am:50: but option 'subdir-objects' is disabled python/seafile/Makefile.am:3: installing './py-compile' configure: WARNING: unrecognized options: --enable-riak, --enable-fuse, --enable-client, --enable-server, --enable-python tree.h seafile-8.0.6/daemon/test-sync-tree.c seafile-8.0.6/daemon/timer.c seafile-8.0.6/daemon/timer.h seafile-8.0.6/daemon/vc-utils.c seafile-8.0.6/daemon/vc-utils.h seafile-8.0.6/daemon/wt-monitor-linux.c seafile-8.0.6/daemon/wt-monitor-macos.c seafile-8.0.6/daemon/wt-monitor-structs.c seafile-8.0.6/daemon/wt-monitor-structs.h seafile-8.0.6/daemon/wt-monitor-win32.c seafile-8.0.6/daemon/wt-monitor.c seafile-8.0.6/daemon/wt-monitor.h seafile-8.0.6/debian/ seafile-8.0.6/debian/README.Debian seafile-8.0.6/debian/changelog seafile-8.0.6/debian/compat seafile-8.0.6/debian/control seafile-8.0.6/debian/copyright seafile-8.0.6/debian/dirs seafile-8.0.6/debian/docs seafile-8.0.6/debian/libseafile-dev.install seafile-8.0.6/debian/libseafile0.install seafile-8.0.6/debian/patches/ seafile-8.0.6/debian/patches/fix-pkgconfig-paths.patch seafile-8.0.6/debian/patches/series seafile-8.0.6/debian/rules seafile-8.0.6/debian/seafile-cli.install seafile-8.0.6/debian/seafile-daemon.install seafile-8.0.6/debian/source/ seafile-8.0.6/debian/source/format seafile-8.0.6/dmg/ seafile-8.0.6/dmg/seafileLayout/ seafile-8.0.6/dmg/seafileLayout/Background/ seafile-8.0.6/dmg/seafileLayout/Background/dmg_background.jpg seafile-8.0.6/dmg/seafileLayout/Icons/ seafile-8.0.6/dmg/seafileLayout/Icons/LayoutItem.042D24CE-36D9-4328-A97F-BCF3DC524509.icns seafile-8.0.6/dmg/seafileLayout/Icons/LayoutItem.209D5BB3-143C-4DB8-8FB9-F1175B8184F2.icns seafile-8.0.6/dmg/seafileLayout/Icons/LayoutItem.7DCEB33C-3B26-463C-9D52-D2E99ADD0AD0.icns seafile-8.0.6/dmg/seafileLayout/Icons/LayoutItem.830478CF-49D6-4772-AC6C-3A56A329536F.icns seafile-8.0.6/dmg/seafileLayout/Icons/LayoutItem.CFA83A1B-E783-4354-88A9-255F0F623398.icns seafile-8.0.6/dmg/seafileLayout/Icons/LayoutItem.E417B39C-5B93-4D7D-AE5A-FC3B0CDFD9D7.icns seafile-8.0.6/dmg/seafileLayout/Info.plist seafile-8.0.6/dmg/seafileLayout/Preview.icns seafile-8.0.6/doc/ seafile-8.0.6/doc/Makefile.am seafile-8.0.6/doc/cli-readme.txt seafile-8.0.6/doc/seaf-cli.1 seafile-8.0.6/doc/seaf-daemon.1 seafile-8.0.6/include/ seafile-8.0.6/include/Makefile.am seafile-8.0.6/include/seafile-error.h seafile-8.0.6/include/seafile-rpc.h seafile-8.0.6/include/seafile.h seafile-8.0.6/integration-tests/ seafile-8.0.6/integration-tests/install-deps.sh seafile-8.0.6/lib/ seafile-8.0.6/lib/Makefile.am seafile-8.0.6/lib/db.c seafile-8.0.6/lib/db.h seafile-8.0.6/lib/include.h seafile-8.0.6/lib/libseafile.pc.in seafile-8.0.6/lib/net.c seafile-8.0.6/lib/net.h seafile-8.0.6/lib/repo.c seafile-8.0.6/lib/repo.vala seafile-8.0.6/lib/rpc_table.py seafile-8.0.6/lib/seafile-object.h seafile-8.0.6/lib/seafile-rpc-wrapper.c seafile-8.0.6/lib/searpc-marshal.h seafile-8.0.6/lib/searpc-signature.h seafile-8.0.6/lib/task.c seafile-8.0.6/lib/task.vala seafile-8.0.6/lib/utils.c seafile-8.0.6/lib/utils.h seafile-8.0.6/m4/ seafile-8.0.6/m4/ax_lib_sqlite3.m4 seafile-8.0.6/m4/glib-gettext.m4 seafile-8.0.6/m4/python.m4 seafile-8.0.6/msi/ seafile-8.0.6/msi/Includes.wxi seafile-8.0.6/msi/Makefile seafile-8.0.6/msi/MyInstallDirDlg.wxs seafile-8.0.6/msi/WixUI_InstallDir_NoLicense.wxs seafile-8.0.6/msi/custom/ seafile-8.0.6/msi/custom/Makefile seafile-8.0.6/msi/custom/custom.c seafile-8.0.6/msi/custom/custom.def seafile-8.0.6/msi/custom/seafile_custom.sln seafile-8.0.6/msi/custom/seafile_custom.vcxproj seafile-8.0.6/msi/custom/seafile_custom.vcxproj.filters seafile-8.0.6/msi/de_de.wxl seafile-8.0.6/msi/en_US.wxl seafile-8.0.6/msi/seafdir.ico seafile-8.0.6/msi/seafile-background.bmp seafile-8.0.6/msi/seafile-top-banner.bmp seafile-8.0.6/msi/seafile.ico seafile-8.0.6/msi/seafile.wxs seafile-8.0.6/msi/strip-files.py seafile-8.0.6/msi/zh_CN.wxl seafile-8.0.6/python/ seafile-8.0.6/python/Makefile.am seafile-8.0.6/python/seafile/ seafile-8.0.6/python/seafile/Makefile.am seafile-8.0.6/python/seafile/__init__.py seafile-8.0.6/python/seafile/rpcclient.py seafile-8.0.6/scripts/ seafile-8.0.6/scripts/breakpad.py seafile-8.0.6/scripts/build/ seafile-8.0.6/scripts/build/build-cli.py seafile-8.0.6/scripts/build/build-deb.py seafile-8.0.6/scripts/build/build-mac-local.py seafile-8.0.6/scripts/build/build-mac.py seafile-8.0.6/scripts/build/build-msi-vs.py seafile-8.0.6/scripts/build/build-msi.py seafile-8.0.6/scripts/build/gen-deb-src.py seafile-8.0.6/scripts/build/notarize.sh seafile-8.0.6/scripts/build/osx.entitlements seafile-8.0.6/scripts/seaf-cli-wrapper.sh seafile-8.0.6/seafile.sln seafile-8.0.6/seafile.vcxproj seafile-8.0.6/setupwin.py seafile-8.0.6/tests/ seafile-8.0.6/tests/sync-auto-test/ seafile-8.0.6/tests/sync-auto-test/README.md seafile-8.0.6/tests/sync-auto-test/__init__.py seafile-8.0.6/tests/sync-auto-test/cli1/ seafile-8.0.6/tests/sync-auto-test/cli1/ccnet.conf seafile-8.0.6/tests/sync-auto-test/cli1/mykey.peer seafile-8.0.6/tests/sync-auto-test/cli2/ seafile-8.0.6/tests/sync-auto-test/cli2/ccnet.conf seafile-8.0.6/tests/sync-auto-test/cli2/mykey.peer seafile-8.0.6/tests/sync-auto-test/requirements.txt seafile-8.0.6/tests/sync-auto-test/run.sh.template seafile-8.0.6/tests/sync-auto-test/seaf_op.py seafile-8.0.6/tests/sync-auto-test/setting.py seafile-8.0.6/tests/sync-auto-test/test.conf.template seafile-8.0.6/tests/sync-auto-test/test_cases/ seafile-8.0.6/tests/sync-auto-test/test_cases/__init__.py seafile-8.0.6/tests/sync-auto-test/test_cases/test_release.py seafile-8.0.6/tests/sync-auto-test/test_cases/test_simple.py seafile-8.0.6/tests/sync-auto-test/util.py seafile-8.0.6/updateversion.sh processing . Creating ./aclocal.m4 ... Running glib-gettextize... Ignore non-fatal messages. Creating po/ subdirectory Copying file po/Makefile.in.in Please add the files codeset.m4 gettext.m4 glibc21.m4 iconv.m4 isc-posix.m4 lcmessage.m4 progtest.m4 from the /usr/share/aclocal directory to your autoconf macro directory or directly to your aclocal.m4 file. You will also need config.guess and config.sub, which you can get from ftp://ftp.gnu.org/pub/gnu/config/. Making ./aclocal.m4 writable ... Running intltoolize... Running libtoolize... libtoolize: putting auxiliary files in '.'. libtoolize: copying file './ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. libtoolize: copying file 'm4/libtool.m4' libtoolize: copying file 'm4/ltoptions.m4' libtoolize: copying file 'm4/ltsugar.m4' libtoolize: copying file 'm4/ltversion.m4' libtoolize: copying file 'm4/lt~obsolete.m4' Running aclocal -I m4 ... Running autoheader... Running automake --gnu ... Running autoconf ... checking for a BSD-compatible install... /usr/bin/ginstall -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking build system type... x86_64-slackware-linux-gnu checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... gcc3 checking for an ANSI C-conforming const... yes checking whether make sets $(MAKE)... (cached) yes checking host system type... x86_64-slackware-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /usr/bin/sed checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for fgrep... /usr/bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-slackware-linux-gnu file names to x86_64-slackware-linux-gnu format... func_convert_file_noop checking how to convert x86_64-slackware-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... dlltool checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /usr/bin/dd checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1 checking for mt... mt checking if mt is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking for valac... /usr/bin/valac checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... no checking for WIN32... no checking for Mac... no checking for Linux... compile in linux checking for uuid_generate in -luuid... yes found library uuid checking for pthread_create in -lpthread... yes found library pthread checking for sqlite3_open in -lsqlite3... yes found library sqlite3 checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for glib-2.0 >= 2.16.0... yes checking for gobject-2.0 >= 2.16.0... yes checking for libsearpc >= 1.0... yes checking for jansson >= 2.2.1... yes checking for libevent >= 2.0... yes checking for zlib >= 1.2.0... yes checking for libcurl >= 7.17... yes checking for libevent_pthreads >= 2.0... yes checking for a Python interpreter with version >= 2.7... python checking for python... /usr/bin/python checking for python version... 2.7 checking for python platform... linux2 checking for python script directory... ${prefix}/lib64/python2.7/site-packages checking for python extension module directory... ${exec_prefix}/lib64/python2.7/site-packages checking for SHA1_Init in -lcrypto... yes found library crypto checking for openssl... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating include/Makefile config.status: creating lib/Makefile config.status: creating lib/libseafile.pc config.status: creating common/Makefile config.status: creating common/cdc/Makefile config.status: creating common/index/Makefile config.status: creating daemon/Makefile config.status: creating app/Makefile config.status: creating doc/Makefile config.status: creating python/Makefile config.status: creating python/seafile/Makefile config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands configure: WARNING: unrecognized options: --enable-riak, --enable-fuse, --enable-client, --enable-server, --enable-python make all-recursive make[1]: Entering directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6' Making all in include make[2]: Entering directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/include' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/include' Making all in lib make[2]: Entering directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/lib' rm -f repo.c task.c /usr/bin/valac -C --pkg posix repo.vala task.vala make all-am make[3]: Entering directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/lib' /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I../include -I../lib -I../common -pthread -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include/searpc -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -Wall -O2 -fPIC -MT repo.lo -MD -MP -MF .deps/repo.Tpo -c -o repo.lo repo.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I../include -I../lib -I../common -pthread -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include/searpc -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -Wall -O2 -fPIC -MT repo.lo -MD -MP -MF .deps/repo.Tpo -c repo.c -fPIC -DPIC -o .libs/repo.o repo.c: In function ‘seafile_repo_set_head_cmmt_id’: repo.c:760:19: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] 760 | old_value = seafile_repo_get_head_cmmt_id (self); | ^ repo.c: In function ‘seafile_repo_set_root’: repo.c:787:19: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] 787 | old_value = seafile_repo_get_root (self); | ^ repo.c: In function ‘seafile_repo_set_repo_id’: repo.c:814:19: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] 814 | old_value = seafile_repo_get_repo_id (self); | ^ repo.c: In function ‘seafile_repo_set_repo_name’: repo.c:841:19: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] 841 | old_value = seafile_repo_get_repo_name (self); | ^ repo.c: In function ‘seafile_repo_set_repo_desc’: repo.c:868:19: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] 868 | old_value = seafile_repo_get_repo_desc (self); | ^ repo.c: In function ‘seafile_repo_set_magic’: repo.c:939:19: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] 939 | old_value = seafile_repo_get_magic (self); | ^ repo.c: In function ‘seafile_repo_set_random_key’: repo.c:988:19: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] 988 | old_value = seafile_repo_get_random_key (self); | ^ repo.c: In function ‘seafile_repo_set_salt’: repo.c:1015:19: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] 1015 | old_value = seafile_repo_get_salt (self); | ^ repo.c: In function ‘seafile_repo_set_origin_repo_id’: repo.c:1176:19: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] 1176 | old_value = seafile_repo_get_origin_repo_id (self); | ^ repo.c: In function ‘seafile_repo_set_origin_repo_name’: repo.c:1203:19: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] 1203 | old_value = seafile_repo_get_origin_repo_name (self); | ^ repo.c: In function ‘seafile_repo_set_origin_path’: repo.c:1230:19: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] 1230 | old_value = seafile_repo_get_origin_path (self); | ^ repo.c: In function ‘seafile_repo_set_virtual_perm’: repo.c:1279:19: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] 1279 | old_value = seafile_repo_get_virtual_perm (self); | ^ repo.c: In function ‘seafile_repo_set_store_id’: repo.c:1306:19: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] 1306 | old_value = seafile_repo_get_store_id (self); | ^ repo.c: In function ‘seafile_repo_set_share_type’: repo.c:1377:19: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] 1377 | old_value = seafile_repo_get_share_type (self); | ^ repo.c: In function ‘seafile_repo_set_permission’: repo.c:1404:19: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] 1404 | old_value = seafile_repo_get_permission (self); | ^ repo.c: In function ‘seafile_repo_set_user’: repo.c:1431:19: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] 1431 | old_value = seafile_repo_get_user (self); | ^ In file included from /usr/include/glib-2.0/glib/gthread.h:32, from /usr/include/glib-2.0/glib/gasyncqueue.h:32, from /usr/include/glib-2.0/glib.h:32, from /usr/include/glib-2.0/gobject/gbinding.h:28, from /usr/include/glib-2.0/glib-object.h:22, from repo.c:4: repo.c: In function ‘seafile_repo_get_type’: /usr/include/glib-2.0/glib/gatomic.h:113:5: warning: argument 2 of ‘__atomic_load’ discards ‘volatile’ qualifier [-Wincompatible-pointer-types] 113 | __atomic_load (gapg_temp_atomic, &gapg_temp_newval, __ATOMIC_SEQ_CST); \ | ^~~~~~~~~~~~~ /usr/include/glib-2.0/glib/gthread.h:260:7: note: in expansion of macro ‘g_atomic_pointer_get’ 260 | (!g_atomic_pointer_get (location) && \ | ^~~~~~~~~~~~~~~~~~~~ repo.c:1582:13: note: in expansion of macro ‘g_once_init_enter’ 1582 | if (g_once_init_enter (&seafile_repo_type_id__volatile)) { | ^~~~~~~~~~~~~~~~~ repo.c: In function ‘seafile_sync_task_set_repo_id’: repo.c:1901:19: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] 1901 | old_value = seafile_sync_task_get_repo_id (self); | ^ repo.c: In function ‘seafile_sync_task_set_state’: repo.c:1928:19: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] 1928 | old_value = seafile_sync_task_get_state (self); | ^ In file included from /usr/include/glib-2.0/glib/gthread.h:32, from /usr/include/glib-2.0/glib/gasyncqueue.h:32, from /usr/include/glib-2.0/glib.h:32, from /usr/include/glib-2.0/gobject/gbinding.h:28, from /usr/include/glib-2.0/glib-object.h:22, from repo.c:4: repo.c: In function ‘seafile_sync_task_get_type’: /usr/include/glib-2.0/glib/gatomic.h:113:5: warning: argument 2 of ‘__atomic_load’ discards ‘volatile’ qualifier [-Wincompatible-pointer-types] 113 | __atomic_load (gapg_temp_atomic, &gapg_temp_newval, __ATOMIC_SEQ_CST); \ | ^~~~~~~~~~~~~ /usr/include/glib-2.0/glib/gthread.h:260:7: note: in expansion of macro ‘g_atomic_pointer_get’ 260 | (!g_atomic_pointer_get (location) && \ | ^~~~~~~~~~~~~~~~~~~~ repo.c:2006:13: note: in expansion of macro ‘g_once_init_enter’ 2006 | if (g_once_init_enter (&seafile_sync_task_type_id__volatile)) { | ^~~~~~~~~~~~~~~~~ repo.c: In function ‘seafile_session_info_set_datadir’: repo.c:2105:19: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] 2105 | old_value = seafile_session_info_get_datadir (self); | ^ In file included from /usr/include/glib-2.0/glib/gthread.h:32, from /usr/include/glib-2.0/glib/gasyncqueue.h:32, from /usr/include/glib-2.0/glib.h:32, from /usr/include/glib-2.0/gobject/gbinding.h:28, from /usr/include/glib-2.0/glib-object.h:22, from repo.c:4: repo.c: In function ‘seafile_session_info_get_type’: /usr/include/glib-2.0/glib/gatomic.h:113:5: warning: argument 2 of ‘__atomic_load’ discards ‘volatile’ qualifier [-Wincompatible-pointer-types] 113 | __atomic_load (gapg_temp_atomic, &gapg_temp_newval, __ATOMIC_SEQ_CST); \ | ^~~~~~~~~~~~~ /usr/include/glib-2.0/glib/gthread.h:260:7: note: in expansion of macro ‘g_atomic_pointer_get’ 260 | (!g_atomic_pointer_get (location) && \ | ^~~~~~~~~~~~~~~~~~~~ repo.c:2157:13: note: in expansion of macro ‘g_once_init_enter’ 2157 | if (g_once_init_enter (&seafile_session_info_type_id__volatile)) { | ^~~~~~~~~~~~~~~~~ repo.c: In function ‘seafile_diff_entry_set_status’: repo.c:2238:19: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] 2238 | old_value = seafile_diff_entry_get_status (self); | ^ repo.c: In function ‘seafile_diff_entry_set_name’: repo.c:2265:19: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] 2265 | old_value = seafile_diff_entry_get_name (self); | ^ repo.c: In function ‘seafile_diff_entry_set_new_name’: repo.c:2292:19: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] 2292 | old_value = seafile_diff_entry_get_new_name (self); | ^ In file included from /usr/include/glib-2.0/glib/gthread.h:32, from /usr/include/glib-2.0/glib/gasyncqueue.h:32, from /usr/include/glib-2.0/glib.h:32, from /usr/include/glib-2.0/gobject/gbinding.h:28, from /usr/include/glib-2.0/glib-object.h:22, from repo.c:4: repo.c: In function ‘seafile_diff_entry_get_type’: /usr/include/glib-2.0/glib/gatomic.h:113:5: warning: argument 2 of ‘__atomic_load’ discards ‘volatile’ qualifier [-Wincompatible-pointer-types] 113 | __atomic_load (gapg_temp_atomic, &gapg_temp_newval, __ATOMIC_SEQ_CST); \ | ^~~~~~~~~~~~~ /usr/include/glib-2.0/glib/gthread.h:260:7: note: in expansion of macro ‘g_atomic_pointer_get’ 260 | (!g_atomic_pointer_get (location) && \ | ^~~~~~~~~~~~~~~~~~~~ repo.c:2348:13: note: in expansion of macro ‘g_once_init_enter’ 2348 | if (g_once_init_enter (&seafile_diff_entry_type_id__volatile)) { | ^~~~~~~~~~~~~~~~~ repo.c: In function ‘seafile_encryption_info_set_repo_id’: repo.c:2441:19: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] 2441 | old_value = seafile_encryption_info_get_repo_id (self); | ^ repo.c: In function ‘seafile_encryption_info_set_passwd’: repo.c:2468:19: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] 2468 | old_value = seafile_encryption_info_get_passwd (self); | ^ repo.c: In function ‘seafile_encryption_info_set_magic’: repo.c:2517:19: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] 2517 | old_value = seafile_encryption_info_get_magic (self); | ^ repo.c: In function ‘seafile_encryption_info_set_random_key’: repo.c:2544:19: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] 2544 | old_value = seafile_encryption_info_get_random_key (self); | ^ repo.c: In function ‘seafile_encryption_info_set_salt’: repo.c:2571:19: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] 2571 | old_value = seafile_encryption_info_get_salt (self); | ^ In file included from /usr/include/glib-2.0/glib/gthread.h:32, from /usr/include/glib-2.0/glib/gasyncqueue.h:32, from /usr/include/glib-2.0/glib.h:32, from /usr/include/glib-2.0/gobject/gbinding.h:28, from /usr/include/glib-2.0/glib-object.h:22, from repo.c:4: repo.c: In function ‘seafile_encryption_info_get_type’: /usr/include/glib-2.0/glib/gatomic.h:113:5: warning: argument 2 of ‘__atomic_load’ discards ‘volatile’ qualifier [-Wincompatible-pointer-types] 113 | __atomic_load (gapg_temp_atomic, &gapg_temp_newval, __ATOMIC_SEQ_CST); \ | ^~~~~~~~~~~~~ /usr/include/glib-2.0/glib/gthread.h:260:7: note: in expansion of macro ‘g_atomic_pointer_get’ 260 | (!g_atomic_pointer_get (location) && \ | ^~~~~~~~~~~~~~~~~~~~ repo.c:2632:13: note: in expansion of macro ‘g_once_init_enter’ 2632 | if (g_once_init_enter (&seafile_encryption_info_type_id__volatile)) { | ^~~~~~~~~~~~~~~~~ repo.c: In function ‘seafile_file_sync_error_set_repo_id’: repo.c:2765:19: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] 2765 | old_value = seafile_file_sync_error_get_repo_id (self); | ^ repo.c: In function ‘seafile_file_sync_error_set_repo_name’: repo.c:2792:19: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] 2792 | old_value = seafile_file_sync_error_get_repo_name (self); | ^ repo.c: In function ‘seafile_file_sync_error_set_path’: repo.c:2819:19: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] 2819 | old_value = seafile_file_sync_error_get_path (self); | ^ In file included from /usr/include/glib-2.0/glib/gthread.h:32, from /usr/include/glib-2.0/glib/gasyncqueue.h:32, from /usr/include/glib-2.0/glib.h:32, from /usr/include/glib-2.0/gobject/gbinding.h:28, from /usr/include/glib-2.0/glib-object.h:22, from repo.c:4: repo.c: In function ‘seafile_file_sync_error_get_type’: /usr/include/glib-2.0/glib/gatomic.h:113:5: warning: argument 2 of ‘__atomic_load’ discards ‘volatile’ qualifier [-Wincompatible-pointer-types] 113 | __atomic_load (gapg_temp_atomic, &gapg_temp_newval, __ATOMIC_SEQ_CST); \ | ^~~~~~~~~~~~~ /usr/include/glib-2.0/glib/gthread.h:260:7: note: in expansion of macro ‘g_atomic_pointer_get’ 260 | (!g_atomic_pointer_get (location) && \ | ^~~~~~~~~~~~~~~~~~~~ repo.c:2922:13: note: in expansion of macro ‘g_once_init_enter’ 2922 | if (g_once_init_enter (&seafile_file_sync_error_type_id__volatile)) { | ^~~~~~~~~~~~~~~~~ mv -f .deps/repo.Tpo .deps/repo.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I../include -I../lib -I../common -pthread -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include/searpc -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -Wall -O2 -fPIC -MT task.lo -MD -MP -MF .deps/task.Tpo -c -o task.lo task.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I../include -I../lib -I../common -pthread -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include/searpc -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -Wall -O2 -fPIC -MT task.lo -MD -MP -MF .deps/task.Tpo -c task.c -fPIC -DPIC -o .libs/task.o task.c: In function ‘seafile_task_set_ttype’: task.c:217:19: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] 217 | old_value = seafile_task_get_ttype (self); | ^ task.c: In function ‘seafile_task_set_repo_id’: task.c:244:19: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] 244 | old_value = seafile_task_get_repo_id (self); | ^ task.c: In function ‘seafile_task_set_state’: task.c:271:19: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] 271 | old_value = seafile_task_get_state (self); | ^ task.c: In function ‘seafile_task_set_rt_state’: task.c:298:19: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] 298 | old_value = seafile_task_get_rt_state (self); | ^ In file included from /usr/include/glib-2.0/glib/gthread.h:32, from /usr/include/glib-2.0/glib/gasyncqueue.h:32, from /usr/include/glib-2.0/glib.h:32, from /usr/include/glib-2.0/gobject/gbinding.h:28, from /usr/include/glib-2.0/glib-object.h:22, from task.c:4: task.c: In function ‘seafile_task_get_type’: /usr/include/glib-2.0/glib/gatomic.h:113:5: warning: argument 2 of ‘__atomic_load’ discards ‘volatile’ qualifier [-Wincompatible-pointer-types] 113 | __atomic_load (gapg_temp_atomic, &gapg_temp_newval, __ATOMIC_SEQ_CST); \ | ^~~~~~~~~~~~~ /usr/include/glib-2.0/glib/gthread.h:260:7: note: in expansion of macro ‘g_atomic_pointer_get’ 260 | (!g_atomic_pointer_get (location) && \ | ^~~~~~~~~~~~~~~~~~~~ task.c:471:13: note: in expansion of macro ‘g_once_init_enter’ 471 | if (g_once_init_enter (&seafile_task_type_id__volatile)) { | ^~~~~~~~~~~~~~~~~ task.c: In function ‘seafile_clone_task_set_state’: task.c:600:19: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] 600 | old_value = seafile_clone_task_get_state (self); | ^ task.c: In function ‘seafile_clone_task_set_repo_id’: task.c:649:19: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] 649 | old_value = seafile_clone_task_get_repo_id (self); | ^ task.c: In function ‘seafile_clone_task_set_repo_name’: task.c:676:19: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] 676 | old_value = seafile_clone_task_get_repo_name (self); | ^ task.c: In function ‘seafile_clone_task_set_worktree’: task.c:703:19: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] 703 | old_value = seafile_clone_task_get_worktree (self); | ^ In file included from /usr/include/glib-2.0/glib/gthread.h:32, from /usr/include/glib-2.0/glib/gasyncqueue.h:32, from /usr/include/glib-2.0/glib.h:32, from /usr/include/glib-2.0/gobject/gbinding.h:28, from /usr/include/glib-2.0/glib-object.h:22, from task.c:4: task.c: In function ‘seafile_clone_task_get_type’: /usr/include/glib-2.0/glib/gatomic.h:113:5: warning: argument 2 of ‘__atomic_load’ discards ‘volatile’ qualifier [-Wincompatible-pointer-types] 113 | __atomic_load (gapg_temp_atomic, &gapg_temp_newval, __ATOMIC_SEQ_CST); \ | ^~~~~~~~~~~~~ /usr/include/glib-2.0/glib/gthread.h:260:7: note: in expansion of macro ‘g_atomic_pointer_get’ 260 | (!g_atomic_pointer_get (location) && \ | ^~~~~~~~~~~~~~~~~~~~ task.c:762:13: note: in expansion of macro ‘g_once_init_enter’ 762 | if (g_once_init_enter (&seafile_clone_task_type_id__volatile)) { | ^~~~~~~~~~~~~~~~~ mv -f .deps/task.Tpo .deps/task.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I../include -I../lib -I../common -pthread -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include/searpc -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -Wall -O2 -fPIC -MT seafile-rpc-wrapper.lo -MD -MP -MF .deps/seafile-rpc-wrapper.Tpo -c -o seafile-rpc-wrapper.lo seafile-rpc-wrapper.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I../include -I../lib -I../common -pthread -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include/searpc -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -Wall -O2 -fPIC -MT seafile-rpc-wrapper.lo -MD -MP -MF .deps/seafile-rpc-wrapper.Tpo -c seafile-rpc-wrapper.c -fPIC -DPIC -o .libs/seafile-rpc-wrapper.o mv -f .deps/seafile-rpc-wrapper.Tpo .deps/seafile-rpc-wrapper.Plo /bin/sh ../libtool --tag=CC --mode=link gcc -O2 -fPIC -no-undefined -o libseafile.la -rpath /usr/lib64 repo.lo task.lo seafile-rpc-wrapper.lo -lglib-2.0 -lgobject-2.0 -lglib-2.0 -lsearpc -lgio-2.0 -lgobject-2.0 -lglib-2.0 -ljansson libtool: link: gcc -shared -fPIC -DPIC .libs/repo.o .libs/task.o .libs/seafile-rpc-wrapper.o -lsearpc -lgio-2.0 -lgobject-2.0 -lglib-2.0 -ljansson -O2 -Wl,-soname -Wl,libseafile.so.0 -o .libs/libseafile.so.0.0.0 libtool: link: (cd ".libs" && rm -f "libseafile.so.0" && ln -s "libseafile.so.0.0.0" "libseafile.so.0") libtool: link: (cd ".libs" && rm -f "libseafile.so" && ln -s "libseafile.so.0.0.0" "libseafile.so") libtool: link: ( cd ".libs" && rm -f "libseafile.la" && ln -s "../libseafile.la" "libseafile.la" ) /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I../include -I../lib -I../common -pthread -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include/searpc -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -Wall -O2 -fPIC -MT net.lo -MD -MP -MF .deps/net.Tpo -c -o net.lo net.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I../include -I../lib -I../common -pthread -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include/searpc -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -Wall -O2 -fPIC -MT net.lo -MD -MP -MF .deps/net.Tpo -c net.c -fPIC -DPIC -o .libs/net.o mv -f .deps/net.Tpo .deps/net.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I../include -I../lib -I../common -pthread -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include/searpc -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -Wall -O2 -fPIC -MT utils.lo -MD -MP -MF .deps/utils.Tpo -c -o utils.lo utils.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I../include -I../lib -I../common -pthread -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include/searpc -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -Wall -O2 -fPIC -MT utils.lo -MD -MP -MF .deps/utils.Tpo -c utils.c -fPIC -DPIC -o .libs/utils.o utils.c: In function ‘get_current_time’: utils.c:1722:5: warning: ‘GTimeVal’ is deprecated: Use 'GDateTime' instead [-Wdeprecated-declarations] 1722 | GTimeVal tv; | ^~~~~~~~ In file included from /usr/include/glib-2.0/glib/galloca.h:32, from /usr/include/glib-2.0/glib.h:30, from ../common/common.h:22, from utils.c:3: /usr/include/glib-2.0/glib/gtypes.h:547:8: note: declared here 547 | struct _GTimeVal | ^~~~~~~~~ utils.c:1725:5: warning: ‘g_get_current_time’ is deprecated: Use 'g_get_real_time' instead [-Wdeprecated-declarations] 1725 | g_get_current_time (&tv); | ^~~~~~~~~~~~~~~~~~ In file included from /usr/include/glib-2.0/glib/giochannel.h:33, from /usr/include/glib-2.0/glib.h:54, from ../common/common.h:22, from utils.c:3: /usr/include/glib-2.0/glib/gmain.h:688:8: note: declared here 688 | void g_get_current_time (GTimeVal *result); | ^~~~~~~~~~~~~~~~~~ mv -f .deps/utils.Tpo .deps/utils.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I../include -I../lib -I../common -pthread -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include/searpc -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -Wall -O2 -fPIC -MT db.lo -MD -MP -MF .deps/db.Tpo -c -o db.lo db.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I../include -I../lib -I../common -pthread -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include/searpc -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -Wall -O2 -fPIC -MT db.lo -MD -MP -MF .deps/db.Tpo -c db.c -fPIC -DPIC -o .libs/db.o mv -f .deps/db.Tpo .deps/db.Plo /bin/sh ../libtool --tag=CC --mode=link gcc -O2 -fPIC -no-undefined -o libseafile_common.la repo.lo task.lo net.lo utils.lo db.lo -lglib-2.0 -lgobject-2.0 -lglib-2.0 -luuid -lsqlite3 -levent -lsearpc -lgio-2.0 -lgobject-2.0 -lglib-2.0 -ljansson -lz libtool: link: ar cru .libs/libseafile_common.a .libs/repo.o .libs/task.o .libs/net.o .libs/utils.o .libs/db.o libtool: link: ranlib .libs/libseafile_common.a libtool: link: ( cd ".libs" && rm -f "libseafile_common.la" && ln -s "../libseafile_common.la" "libseafile_common.la" ) make[3]: Leaving directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/lib' make[2]: Leaving directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/lib' Making all in common make[2]: Entering directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/common' Making all in cdc make[3]: Entering directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/common/cdc' /bin/sh ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../.. -I../../common -I../../lib -Wall -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -O2 -fPIC -MT cdc.lo -MD -MP -MF .deps/cdc.Tpo -c -o cdc.lo cdc.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../.. -I../../common -I../../lib -Wall -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -O2 -fPIC -MT cdc.lo -MD -MP -MF .deps/cdc.Tpo -c cdc.c -fPIC -DPIC -o .libs/cdc.o mv -f .deps/cdc.Tpo .deps/cdc.Plo /bin/sh ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../.. -I../../common -I../../lib -Wall -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -O2 -fPIC -MT rabin-checksum.lo -MD -MP -MF .deps/rabin-checksum.Tpo -c -o rabin-checksum.lo rabin-checksum.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../.. -I../../common -I../../lib -Wall -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -O2 -fPIC -MT rabin-checksum.lo -MD -MP -MF .deps/rabin-checksum.Tpo -c rabin-checksum.c -fPIC -DPIC -o .libs/rabin-checksum.o mv -f .deps/rabin-checksum.Tpo .deps/rabin-checksum.Plo /bin/sh ../../libtool --tag=CC --mode=link gcc -I../../common -I../../lib -Wall -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -O2 -fPIC -Wl,-z -Wl,defs -o libcdc.la cdc.lo rabin-checksum.lo -lglib-2.0 ../../lib/libseafile_common.la libtool: link: (cd .libs/libcdc.lax/libseafile_common.a && ar x "/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/common/cdc/../../lib/.libs/libseafile_common.a") libtool: link: ar cru .libs/libcdc.a .libs/cdc.o .libs/rabin-checksum.o .libs/libcdc.lax/libseafile_common.a/db.o .libs/libcdc.lax/libseafile_common.a/net.o .libs/libcdc.lax/libseafile_common.a/repo.o .libs/libcdc.lax/libseafile_common.a/task.o .libs/libcdc.lax/libseafile_common.a/utils.o libtool: link: ranlib .libs/libcdc.a libtool: link: rm -fr .libs/libcdc.lax libtool: link: ( cd ".libs" && rm -f "libcdc.la" && ln -s "../libcdc.la" "libcdc.la" ) make[3]: Leaving directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/common/cdc' Making all in index make[3]: Entering directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/common/index' /bin/sh ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../.. -Wall -I../../common -I../../lib -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -O2 -fPIC -MT libindex_la-index.lo -MD -MP -MF .deps/libindex_la-index.Tpo -c -o libindex_la-index.lo `test -f 'index.c' || echo './'`index.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../.. -Wall -I../../common -I../../lib -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -O2 -fPIC -MT libindex_la-index.lo -MD -MP -MF .deps/libindex_la-index.Tpo -c index.c -fPIC -DPIC -o .libs/libindex_la-index.o mv -f .deps/libindex_la-index.Tpo .deps/libindex_la-index.Plo /bin/sh ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../.. -Wall -I../../common -I../../lib -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -O2 -fPIC -MT libindex_la-cache-tree.lo -MD -MP -MF .deps/libindex_la-cache-tree.Tpo -c -o libindex_la-cache-tree.lo `test -f 'cache-tree.c' || echo './'`cache-tree.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../.. -Wall -I../../common -I../../lib -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -O2 -fPIC -MT libindex_la-cache-tree.lo -MD -MP -MF .deps/libindex_la-cache-tree.Tpo -c cache-tree.c -fPIC -DPIC -o .libs/libindex_la-cache-tree.o mv -f .deps/libindex_la-cache-tree.Tpo .deps/libindex_la-cache-tree.Plo /bin/sh ../../libtool --tag=CC --mode=link gcc -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -O2 -fPIC -Wl,-z -Wl,defs -o libindex.la libindex_la-index.lo libindex_la-cache-tree.lo -lglib-2.0 ../../lib/libseafile_common.la libtool: link: (cd .libs/libindex.lax/libseafile_common.a && ar x "/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/common/index/../../lib/.libs/libseafile_common.a") libtool: link: ar cru .libs/libindex.a .libs/libindex_la-index.o .libs/libindex_la-cache-tree.o .libs/libindex.lax/libseafile_common.a/db.o .libs/libindex.lax/libseafile_common.a/net.o .libs/libindex.lax/libseafile_common.a/repo.o .libs/libindex.lax/libseafile_common.a/task.o .libs/libindex.lax/libseafile_common.a/utils.o libtool: link: ranlib .libs/libindex.a libtool: link: rm -fr .libs/libindex.lax libtool: link: ( cd ".libs" && rm -f "libindex.la" && ln -s "../libindex.la" "libindex.la" ) make[3]: Leaving directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/common/index' make[3]: Entering directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/common' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/common' make[2]: Leaving directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/common' Making all in daemon make[2]: Entering directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/daemon' gcc -DHAVE_CONFIG_H -I. -I.. -DPKGDATADIR=\"/usr/share/seafile\" -DPACKAGE_DATA_DIR=\""/usr/share/seafile"\" -DSEAFILE_CLIENT -D__USE_MINGW_ANSI_STDIO=1 -I../include -I../lib -I../lib -I../common -pthread -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include/searpc -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -Wall -O2 -fPIC -MT seaf-daemon.o -MD -MP -MF .deps/seaf-daemon.Tpo -c -o seaf-daemon.o seaf-daemon.c mv -f .deps/seaf-daemon.Tpo .deps/seaf-daemon.Po gcc -DHAVE_CONFIG_H -I. -I.. -DPKGDATADIR=\"/usr/share/seafile\" -DPACKAGE_DATA_DIR=\""/usr/share/seafile"\" -DSEAFILE_CLIENT -D__USE_MINGW_ANSI_STDIO=1 -I../include -I../lib -I../lib -I../common -pthread -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include/searpc -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -Wall -O2 -fPIC -MT job-mgr.o -MD -MP -MF .deps/job-mgr.Tpo -c -o job-mgr.o job-mgr.c mv -f .deps/job-mgr.Tpo .deps/job-mgr.Po gcc -DHAVE_CONFIG_H -I. -I.. -DPKGDATADIR=\"/usr/share/seafile\" -DPACKAGE_DATA_DIR=\""/usr/share/seafile"\" -DSEAFILE_CLIENT -D__USE_MINGW_ANSI_STDIO=1 -I../include -I../lib -I../lib -I../common -pthread -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include/searpc -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -Wall -O2 -fPIC -MT timer.o -MD -MP -MF .deps/timer.Tpo -c -o timer.o timer.c mv -f .deps/timer.Tpo .deps/timer.Po gcc -DHAVE_CONFIG_H -I. -I.. -DPKGDATADIR=\"/usr/share/seafile\" -DPACKAGE_DATA_DIR=\""/usr/share/seafile"\" -DSEAFILE_CLIENT -D__USE_MINGW_ANSI_STDIO=1 -I../include -I../lib -I../lib -I../common -pthread -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include/searpc -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -Wall -O2 -fPIC -MT cevent.o -MD -MP -MF .deps/cevent.Tpo -c -o cevent.o cevent.c mv -f .deps/cevent.Tpo .deps/cevent.Po gcc -DHAVE_CONFIG_H -I. -I.. -DPKGDATADIR=\"/usr/share/seafile\" -DPACKAGE_DATA_DIR=\""/usr/share/seafile"\" -DSEAFILE_CLIENT -D__USE_MINGW_ANSI_STDIO=1 -I../include -I../lib -I../lib -I../common -pthread -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include/searpc -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -Wall -O2 -fPIC -MT http-tx-mgr.o -MD -MP -MF .deps/http-tx-mgr.Tpo -c -o http-tx-mgr.o http-tx-mgr.c mv -f .deps/http-tx-mgr.Tpo .deps/http-tx-mgr.Po gcc -DHAVE_CONFIG_H -I. -I.. -DPKGDATADIR=\"/usr/share/seafile\" -DPACKAGE_DATA_DIR=\""/usr/share/seafile"\" -DSEAFILE_CLIENT -D__USE_MINGW_ANSI_STDIO=1 -I../include -I../lib -I../lib -I../common -pthread -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include/searpc -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -Wall -O2 -fPIC -MT vc-utils.o -MD -MP -MF .deps/vc-utils.Tpo -c -o vc-utils.o vc-utils.c mv -f .deps/vc-utils.Tpo .deps/vc-utils.Po gcc -DHAVE_CONFIG_H -I. -I.. -DPKGDATADIR=\"/usr/share/seafile\" -DPACKAGE_DATA_DIR=\""/usr/share/seafile"\" -DSEAFILE_CLIENT -D__USE_MINGW_ANSI_STDIO=1 -I../include -I../lib -I../lib -I../common -pthread -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include/searpc -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -Wall -O2 -fPIC -MT sync-mgr.o -MD -MP -MF .deps/sync-mgr.Tpo -c -o sync-mgr.o sync-mgr.c mv -f .deps/sync-mgr.Tpo .deps/sync-mgr.Po gcc -DHAVE_CONFIG_H -I. -I.. -DPKGDATADIR=\"/usr/share/seafile\" -DPACKAGE_DATA_DIR=\""/usr/share/seafile"\" -DSEAFILE_CLIENT -D__USE_MINGW_ANSI_STDIO=1 -I../include -I../lib -I../lib -I../common -pthread -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include/searpc -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -Wall -O2 -fPIC -MT seafile-session.o -MD -MP -MF .deps/seafile-session.Tpo -c -o seafile-session.o seafile-session.c mv -f .deps/seafile-session.Tpo .deps/seafile-session.Po gcc -DHAVE_CONFIG_H -I. -I.. -DPKGDATADIR=\"/usr/share/seafile\" -DPACKAGE_DATA_DIR=\""/usr/share/seafile"\" -DSEAFILE_CLIENT -D__USE_MINGW_ANSI_STDIO=1 -I../include -I../lib -I../lib -I../common -pthread -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include/searpc -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -Wall -O2 -fPIC -MT seafile-crypt.o -MD -MP -MF .deps/seafile-crypt.Tpo -c -o seafile-crypt.o `test -f '../common/seafile-crypt.c' || echo './'`../common/seafile-crypt.c mv -f .deps/seafile-crypt.Tpo .deps/seafile-crypt.Po gcc -DHAVE_CONFIG_H -I. -I.. -DPKGDATADIR=\"/usr/share/seafile\" -DPACKAGE_DATA_DIR=\""/usr/share/seafile"\" -DSEAFILE_CLIENT -D__USE_MINGW_ANSI_STDIO=1 -I../include -I../lib -I../lib -I../common -pthread -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include/searpc -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -Wall -O2 -fPIC -MT diff-simple.o -MD -MP -MF .deps/diff-simple.Tpo -c -o diff-simple.o `test -f '../common/diff-simple.c' || echo './'`../common/diff-simple.c mv -f .deps/diff-simple.Tpo .deps/diff-simple.Po gcc -DHAVE_CONFIG_H -I. -I.. -DPKGDATADIR=\"/usr/share/seafile\" -DPACKAGE_DATA_DIR=\""/usr/share/seafile"\" -DSEAFILE_CLIENT -D__USE_MINGW_ANSI_STDIO=1 -I../include -I../lib -I../lib -I../common -pthread -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include/searpc -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -Wall -O2 -fPIC -MT wt-monitor.o -MD -MP -MF .deps/wt-monitor.Tpo -c -o wt-monitor.o wt-monitor.c mv -f .deps/wt-monitor.Tpo .deps/wt-monitor.Po gcc -DHAVE_CONFIG_H -I. -I.. -DPKGDATADIR=\"/usr/share/seafile\" -DPACKAGE_DATA_DIR=\""/usr/share/seafile"\" -DSEAFILE_CLIENT -D__USE_MINGW_ANSI_STDIO=1 -I../include -I../lib -I../lib -I../common -pthread -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include/searpc -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -Wall -O2 -fPIC -MT wt-monitor-linux.o -MD -MP -MF .deps/wt-monitor-linux.Tpo -c -o wt-monitor-linux.o wt-monitor-linux.c mv -f .deps/wt-monitor-linux.Tpo .deps/wt-monitor-linux.Po gcc -DHAVE_CONFIG_H -I. -I.. -DPKGDATADIR=\"/usr/share/seafile\" -DPACKAGE_DATA_DIR=\""/usr/share/seafile"\" -DSEAFILE_CLIENT -D__USE_MINGW_ANSI_STDIO=1 -I../include -I../lib -I../lib -I../common -pthread -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include/searpc -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -Wall -O2 -fPIC -MT wt-monitor-structs.o -MD -MP -MF .deps/wt-monitor-structs.Tpo -c -o wt-monitor-structs.o wt-monitor-structs.c mv -f .deps/wt-monitor-structs.Tpo .deps/wt-monitor-structs.Po gcc -DHAVE_CONFIG_H -I. -I.. -DPKGDATADIR=\"/usr/share/seafile\" -DPACKAGE_DATA_DIR=\""/usr/share/seafile"\" -DSEAFILE_CLIENT -D__USE_MINGW_ANSI_STDIO=1 -I../include -I../lib -I../lib -I../common -pthread -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include/searpc -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -Wall -O2 -fPIC -MT clone-mgr.o -MD -MP -MF .deps/clone-mgr.Tpo -c -o clone-mgr.o clone-mgr.c mv -f .deps/clone-mgr.Tpo .deps/clone-mgr.Po gcc -DHAVE_CONFIG_H -I. -I.. -DPKGDATADIR=\"/usr/share/seafile\" -DPACKAGE_DATA_DIR=\""/usr/share/seafile"\" -DSEAFILE_CLIENT -D__USE_MINGW_ANSI_STDIO=1 -I../include -I../lib -I../lib -I../common -pthread -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include/searpc -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -Wall -O2 -fPIC -MT seafile-config.o -MD -MP -MF .deps/seafile-config.Tpo -c -o seafile-config.o seafile-config.c mv -f .deps/seafile-config.Tpo .deps/seafile-config.Po gcc -DHAVE_CONFIG_H -I. -I.. -DPKGDATADIR=\"/usr/share/seafile\" -DPACKAGE_DATA_DIR=\""/usr/share/seafile"\" -DSEAFILE_CLIENT -D__USE_MINGW_ANSI_STDIO=1 -I../include -I../lib -I../lib -I../common -pthread -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include/searpc -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -Wall -O2 -fPIC -MT seafile-error.o -MD -MP -MF .deps/seafile-error.Tpo -c -o seafile-error.o seafile-error.c mv -f .deps/seafile-error.Tpo .deps/seafile-error.Po gcc -DHAVE_CONFIG_H -I. -I.. -DPKGDATADIR=\"/usr/share/seafile\" -DPACKAGE_DATA_DIR=\""/usr/share/seafile"\" -DSEAFILE_CLIENT -D__USE_MINGW_ANSI_STDIO=1 -I../include -I../lib -I../lib -I../common -pthread -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include/searpc -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -Wall -O2 -fPIC -MT branch-mgr.o -MD -MP -MF .deps/branch-mgr.Tpo -c -o branch-mgr.o `test -f '../common/branch-mgr.c' || echo './'`../common/branch-mgr.c mv -f .deps/branch-mgr.Tpo .deps/branch-mgr.Po gcc -DHAVE_CONFIG_H -I. -I.. -DPKGDATADIR=\"/usr/share/seafile\" -DPACKAGE_DATA_DIR=\""/usr/share/seafile"\" -DSEAFILE_CLIENT -D__USE_MINGW_ANSI_STDIO=1 -I../include -I../lib -I../lib -I../common -pthread -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include/searpc -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -Wall -O2 -fPIC -MT fs-mgr.o -MD -MP -MF .deps/fs-mgr.Tpo -c -o fs-mgr.o `test -f '../common/fs-mgr.c' || echo './'`../common/fs-mgr.c ../common/fs-mgr.c: In function ‘seaf_dirent_dup’: ../common/fs-mgr.c:1365:5: warning: ‘g_memdup’ is deprecated: Use 'g_memdup2' instead [-Wdeprecated-declarations] 1365 | new_dent = g_memdup (dent, sizeof(SeafDirent)); | ^~~~~~~~ In file included from /usr/include/glib-2.0/glib.h:82, from ../common/common.h:22, from ../common/fs-mgr.c:3: /usr/include/glib-2.0/glib/gstrfuncs.h:257:23: note: declared here 257 | gpointer g_memdup (gconstpointer mem, | ^~~~~~~~ mv -f .deps/fs-mgr.Tpo .deps/fs-mgr.Po gcc -DHAVE_CONFIG_H -I. -I.. -DPKGDATADIR=\"/usr/share/seafile\" -DPACKAGE_DATA_DIR=\""/usr/share/seafile"\" -DSEAFILE_CLIENT -D__USE_MINGW_ANSI_STDIO=1 -I../include -I../lib -I../lib -I../common -pthread -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include/searpc -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -Wall -O2 -fPIC -MT repo-mgr.o -MD -MP -MF .deps/repo-mgr.Tpo -c -o repo-mgr.o repo-mgr.c repo-mgr.c: In function ‘seaf_repo_manager_is_ignored_hidden_file’: repo-mgr.c:1154:9: warning: ‘g_pattern_match_string’ is deprecated: Use 'g_pattern_spec_match_string' instead [-Wdeprecated-declarations] 1154 | if (g_pattern_match_string(*spec, filename)) | ^~ In file included from /usr/include/glib-2.0/glib.h:65, from ../common/common.h:22, from repo-mgr.c:3: /usr/include/glib-2.0/glib/gpattern.h:55:15: note: declared here 55 | gboolean g_pattern_match_string (GPatternSpec *pspec, | ^~~~~~~~~~~~~~~~~~~~~~ repo-mgr.c: In function ‘should_ignore’: repo-mgr.c:1181:9: warning: ‘g_pattern_match_string’ is deprecated: Use 'g_pattern_spec_match_string' instead [-Wdeprecated-declarations] 1181 | if (g_pattern_match_string(*spec, filename)) | ^~ In file included from /usr/include/glib-2.0/glib.h:65, from ../common/common.h:22, from repo-mgr.c:3: /usr/include/glib-2.0/glib/gpattern.h:55:15: note: declared here 55 | gboolean g_pattern_match_string (GPatternSpec *pspec, | ^~~~~~~~~~~~~~~~~~~~~~ repo-mgr.c:1189:13: warning: ‘g_pattern_match_string’ is deprecated: Use 'g_pattern_spec_match_string' instead [-Wdeprecated-declarations] 1189 | if (g_pattern_match_string(*spec, filename)) | ^~ In file included from /usr/include/glib-2.0/glib.h:65, from ../common/common.h:22, from repo-mgr.c:3: /usr/include/glib-2.0/glib/gpattern.h:55:15: note: declared here 55 | gboolean g_pattern_match_string (GPatternSpec *pspec, | ^~~~~~~~~~~~~~~~~~~~~~ repo-mgr.c: In function ‘ignore_xlsx_update’: repo-mgr.c:3253:5: warning: ‘g_pattern_match_string’ is deprecated: Use 'g_pattern_spec_match_string' instead [-Wdeprecated-declarations] 3253 | if (!g_pattern_match_string(pattern, src_path) && | ^~ In file included from /usr/include/glib-2.0/glib.h:65, from ../common/common.h:22, from repo-mgr.c:3: /usr/include/glib-2.0/glib/gpattern.h:55:15: note: declared here 55 | gboolean g_pattern_match_string (GPatternSpec *pspec, | ^~~~~~~~~~~~~~~~~~~~~~ repo-mgr.c:3254:9: warning: ‘g_pattern_match_string’ is deprecated: Use 'g_pattern_spec_match_string' instead [-Wdeprecated-declarations] 3254 | g_pattern_match_string(pattern, dst_path)) | ^~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/glib-2.0/glib.h:65, from ../common/common.h:22, from repo-mgr.c:3: /usr/include/glib-2.0/glib/gpattern.h:55:15: note: declared here 55 | gboolean g_pattern_match_string (GPatternSpec *pspec, | ^~~~~~~~~~~~~~~~~~~~~~ repo-mgr.c: In function ‘is_seafile_backup_file’: repo-mgr.c:3267:5: warning: ‘g_pattern_match_string’ is deprecated: Use 'g_pattern_spec_match_string' instead [-Wdeprecated-declarations] 3267 | if (g_pattern_match_string(pattern, path)) | ^~ In file included from /usr/include/glib-2.0/glib.h:65, from ../common/common.h:22, from repo-mgr.c:3: /usr/include/glib-2.0/glib/gpattern.h:55:15: note: declared here 55 | gboolean g_pattern_match_string (GPatternSpec *pspec, | ^~~~~~~~~~~~~~~~~~~~~~ repo-mgr.c: In function ‘is_built_in_ignored_file’: repo-mgr.c:5081:9: warning: ‘g_pattern_match_string’ is deprecated: Use 'g_pattern_spec_match_string' instead [-Wdeprecated-declarations] 5081 | if (g_pattern_match_string(*spec, filename)) | ^~ In file included from /usr/include/glib-2.0/glib.h:65, from ../common/common.h:22, from repo-mgr.c:3: /usr/include/glib-2.0/glib/gpattern.h:55:15: note: declared here 55 | gboolean g_pattern_match_string (GPatternSpec *pspec, | ^~~~~~~~~~~~~~~~~~~~~~ repo-mgr.c:5089:13: warning: ‘g_pattern_match_string’ is deprecated: Use 'g_pattern_spec_match_string' instead [-Wdeprecated-declarations] 5089 | if (g_pattern_match_string(*spec, filename)) | ^~ In file included from /usr/include/glib-2.0/glib.h:65, from ../common/common.h:22, from repo-mgr.c:3: /usr/include/glib-2.0/glib/gpattern.h:55:15: note: declared here 55 | gboolean g_pattern_match_string (GPatternSpec *pspec, | ^~~~~~~~~~~~~~~~~~~~~~ repo-mgr.c: In function ‘seaf_repo_check_ignore_file’: repo-mgr.c:7327:9: warning: ‘g_pattern_match_string’ is deprecated: Use 'g_pattern_spec_match_string' instead [-Wdeprecated-declarations] 7327 | if (g_pattern_match_string(ignore_spec, str)) { | ^~ In file included from /usr/include/glib-2.0/glib.h:65, from ../common/common.h:22, from repo-mgr.c:3: /usr/include/glib-2.0/glib/gpattern.h:55:15: note: declared here 55 | gboolean g_pattern_match_string (GPatternSpec *pspec, | ^~~~~~~~~~~~~~~~~~~~~~ mv -f .deps/repo-mgr.Tpo .deps/repo-mgr.Po gcc -DHAVE_CONFIG_H -I. -I.. -DPKGDATADIR=\"/usr/share/seafile\" -DPACKAGE_DATA_DIR=\""/usr/share/seafile"\" -DSEAFILE_CLIENT -D__USE_MINGW_ANSI_STDIO=1 -I../include -I../lib -I../lib -I../common -pthread -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include/searpc -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -Wall -O2 -fPIC -MT commit-mgr.o -MD -MP -MF .deps/commit-mgr.Tpo -c -o commit-mgr.o `test -f '../common/commit-mgr.c' || echo './'`../common/commit-mgr.c mv -f .deps/commit-mgr.Tpo .deps/commit-mgr.Po gcc -DHAVE_CONFIG_H -I. -I.. -DPKGDATADIR=\"/usr/share/seafile\" -DPACKAGE_DATA_DIR=\""/usr/share/seafile"\" -DSEAFILE_CLIENT -D__USE_MINGW_ANSI_STDIO=1 -I../include -I../lib -I../lib -I../common -pthread -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include/searpc -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -Wall -O2 -fPIC -MT log.o -MD -MP -MF .deps/log.Tpo -c -o log.o `test -f '../common/log.c' || echo './'`../common/log.c mv -f .deps/log.Tpo .deps/log.Po gcc -DHAVE_CONFIG_H -I. -I.. -DPKGDATADIR=\"/usr/share/seafile\" -DPACKAGE_DATA_DIR=\""/usr/share/seafile"\" -DSEAFILE_CLIENT -D__USE_MINGW_ANSI_STDIO=1 -I../include -I../lib -I../lib -I../common -pthread -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include/searpc -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -Wall -O2 -fPIC -MT rpc-service.o -MD -MP -MF .deps/rpc-service.Tpo -c -o rpc-service.o `test -f '../common/rpc-service.c' || echo './'`../common/rpc-service.c mv -f .deps/rpc-service.Tpo .deps/rpc-service.Po gcc -DHAVE_CONFIG_H -I. -I.. -DPKGDATADIR=\"/usr/share/seafile\" -DPACKAGE_DATA_DIR=\""/usr/share/seafile"\" -DSEAFILE_CLIENT -D__USE_MINGW_ANSI_STDIO=1 -I../include -I../lib -I../lib -I../common -pthread -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include/searpc -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -Wall -O2 -fPIC -MT vc-common.o -MD -MP -MF .deps/vc-common.Tpo -c -o vc-common.o `test -f '../common/vc-common.c' || echo './'`../common/vc-common.c mv -f .deps/vc-common.Tpo .deps/vc-common.Po gcc -DHAVE_CONFIG_H -I. -I.. -DPKGDATADIR=\"/usr/share/seafile\" -DPACKAGE_DATA_DIR=\""/usr/share/seafile"\" -DSEAFILE_CLIENT -D__USE_MINGW_ANSI_STDIO=1 -I../include -I../lib -I../lib -I../common -pthread -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include/searpc -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -Wall -O2 -fPIC -MT obj-store.o -MD -MP -MF .deps/obj-store.Tpo -c -o obj-store.o `test -f '../common/obj-store.c' || echo './'`../common/obj-store.c mv -f .deps/obj-store.Tpo .deps/obj-store.Po gcc -DHAVE_CONFIG_H -I. -I.. -DPKGDATADIR=\"/usr/share/seafile\" -DPACKAGE_DATA_DIR=\""/usr/share/seafile"\" -DSEAFILE_CLIENT -D__USE_MINGW_ANSI_STDIO=1 -I../include -I../lib -I../lib -I../common -pthread -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include/searpc -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -Wall -O2 -fPIC -MT obj-backend-fs.o -MD -MP -MF .deps/obj-backend-fs.Tpo -c -o obj-backend-fs.o `test -f '../common/obj-backend-fs.c' || echo './'`../common/obj-backend-fs.c ../common/obj-backend-fs.c: In function ‘obj_backend_fs_write’: ../common/obj-backend-fs.c:229:43: warning: ‘.XXXXXX’ directive output may be truncated writing 7 bytes into a region of size between 1 and 4096 [-Wformat-truncation=] 229 | snprintf (tmp_path, SEAF_PATH_MAX, "%s.XXXXXX", path); | ^~~~~~~ ../common/obj-backend-fs.c:229:5: note: ‘snprintf’ output between 8 and 4103 bytes into a destination of size 4096 229 | snprintf (tmp_path, SEAF_PATH_MAX, "%s.XXXXXX", path); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ mv -f .deps/obj-backend-fs.Tpo .deps/obj-backend-fs.Po gcc -DHAVE_CONFIG_H -I. -I.. -DPKGDATADIR=\"/usr/share/seafile\" -DPACKAGE_DATA_DIR=\""/usr/share/seafile"\" -DSEAFILE_CLIENT -D__USE_MINGW_ANSI_STDIO=1 -I../include -I../lib -I../lib -I../common -pthread -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include/searpc -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -Wall -O2 -fPIC -MT block-mgr.o -MD -MP -MF .deps/block-mgr.Tpo -c -o block-mgr.o `test -f '../common/block-mgr.c' || echo './'`../common/block-mgr.c mv -f .deps/block-mgr.Tpo .deps/block-mgr.Po gcc -DHAVE_CONFIG_H -I. -I.. -DPKGDATADIR=\"/usr/share/seafile\" -DPACKAGE_DATA_DIR=\""/usr/share/seafile"\" -DSEAFILE_CLIENT -D__USE_MINGW_ANSI_STDIO=1 -I../include -I../lib -I../lib -I../common -pthread -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include/searpc -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -Wall -O2 -fPIC -MT block-backend.o -MD -MP -MF .deps/block-backend.Tpo -c -o block-backend.o `test -f '../common/block-backend.c' || echo './'`../common/block-backend.c mv -f .deps/block-backend.Tpo .deps/block-backend.Po gcc -DHAVE_CONFIG_H -I. -I.. -DPKGDATADIR=\"/usr/share/seafile\" -DPACKAGE_DATA_DIR=\""/usr/share/seafile"\" -DSEAFILE_CLIENT -D__USE_MINGW_ANSI_STDIO=1 -I../include -I../lib -I../lib -I../common -pthread -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include/searpc -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -Wall -O2 -fPIC -MT block-backend-fs.o -MD -MP -MF .deps/block-backend-fs.Tpo -c -o block-backend-fs.o `test -f '../common/block-backend-fs.c' || echo './'`../common/block-backend-fs.c mv -f .deps/block-backend-fs.Tpo .deps/block-backend-fs.Po gcc -DHAVE_CONFIG_H -I. -I.. -DPKGDATADIR=\"/usr/share/seafile\" -DPACKAGE_DATA_DIR=\""/usr/share/seafile"\" -DSEAFILE_CLIENT -D__USE_MINGW_ANSI_STDIO=1 -I../include -I../lib -I../lib -I../common -pthread -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include/searpc -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -Wall -O2 -fPIC -MT mq-mgr.o -MD -MP -MF .deps/mq-mgr.Tpo -c -o mq-mgr.o `test -f '../common/mq-mgr.c' || echo './'`../common/mq-mgr.c mv -f .deps/mq-mgr.Tpo .deps/mq-mgr.Po gcc -DHAVE_CONFIG_H -I. -I.. -DPKGDATADIR=\"/usr/share/seafile\" -DPACKAGE_DATA_DIR=\""/usr/share/seafile"\" -DSEAFILE_CLIENT -D__USE_MINGW_ANSI_STDIO=1 -I../include -I../lib -I../lib -I../common -pthread -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include/searpc -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -Wall -O2 -fPIC -MT curl-init.o -MD -MP -MF .deps/curl-init.Tpo -c -o curl-init.o `test -f '../common/curl-init.c' || echo './'`../common/curl-init.c mv -f .deps/curl-init.Tpo .deps/curl-init.Po gcc -DHAVE_CONFIG_H -I. -I.. -DPKGDATADIR=\"/usr/share/seafile\" -DPACKAGE_DATA_DIR=\""/usr/share/seafile"\" -DSEAFILE_CLIENT -D__USE_MINGW_ANSI_STDIO=1 -I../include -I../lib -I../lib -I../common -pthread -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include/searpc -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -Wall -O2 -fPIC -MT sync-status-tree.o -MD -MP -MF .deps/sync-status-tree.Tpo -c -o sync-status-tree.o sync-status-tree.c mv -f .deps/sync-status-tree.Tpo .deps/sync-status-tree.Po gcc -DHAVE_CONFIG_H -I. -I.. -DPKGDATADIR=\"/usr/share/seafile\" -DPACKAGE_DATA_DIR=\""/usr/share/seafile"\" -DSEAFILE_CLIENT -D__USE_MINGW_ANSI_STDIO=1 -I../include -I../lib -I../lib -I../common -pthread -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include/searpc -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -Wall -O2 -fPIC -MT filelock-mgr.o -MD -MP -MF .deps/filelock-mgr.Tpo -c -o filelock-mgr.o filelock-mgr.c mv -f .deps/filelock-mgr.Tpo .deps/filelock-mgr.Po gcc -DHAVE_CONFIG_H -I. -I.. -DPKGDATADIR=\"/usr/share/seafile\" -DPACKAGE_DATA_DIR=\""/usr/share/seafile"\" -DSEAFILE_CLIENT -D__USE_MINGW_ANSI_STDIO=1 -I../include -I../lib -I../lib -I../common -pthread -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include/searpc -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -Wall -O2 -fPIC -MT set-perm.o -MD -MP -MF .deps/set-perm.Tpo -c -o set-perm.o set-perm.c mv -f .deps/set-perm.Tpo .deps/set-perm.Po gcc -DHAVE_CONFIG_H -I. -I.. -DPKGDATADIR=\"/usr/share/seafile\" -DPACKAGE_DATA_DIR=\""/usr/share/seafile"\" -DSEAFILE_CLIENT -D__USE_MINGW_ANSI_STDIO=1 -I../include -I../lib -I../lib -I../common -pthread -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include/searpc -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -Wall -O2 -fPIC -MT change-set.o -MD -MP -MF .deps/change-set.Tpo -c -o change-set.o change-set.c mv -f .deps/change-set.Tpo .deps/change-set.Po /bin/sh ../libtool --tag=CC --mode=link gcc -DPKGDATADIR=\"/usr/share/seafile\" -DPACKAGE_DATA_DIR=\""/usr/share/seafile"\" -DSEAFILE_CLIENT -D__USE_MINGW_ANSI_STDIO=1 -I../include -I../lib -I../lib -I../common -pthread -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include/searpc -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -Wall -O2 -fPIC -o seaf-daemon seaf-daemon.o job-mgr.o timer.o cevent.o http-tx-mgr.o vc-utils.o sync-mgr.o seafile-session.o seafile-crypt.o diff-simple.o wt-monitor.o wt-monitor-linux.o wt-monitor-structs.o clone-mgr.o seafile-config.o seafile-error.o branch-mgr.o fs-mgr.o repo-mgr.o commit-mgr.o log.o rpc-service.o vc-common.o obj-store.o obj-backend-fs.o block-mgr.o block-backend.o block-backend-fs.o mq-mgr.o curl-init.o sync-status-tree.o filelock-mgr.o set-perm.o change-set.o ../lib/libseafile_common.la -lglib-2.0 -lgobject-2.0 -lglib-2.0 -lssl -lcrypto -luuid -lsqlite3 -levent -levent_pthreads -levent ../common/cdc/libcdc.la ../common/index/libindex.la -lsearpc -lgio-2.0 -lgobject-2.0 -lglib-2.0 -ljansson -ljansson -lz -lcurl libtool: link: gcc -DPKGDATADIR=\"/usr/share/seafile\" -DPACKAGE_DATA_DIR=\"/usr/share/seafile\" -DSEAFILE_CLIENT -D__USE_MINGW_ANSI_STDIO=1 -I../include -I../lib -I../lib -I../common -pthread -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include -I/usr/src/slapt-src/libraries/libsearpc/package-libsearpc/usr/include/searpc -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -Wall -O2 -fPIC -o seaf-daemon seaf-daemon.o job-mgr.o timer.o cevent.o http-tx-mgr.o vc-utils.o sync-mgr.o seafile-session.o seafile-crypt.o diff-simple.o wt-monitor.o wt-monitor-linux.o wt-monitor-structs.o clone-mgr.o seafile-config.o seafile-error.o branch-mgr.o fs-mgr.o repo-mgr.o commit-mgr.o log.o rpc-service.o vc-common.o obj-store.o obj-backend-fs.o block-mgr.o block-backend.o block-backend-fs.o mq-mgr.o curl-init.o sync-status-tree.o filelock-mgr.o set-perm.o change-set.o ../lib/.libs/libseafile_common.a -lssl -lcrypto -levent_pthreads ../common/cdc/.libs/libcdc.a ../common/index/.libs/libindex.a -luuid -lsqlite3 -levent -lsearpc -lgio-2.0 -lgobject-2.0 -lglib-2.0 -ljansson -lz -lcurl -pthread make[2]: Leaving directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/daemon' Making all in app make[2]: Entering directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/app' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/app' Making all in doc make[2]: Entering directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/doc' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/doc' Making all in python make[2]: Entering directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/python' Making all in seafile make[3]: Entering directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/python/seafile' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/python/seafile' make[3]: Entering directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/python' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/python' make[2]: Leaving directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/python' make[2]: Entering directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6' make[2]: Leaving directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6' make[1]: Leaving directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6' if test -z 'strip'; then \ make INSTALL_PROGRAM="/bin/sh /usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/install-sh -c -s" \ install_sh_PROGRAM="/bin/sh /usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/install-sh -c -s" INSTALL_STRIP_FLAG=-s \ install; \ else \ make INSTALL_PROGRAM="/bin/sh /usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/install-sh -c -s" \ install_sh_PROGRAM="/bin/sh /usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/install-sh -c -s" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='strip'" install; \ fi make[1]: Entering directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6' Making install in include make[2]: Entering directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/include' make[3]: Entering directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/include' make[3]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/usr/src/slapt-src-x86_64/network/seafile-server/package-seafile-server/usr/include/seafile' /usr/bin/ginstall -c -m 644 seafile-rpc.h seafile.h seafile-error.h '/usr/src/slapt-src-x86_64/network/seafile-server/package-seafile-server/usr/include/seafile' make[3]: Leaving directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/include' make[2]: Leaving directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/include' Making install in lib make[2]: Entering directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/lib' make install-am make[3]: Entering directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/lib' make[4]: Entering directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/lib' /usr/bin/mkdir -p '/usr/src/slapt-src-x86_64/network/seafile-server/package-seafile-server/usr/lib64' /bin/sh ../libtool --mode=install /usr/bin/ginstall -c -s libseafile.la '/usr/src/slapt-src-x86_64/network/seafile-server/package-seafile-server/usr/lib64' libtool: install: /usr/bin/ginstall -c .libs/libseafile.so.0.0.0 /usr/src/slapt-src-x86_64/network/seafile-server/package-seafile-server/usr/lib64/libseafile.so.0.0.0 libtool: install: strip --strip-unneeded /usr/src/slapt-src-x86_64/network/seafile-server/package-seafile-server/usr/lib64/libseafile.so.0.0.0 libtool: install: (cd /usr/src/slapt-src-x86_64/network/seafile-server/package-seafile-server/usr/lib64 && { ln -s -f libseafile.so.0.0.0 libseafile.so.0 || { rm -f libseafile.so.0 && ln -s libseafile.so.0.0.0 libseafile.so.0; }; }) libtool: install: (cd /usr/src/slapt-src-x86_64/network/seafile-server/package-seafile-server/usr/lib64 && { ln -s -f libseafile.so.0.0.0 libseafile.so || { rm -f libseafile.so && ln -s libseafile.so.0.0.0 libseafile.so; }; }) libtool: install: /usr/bin/ginstall -c .libs/libseafile.lai /usr/src/slapt-src-x86_64/network/seafile-server/package-seafile-server/usr/lib64/libseafile.la libtool: warning: remember to run 'libtool --finish /usr/lib64' /usr/bin/sed -i "s|(DESTDIR)|/usr/src/slapt-src-x86_64/network/seafile-server/package-seafile-server|g" libseafile.pc /usr/bin/mkdir -p '/usr/src/slapt-src-x86_64/network/seafile-server/package-seafile-server/usr/lib64/pkgconfig' /usr/bin/ginstall -c -m 644 libseafile.pc '/usr/src/slapt-src-x86_64/network/seafile-server/package-seafile-server/usr/lib64/pkgconfig' /usr/bin/mkdir -p '/usr/src/slapt-src-x86_64/network/seafile-server/package-seafile-server/usr/include/seafile' /usr/bin/ginstall -c -m 644 seafile-object.h '/usr/src/slapt-src-x86_64/network/seafile-server/package-seafile-server/usr/include/seafile' make[4]: Leaving directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/lib' make[3]: Leaving directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/lib' make[2]: Leaving directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/lib' Making install in common make[2]: Entering directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/common' Making install in cdc make[3]: Entering directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/common/cdc' make[4]: Entering directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/common/cdc' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/common/cdc' make[3]: Leaving directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/common/cdc' Making install in index make[3]: Entering directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/common/index' make[4]: Entering directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/common/index' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/common/index' make[3]: Leaving directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/common/index' make[3]: Entering directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/common' make[4]: Entering directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/common' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/common' make[3]: Leaving directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/common' make[2]: Leaving directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/common' Making install in daemon make[2]: Entering directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/daemon' make[3]: Entering directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/daemon' /usr/bin/mkdir -p '/usr/src/slapt-src-x86_64/network/seafile-server/package-seafile-server/usr/bin' STRIPPROG='strip' /bin/sh ../libtool --mode=install /bin/sh /usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/install-sh -c -s seaf-daemon '/usr/src/slapt-src-x86_64/network/seafile-server/package-seafile-server/usr/bin' libtool: install: /bin/sh /usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/install-sh -c -s seaf-daemon /usr/src/slapt-src-x86_64/network/seafile-server/package-seafile-server/usr/bin/seaf-daemon make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/daemon' make[2]: Leaving directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/daemon' Making install in app make[2]: Entering directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/app' make[3]: Entering directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/app' /usr/bin/mkdir -p '/usr/src/slapt-src-x86_64/network/seafile-server/package-seafile-server/usr/bin' /usr/bin/ginstall -c seaf-cli '/usr/src/slapt-src-x86_64/network/seafile-server/package-seafile-server/usr/bin' make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/app' make[2]: Leaving directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/app' Making install in doc make[2]: Entering directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/doc' make[3]: Entering directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/doc' make[3]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/usr/src/slapt-src-x86_64/network/seafile-server/package-seafile-server/usr/man/man1' /usr/bin/ginstall -c -m 644 seaf-daemon.1 seaf-cli.1 '/usr/src/slapt-src-x86_64/network/seafile-server/package-seafile-server/usr/man/man1' make[3]: Leaving directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/doc' make[2]: Leaving directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/doc' Making install in python make[2]: Entering directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/python' Making install in seafile make[3]: Entering directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/python/seafile' make[4]: Entering directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/python/seafile' make[4]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/usr/src/slapt-src-x86_64/network/seafile-server/package-seafile-server/usr/lib64/python2.7/site-packages/seafile' /usr/bin/ginstall -c -m 644 __init__.py rpcclient.py '/usr/src/slapt-src-x86_64/network/seafile-server/package-seafile-server/usr/lib64/python2.7/site-packages/seafile' Byte-compiling python modules... __init__.pyrpcclient.py Byte-compiling python modules (optimized versions) ... __init__.pyrpcclient.py make[4]: Leaving directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/python/seafile' make[3]: Leaving directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/python/seafile' make[3]: Entering directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/python' make[4]: Entering directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/python' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/python' make[3]: Leaving directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/python' make[2]: Leaving directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6/python' make[2]: Entering directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6' make[3]: Entering directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6' make[2]: Leaving directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6' make[1]: Leaving directory '/usr/src/slapt-src-x86_64/network/seafile-server/seafile-8.0.6' Slackware package maker, version 3.14159265. Searching for symbolic links: usr/lib64/libseafile.so libseafile.so.0.0.0 usr/lib64/libseafile.so.0 libseafile.so.0.0.0 Making symbolic link creation script: ( cd usr/lib64 ; rm -rf libseafile.so ) ( cd usr/lib64 ; ln -sf libseafile.so.0.0.0 libseafile.so ) ( cd usr/lib64 ; rm -rf libseafile.so.0 ) ( cd usr/lib64 ; ln -sf libseafile.so.0.0.0 libseafile.so.0 ) It is recommended that you make these lines your new installation script. Would you like to make this stuff the install script for this package and remove the symbolic links ([y]es, [n]o)? y Removing symbolic links: removed './usr/lib64/libseafile.so.0' removed './usr/lib64/libseafile.so' Creating your new ./install/doinst.sh... This next step is optional - you can set the directories in your package to some sane permissions. If any of the directories in your package have special permissions, then DO NOT reset them here! Would you like to reset all directory permissions to 755 (drwxr-xr-x) and directory ownerships to root.root ([y]es, [n]o)? n Creating Slackware package: /usr/src/slapt-src-x86_64/network/seafile-server/seafile-server-8.0.6-x86_64-2salix15.0.txz ./ install/ install/doinst.sh install/slack-desc opt/ opt/haiwen/ opt/haiwen/seafile-server/ opt/haiwen/seafile-server/scripts/ opt/haiwen/seafile-server/scripts/breakpad.py opt/haiwen/seafile-server/scripts/build/ opt/haiwen/seafile-server/scripts/build/build-cli.py opt/haiwen/seafile-server/scripts/build/build-deb.py opt/haiwen/seafile-server/scripts/build/build-mac-local.py opt/haiwen/seafile-server/scripts/build/build-mac.py opt/haiwen/seafile-server/scripts/build/build-msi-vs.py opt/haiwen/seafile-server/scripts/build/build-msi.py opt/haiwen/seafile-server/scripts/build/gen-deb-src.py opt/haiwen/seafile-server/scripts/build/notarize.sh opt/haiwen/seafile-server/scripts/build/osx.entitlements opt/haiwen/seafile-server/scripts/seaf-cli-wrapper.sh usr/ usr/bin/ usr/bin/seaf-cli usr/bin/seaf-daemon usr/doc/ usr/doc/seafile-server-8.0.6/ usr/doc/seafile-server-8.0.6/LICENSE.txt usr/doc/seafile-server-8.0.6/README.markdown usr/doc/seafile-server-8.0.6/seafile-server.SlackBuild usr/include/ usr/include/seafile/ usr/include/seafile/seafile-error.h usr/include/seafile/seafile-object.h usr/include/seafile/seafile-rpc.h usr/include/seafile/seafile.h usr/lib64/ usr/lib64/libseafile.so.0.0.0 usr/lib64/pkgconfig/ usr/lib64/pkgconfig/libseafile.pc usr/lib64/python2.7/ usr/lib64/python2.7/site-packages/ usr/lib64/python2.7/site-packages/seafile/ usr/lib64/python2.7/site-packages/seafile/__init__.py usr/lib64/python2.7/site-packages/seafile/__init__.pyc usr/lib64/python2.7/site-packages/seafile/__init__.pyo usr/lib64/python2.7/site-packages/seafile/rpcclient.py usr/lib64/python2.7/site-packages/seafile/rpcclient.pyc usr/lib64/python2.7/site-packages/seafile/rpcclient.pyo usr/man/ usr/man/man1/ usr/man/man1/seaf-cli.1.gz usr/man/man1/seaf-daemon.1.gz usr/sbin/ usr/sbin/seafile Slackware package /usr/src/slapt-src-x86_64/network/seafile-server/seafile-server-8.0.6-x86_64-2salix15.0.txz created. Installing package seafile-server-8.0.6-x86_64-2salix15.0... | seafile-server (Cloud Storage System) | | Seafile is a next-generation open source cloud storage system with | advanced support for file syncing, privacy protection and teamwork. | | Homepage: http://seafile.com/ | | | | | | |